Reliable control and lightning-fast triggering. The W1 TTL wireless remote control is designed for Fujifilm cameras with TTL functionality. It can directly control flashes that are integrated into the Walimex pro W1 receiver system (e.g., Light Shooter 360 TTL, Flash2Go 600 TTL) via radio (2.4 GHz). The camera with the attached W1 wireless trigger automatically controls the exposure in TTL mode, eliminating the need for manual adjustments. With the Walimex pro W1 TTL remote trigger, data is transmitted to the flash or multiple flashes simultaneously and triggered with minimal delay. The maximum synchronization time is 1/8,000 seconds (achievable with a maximum camera shutter speed of 1/8,000 seconds). If a slightly different exposure is desired in TTL mode, the exposure can be manually adjusted by up to three stops either up or down (in one-third stops). A multiple exposure series is also possible, creating an underexposed, a normally exposed, and an overexposed image based on the TTL readings, from which the appropriate one can be selected. The W1 TTL T-S remote trigger can control up to 5 flash groups (with one or more flashes) simultaneously.

Fully automatic or manual settings. As an alternative to fully automatic TTL exposure, you can also individually adjust the flash power using the W1 wireless control. Each flash or flash group can be controlled separately, allowing you to conveniently adjust hard-to-reach flashes during the shoot. The wireless remote supports not only the manual mode but also the Multi mode (strobe function). All relevant parameters such as the number of flashes, frequency, and power can be controlled via the remote. The maximum supported synchronization time is 1/8,000 seconds (achievable with a maximum camera shutter speed).