D-Sub connectors from Phoenix Contact SUBCON-PLUS RS-485. 9-pin fieldbus D-Sub connectors SUBCON-PLUS with two cable entries and a screw terminal block for each cable, enabling the implementation of fieldbus systems with RS-485 interfaces. The terminal blocks can be positioned at the top or bottom of the connector housing to allow cable entry from the left or right. The RS-485 D-Sub connectors SUBCON-PLUS for fieldbus systems feature high transmission speeds, good EMC with metallized ABS housings for shielding against electromagnetic interference, and accommodate cable cross-sections ranging from 6 to 10 mm². Order number 648-3489 is a 9-pin D-Sub socket with two cable entries angled at 35° for Modbus, Modbus-PLUS, BITBUS, ARCNET, MULT/MININET, SYSTEM 2003, P-NET. Order number 324-9371 is a 9-pin D-Sub socket with two cable entries angled at 35° for SUCONET-K1, K2, S-BUS, and J-BUS. Order number 324-9400 is a 9-pin D-Sub socket with two cable entries angled at 35° for Modbus and CEGELEC. Order numbers 801-8933 (plug) and 801-8964 (socket) are 9-pin D-Sub connectors with two cable entries angled at 35° for universal assignment. For a short fastening screw, see order number 801-8961. For a screwdriver, see order number 390-9663.