Circulator CP15-1,5 0101W
The Ferran CP15-1.5 hot water circulator is mounted on an additional circulator, usually before the boiler or c.w.u. tank. The purpose of the pump is to continuously pressurise hot water in the section: from reservoir to last absorbing point, i.e. sink battery or group of absorbing points: batteries for baths, showers and washbasins. If hot water is not collected, it is cooled in the unit, so when the consumer Atsukos the battery from the source at a distance of 15 m, it must wait for the hot water to flow until the cold water is Nukris off the pipes, which takes about a few decades. With the circulating heat pump running, the water is already available within seconds, making it easier to use household appliances. Reliability and small size are the benefits of the new device.

Product data
Operating range: 0,1 to 0,7 m ³/h
Lifting height: max. 1.3 m
Liquid temperature: 2 °C or more, 95 °C or less
Suction fluid type: drinking water
Maximum pressure: 10 bar
Security class: IP 42
Insulation class: F
Voltage: 50-60 Hz, ~ 230V
Power consumption: 28W
Track gauge: 85 mm
Connector: G1/2
Ambient temperature: + 2 °C or more, + 40 °C or more