EUR118,65
Corsair LL120
120 mm, 3 x
Questions about Corsair LL120
What would you like to know?
0 questions and answers
Helpful answer
So does that mean I don't need a controller like this to control the LEDs? Corsair Commander Pro (External, 6x)
Thank you very much for your advice. I have reported the error internally in the system.
Helpful answer
The Commander Pro is not required. You can also control the fans via fan headers on the mainboard. The settings for this can be found in the Bios. If there are not enough connections on the mainboard, you can also use a Y-cable.
Not really, just connected mine to the power source.
You can control the fans. The RGB, however, can only be controlled via the Commander Pro.
You can connect two fans to one fan connection via a Y-cable. Otherwise, use a fan controller and then connect it directly to the power supply. RGB is controlled via the Corsair Hub!
The 3-pack also includes the Lightning Node so that you can control the LEDs.
Helpful answer
The hub in the three-pack has 6 connections, so you don't have to buy anything in addition 😉
Helpful answer
Hello, yes it should be possible. However, if it's an older watercooling system that only manages the speed of the fans, it won't be able to manage the coloured leds. It will be necessary to use the controller supplied with it for the led and the one for the fan to manage the speed.
Helpful answer
Yes, as long as it stays in the Corsair ecosystem. Everything is controlled via icue
Yes, with the corsair "icue" software, each led can be controlled individually.
Mainboard has too few connections for everything, if you have a lot from corsair I would recommend the module.
I think you can only check the specifications of the motherboard
by the colour probably 🤣😂
They should work, the fans installed are already 120mm. These fans can also be seen on the Corsair website, in the Corsair 275R Airflow.
Hello, these are the specifications for the operation of all 3 fans together. The air volume is also higher.
Helpful answer
Clear
Lieferumfang gemäss Hersteller: x3 LL120 RGB 120mm Dual Light Loop RGB LED PWM Fans x1 RGB Lighting Hub x1 CORSAIR Lighting Node PRO x2 Mounting Strips for Lighting Node PRO x12 Fan Mounting Screws
It is a defect, so if it is still under warranty, register it as a warranty claim.
Helpful answer
No. You need the RGB Commander available in the RGB Starter Kit. This kit is simply 3 extra fans for those who already have the control box.
They are also available in black, but the speed range is 600 - 1500. Corsair LL120 (120mm, 3x)
Helpful answer
If you buy a 3-pack with the splitter included, you get RGB via USB 2.0 interface :)
Hello, Mike.brisacher. What do you want to light up? The parts in the picture can also be bought separately. Write what you have and what you want to illuminate, maybe we can find a solution for your problem. Kind regards
Yes, I did it that way too.
30 of 133 questions