Best Montech products in the PC fans category
On this page you'll find a ranking of the best Montech products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Montech RX120 PWM ARGB fan - 120mm, white
Black case fan with nine white rotor blades. Digitally addressable RGB lighting with 20 LEDs. PWM-controlled speed range from 800 to 1,600 RPM. Includes rubber vibration dampers. High airflow volume of 100.24 m³/h.
The Montech RX120 PWM is a high-performance 120mm fan designed for use as a case fan. Nine reversed rotor blades provide an airflow volume of 100.24 m³/h and a static pressure of 1.8 mmH2O. The fan is regulated via a PWM signal in a speed range of 800 to 1,600 revolutions per minute.
At maximum speed, the Montech RX120 PWM produces a low noise level of 27 dB(A). The quiet hydraulic bearing and rubber vibration dampers ensure that no vibrations are transmitted to the case. The fan package includes four screws for mounting to the case and eight rubber dampers.
The Montech RX120 PWM features a black frame and black fan blades. The digitally addressable RGB lighting consists of twenty RGB LEDs located in the fan's edge.
Technical details:
- Dimensions: 120 x 120 x 25 mm (W x H x D)
- Material: Plastic, Rubber
- Color: White (frame), Gray (fan blades)
- Noise level: 27 dB(A)
- Speed: 800 - 1,600 RPM (-10 /+5 %)
- Airflow volume: 100.24 m³/h
- Air pressure: 1.8 mmH2O
- Lighting: RGB
- Number of LEDs: 20
- Operating voltage: 12 V
- Connectors: 4-pin PWM, RGB (3-pin).
2. Montech GF120 PWM
The Montech GF120 PWM is a powerful PC fan designed for efficient cooling and appealing lighting in computer cases. With a diameter of 120 mm and a height of 25 mm, this fan provides optimal airflow to regulate the temperature of components. The 4-pin PWM connector allows for precise control of fan speed, resulting in quiet operation. The maximum noise level of just 25.5 dB ensures that the fan is barely audible even under full load. The ARGB lighting gives the fan a modern aesthetic and can be configured in various ways to enhance the system's appearance. With a cable length of 0.53 m, the fan is flexible in installation and can be used in various cases.
- 4-pin PWM connector for precise speed control
- Maximum noise level of only 25.5 dB for quiet operation
- ARGB lighting for customization and modern design
- Optimal cooling performance with a diameter of 120 mm.
3. Montech RX140 PWM - white
The Montech RX140 PWM is a powerful 140mm fan designed for efficient cooling in PC cases. With a maximum speed of 1,600 RPM and an airflow of up to 153.76 m³/h, this fan provides excellent air circulation, which is particularly beneficial for high-performance systems. The static pressure of up to 2.90 mmH2O ensures that airflow is maintained even in denser configurations. The integrated RGB lighting in the frame allows for appealing visual design, while the flow-optimized design maximizes cooling performance. Additionally, the fan operates quietly with a noise level of only 27.9 dB(A), making it ideal for users who value a quiet working environment. Rubber pads at the corners minimize disruptive vibrations and contribute to the product's durability. The RX140 PWM is therefore an excellent choice for anyone seeking a combination of performance, aesthetics, and low noise.
- Reversed airflow for appealing installations
- Optimized for use in front of radiators or behind mesh
- Rubber pads for vibration decoupling
- Flow-optimized design for high cooling performance
- Quiet operating noise at maximum performance.
4. Montech HP140 ARGB PWM White
Dazzling visuals: Enhance your gaming experience with ARGB lighting. 8 vibrant LEDs provide uniform lighting effects.
Airflow mastery: Strong and quiet cooling. Fan speed: 600–1600 RPM (±10%). Airflow: 95.61 CFM. Static pressure: 2.95 mm H20. Noise level: 29.2 dBA.
Long-lasting, reliable operation: Enjoy unmatched reliability with sturdy rifle bearings and advanced lubrication, reducing friction and heat for superior efficiency and lasting performance.
Transform your setup: Enjoy unmatched style and shine with the HP140 fans.
Flexible options: Choose between single pack or 3-in-1 for your cooling needs.
5. Montech METAL PRO 12 ARGB (W)
Dazzling visuals: Enhance your gaming experience with ARGB lighting. 8 vibrant LEDs provide uniform lighting effects.
Turbocharged air pressure: Cool critical components in no time. Fan speed: 600–2200 RPM (±10%). Airflow: 76.2 CFM. Static pressure: 3.81 mm H20. Noise level: 29.1 dBA.
