For installation in a masonry front wall in front of a solid wall, for WC fittings and TECE control plates, consisting of a TECE wet construction flushing cistern, safety tank made of plastic, flushing cistern completely pre-assembled and sealed, flushing cistern connection with 1/2" internal thread, 10 l tank volume, 6 l pre-set standard flush volume, 4.5/7.5/9 l flush volume adjustable at any time, 3 l partial flush with dual flush technology, remaining volume usable for immediate cleaning flush, condensation insulated, usable as a single or dual flush cistern depending on the control plate, tested according to DIN EN 14055, fitting group 1 according to DIN 4109, low-noise hydraulic filling valve L(ap) <= 17 dB(A) at 3 bar flow pressure, galvanized steel frame, 2 retaining bolts and nuts M 12, mounting distance 180 or 230 mm, WC outlet bend DN 90 with transition piece DN 90/100 made of PP, also suitable for horizontal installation.

Installation note according to § 13 NAV

Please note that devices with a connection value of 230V are delivered with either a protective contact plug or a fixed connection (without plug), depending on the power rating. If the device has a fixed connection, a qualified professional must be commissioned for installation. All devices with a connection value of 400V and above must be operated via a suitable high-voltage connection and may only be connected by a qualified electrician. For devices with a rated power of more than 12KW, approval from your network operator is required. Please contact the network operator or an installation company registered in the network operator's installer directory before installation. Such an installation company will assist you in obtaining the necessary approval from the respective network operator.