EP gelcoat colourless with hardener. Translucent (translucent, but not transparent) and can be coloured with colour pastes. Thixotropic (does not run) and produced under vacuum, ensuring it is optimally free of air bubbles and homogeneous. Not UV-resistant in the long term (yellowing may occur), so it should be protected from UV radiation with an additional varnish (clear or opaque colour varnishes) if required.

This colourless, non-running topcoat resin is suitable for fine layers (outer layer of laminates) and can be coloured opaquely with universal colour pastes or transparently/translucently with transparent colours. It can be applied by brush, roller, or spatula.

Consumption: approximately 0.3 kg/m².
Mixing ratio: 100 : 38 parts by weight resin to hardener.
Processing time (100 g preparation at 20 °C): 15 minutes.
Gelifying time (0.2 mm at 20 °C): approximately 1.5 hours.
Curing time (at 23 °C): 24 hours.

New, improved hardener quality: free from nonylphenol and DETA.
Storage: In unopened original containers, kept dark and above 15 °C, it lasts at least 2-3 years.