Version: Defense rod for 2 figures. The replacement rods for the Connect & Play foosball table are Category 1 rods. Category 1 rods are suitable for foosball tables in private settings. They are slightly resistant to bending and are durable for normal household use. The replacement rods for the Connect & Play foosball table are perfectly straight and have a chrome coating. The inner walls of the rods are made of 2.2 mm steel. In testing laboratories, these rods withstand an 8-hour salt spray exposure. The foosball rods have a diameter of 15.8 mm, commonly referred to as 16 mm rods. Typically, foosball sliding bearings have a diameter of 16 mm, so the foosball rods are 0.2 mm thinner to ensure they run in the foosball table bearings with enough support but minimal friction. The rods have 4 mm holes for attaching the foosball figures. The holes are precisely drilled, accurately, and parallel through the center of the rods. This allows the screws for the foosball figures to be easily passed through the rods, ensuring the figures stand perfectly next to each other. For the position/distance of the drill holes, Sportime follows the German foosball tournament standard. The rods are suitable for all standard plastic foosball handles. The rods are available individually. For a team, you need: 1x defense rod for 2 figures (length 128.5 cm, holes (measured from the handle side) 58.6 cm and 82 cm), 1x midfield rod for 5 figures (length 104.1 cm, holes (measured from the handle side) 33.8 cm, 45.8 cm, 57.8 cm, 69.8 cm, 81.8 cm), 2x goal and striker rod with 3 figures or goalkeeper (length 116.9 cm, holes (measured from the handle side) 45.2 cm, 63.5 cm, 82.3 cm). You need 8 rods per foosball table. Rod type: hollow rod made of steel. Rod diameter: 15.8 mm. Diameter of figure screw holes: 4 mm. Wall thickness: 2.2 mm. Model: Connect.