Safety switch with latching, plastic, holding force 1300 N, for example, SIMATIC ET200eco PN-F, spring force locked, with emergency release at the back, auxiliary release with lock at the front, magnetic voltage 24V, monitoring 1x door, monitoring 1x locking, M12 connector 8-pole, PIN1=11, PIN2=12, PIN3=41, PIN4=42, PIN5=n.a., PIN6=n.a., PIN7=E1, PIN8=E2. Actuator 3SE5000-0AV0/-0AW must be ordered separately. Connection accessories, e.g., for the SIMATIC ET200eco PN-F: Y-cable, 8-pole cable. Mechanical safety switches SIRIUS 3SE5 for position monitoring of movable protective devices. They ensure that protective doors, covers, or safety flaps/grids remain closed as long as a hazardous condition exists. The drive heads in screwless mounting can be rotated 4x90 degrees. There are 5 approach positions for the actuator, one of which is at the front. The switching elements ensure very high contact reliability and can only be switched with a separately coded actuator, which provides increased protection against tampering. LEDs conveniently indicate the current status of the device. The devices are approved worldwide. With the appropriate switch configuration, the highest safety requirements can be met. The devices are available with spring or magnetic force locking, in plastic with a holding force of 1300 N or metal with a holding force of 2300 N. A wide range of 3D coded actuators can be ordered. Some variants are optionally available with LED status indication. The 3SF1 series with direct connection to the AS-Interface bus system rounds off the portfolio. The actuator is not included in the delivery of the safety switches and must be ordered separately. Depending on the version, connectors and other connection accessories are available as accessories. Safety is a SIRIUS business.