
Avisa Stainless steel bumper protection for VW ID.3 from 2019 until today
Rear
On this page you'll find a ranking of the best Avisa products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
High-quality brushed stainless steel bumper protection for the rear bumper
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, the strip protects the edge of the bumper thanks to the specially profiled bevelling.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Installation instructions:
- Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
- It is important that the surface to be covered is clean, dry and free of grease.
- The load sill protector is attached using the adhesive strips pre-mounted on the back.
- Please ensure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
- Then press down several times and you're done!
Avisa Stainless steel bumper protection for VW ID.3 from 2019 until today
Rear
High quality stainless steel bumper protection for Ford Fiesta from 2017 until today (5-door)
High quality stainless steel brushed bumper protection for the rear bumper
The bumper strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, thanks to the specially profiled bevelling, the strip protects the edge of the bumper.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Mounting instructions:
Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
It is important that the surface to be covered is clean, dry and free of grease.
The load sill protector is attached using the adhesive strips pre-mounted on the back.
Please make sure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
Then press on several times and you're done!
Avisa Stainless steel bumper protection for Ford Fiesta from 2017 until today
Rear
High-quality stainless steel bumper protection for VW Golf 7 Variant from 2013 to 2016
High quality stainless steel bumper protection brushed for the rear bumper
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, the strip protects the edge of the bumper thanks to the specially profiled bevelling.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Installation instructions:
- Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
- It is important that the surface to be covered is clean, dry and free of grease.
- The load sill protector is attached using the adhesive strips pre-mounted on the back.
- Please ensure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
- Then press down several times and you're done!
Avisa Stainless steel bumper protection for VW Golf 7 Variant from 2013 to 2016
Rear
High-quality stainless steel bumper protection for VW Golf 7 Variant from 2017 to 2020High-quality brushed stainless steel bumper protection for the rear bumperThe strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, thanks to the specially profiled bevelling, the strip protects the edge of the bumper.Ideal as protection for the bumper or to cover existing scratches.Bar is mounted over the rear bumperMaterial: Made of high-quality stainless steel (brushed)Absolutely rustproofAdhesive strips on the back; attached in a few minutesVehicle-specific, highest fitting accuracy, with folded edgeDistinguished and modern lookOptical upgrading of the vehicle rear end
Installation instructions:Before removing the protective film of the adhesive tape, check whether the bumper protection is intended for the surface to be covered.For installation, it is important that the surface to be covered on the vehicle is clean, dry and free of grease.Please make sure that the bumper protection is flush from the beginning. To position it centrally, you can orientate yourself on the lock's notch on the boot floor. Then press it on several times and you are done!
Avisa Stainless steel bumper protection for VW Golf 7 Variant from 2017 to 2020
Rear
High quality stainless steel bumper protection for Volvo XC60 from 2017 until today
High quality brushed stainless steel bumper protection for the rear bumper
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, the strip protects the edge of the bumper thanks to the specially profiled bevelling.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Installation instructions:
- Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
- It is important that the surface to be covered is clean, dry and free of grease.
- The load sill protector is attached using the adhesive strips pre-mounted on the back.
- Please ensure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
- Then press on several times and you're done!
Avisa Stainless steel bumper protection for Volvo XC60 from 2017 until today
Rear
High-quality brushed stainless steel bumper protection for the rear bumper
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, the strip protects the edge of the bumper thanks to the specially profiled bevelling.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Installation instructions:
- Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
- It is important that the surface to be covered is clean, dry and free of grease.
- The load sill protector is attached using the adhesive strips pre-mounted on the back.
- Please ensure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
- Then press down several times and you're done!
Avisa Stainless Steel Bumper Guard for Ford Kuga Titanium,Titanium X / Trend / Cool,Connect from 2019
Rear
High-quality stainless steel bumper protection for Skoda Fabia Combi (estate) from 2018 until today
High quality stainless steel bumper protection brushed for the rear bumper
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, the strip protects the edge of the bumper thanks to the specially profiled bevelling.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Installation instructions:
- Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
- It is important that the surface to be covered is clean, dry and free of grease.
- The load sill protector is attached using the adhesive strips pre-mounted on the back.
- Please ensure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
- Then press down several times and you're done!
Avisa Stainless steel bumper protection for Skoda Fabia Combi (estate) from 2018 until today
Rear
High-quality stainless steel bumper protection for VW Golf 7 Sedan from 2012 until today
High quality stainless steel bumper protection brushed for the rear bumper
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, the strip protects the edge of the bumper thanks to the specially profiled bevelling.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Installation instructions:
- Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
- It is important that the surface to be covered is clean, dry and free of grease.
- The load sill protector is attached using the adhesive strips pre-mounted on the back.
- Please ensure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
- Then press down several times and you're done!
Avisa Stainless steel bumper protection for VW Golf 7 Sedan from 2012 until today
Rear
High-quality stainless steel bumper protection for VW Crafter from 2017 until todayHigh-quality stainless steel bumper protection brushed for the rear bumper.
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, thanks to the specially profiled bevelling, the strip protects the edge of the bumper.
Ideal as protection for the bumper or to cover existing scratches.Strip is mounted over the rear bumperMaterial: Made of high-quality stainless steel (brushed)Absolutely rust-proofAdhesive strips on the back; attached in a few minutesVehicle-specific, highest fitting accuracy, with foldingDistinguished and modern lookOptical upgrading of the vehicle rear end.
Installation instructions:Before removing the protective film of the adhesive tape, check whether the bumper protection is intended for the surface to be covered.For installation, it is important that the surface to be covered on the vehicle is clean, dry and free of grease.Please make sure that the bumper protection is flush from the beginning. To position it centrally, you can orientate yourself on the lock's notch on the boot floor. Then press it on several times and you're done!
Avisa Stainless steel bumper protection for VW Crafter from 2017 until today
Rear
High quality stainless steel bumper protection for Volvo V60 from 2018 until today
High quality brushed stainless steel bumper protection for the rear bumper
The strip protects the bumper from mechanical damage to the upper side, which is used throughout when unloading and loading. In addition, the strip protects the edge of the bumper thanks to the specially profiled bevelling.
Ideal as protection for the bumper or to cover existing scratches.
The bar is mounted over the rear bumper.
Material: Made of high-quality stainless steel (brushed)
Absolutely rustproof
Adhesive strips on the back; fitted in a few minutes
Vehicle-specific, highest fitting accuracy, with folded edge
Stylish and modern look
Visual enhancement of the vehicle rear
Installation instructions:
- Before removing the protective film of the adhesive tape, check whether the load sill protector is intended for the surface to be covered.
- It is important that the surface to be covered is clean, dry and free of grease.
- The load sill protector is attached using the adhesive strips pre-mounted on the back.
- Please ensure that the load sill protector is flush from the start. To position it centrally, you can use the latch on the boot floor as a guide.
- Then press down several times and you're done!
Avisa Stainless steel bumper protection for Volvo V60 from 2018 until today
Rear