Fluid dynamic bearing: Experience long-lasting performance with fluid dynamic bearing (FDB) that reduces friction and noise, ensuring quieter operation and extended service life.
Precision cooling for AIO: Designed for optimal air pressure, METAL PRO 12 is perfectly tailored to maximize AIO cooling performance.
Unleash unrivaled cooling power: Experience the next evolution in cooling with this upgrade, featuring 12% faster speeds, 10% increased airflow, and 35% higher air pressure—all enhanced by striking ARGB lighting.
Flexible options: Choose between single pack or 3-in-1 for your cooling needs.
6. Montech AX140 PWM - white
Designed with modern aesthetic, the AX140 PWM integrates a total of 24 LEDs, and the hexagonal RGB ring on the frame elevates the design aesthetics. It features various lighting modes and supports 5V3PIN motherboard connectors for software control, allowing for complete customization of your build.
Built for system cooling performance, the AX140 PWM functions as a case, radiator, or radiator fan, covering all specifications and compatibility. The meticulous design, including the bending angle of the nine-blade fan, stabilizes airflow and significantly improves heat dissipation capacity while reducing noise during operation. The AX140 PWM delivers stable performance while cooling high-end builds.
For silent operation, the AX140 PWM uses a tailored frame and blades optimized for maximum quietness. Even at its highest RPM, the noise level remains under 27.9 dB(A), making it an excellent choice for your gaming build.
Featuring a durable rifle bearing, the AX140 PWM offers an extremely long lifespan of 80,000 hours. It has been proven to provide longer durability, longevity, and much lower noise compared to other hydraulic bearing fans.
With vibration-proof structures, the AX140 PWM includes eight rounded anti-vibration pads that reduce vibration and noise caused by resonance phenomena.
7. Montech RX140 PWM - black
The Montech RX140 PWM is a powerful 140mm RGB fan designed for optimal cooling in PC cases. With an innovative reversed airflow design, this fan not only ensures efficient air circulation but also adds an appealing look to your system. The RX140 PWM is ideal for use in front of radiators or behind mesh panels, making it an excellent choice for high-performance computer configurations. With a maximum speed of 1,600 RPM and a noise level of just 27.9 dB(A), this fan provides quiet yet effective cooling. The integrated RGB lighting in the frame offers customizable and attractive illumination that enhances the overall appearance of your system. Rubber pads at the corners minimize disruptive vibrations and contribute to a quiet operation. The Montech RX140 PWM is therefore the perfect solution for those who value both performance and aesthetics.
- Reversed airflow design for appealing installations
- Optimized for use in front of radiators or behind mesh
- Maximum airflow of 153.76 m³/h
- Rubber pads for vibration decoupling
- Integrated RGB lighting for individual customization.
8. Montech HP140 ARGB PWM 3 in 1 Pack White
The Montech HP140 ARGB PWM 3 in 1 Pack is a set of three high-quality 140 mm PWM fans designed for efficient cooling in PC cases. These fans feature customizable ARGB lighting that offers a variety of colors and effects to personalize the interior of the case. With a maximum speed of 1400 RPM, they ensure optimal airflow and cooling performance, while PWM operation allows for intelligent control of fan speed to minimize noise levels. The fans are elegantly designed in white, making them a stylish addition to any system. They are easy to install and provide reliable performance suitable for both gaming and work PCs.
- PWM technology for dynamic speed control
- ARGB lighting for customizable lighting effects
- Maximum speed of 1400 RPM for efficient cooling
- Easy installation and compatibility with common cases.
9. Montech Metal120 PWM fan - 120 mm, black
Black case fan with nine white rotor blades. PWM-controlled speed range from 800 to 1,950 RPM. Includes rubber vibration dampers. High airflow volume of 117.23 m³/h.
The Montech Metal120 PWM is a high-performance 120mm fan designed for use as a case fan. Nine rotor blades provide an airflow volume of 117.23 m³/h and a static pressure of 2.82 mmH2O. The fan is regulated via a PWM signal within a speed range of 800 to 1,950 revolutions per minute.
At maximum speed, the Montech Metal120 PWM produces a low noise level of 26 dB(A). The quiet and smooth bearing, along with the rubber vibration dampers, ensure that no vibrations are transmitted to the case. The fan package includes four screws for mounting to the case and eight rubber dampers.
Technical details:
Dimensions: 120 x 120 x 25 mm (W x H x D). Material: Plastic, rubber. Color: Black (frame), Black (fan blades). Noise level: 26 dB(A). Speed: 800 - 1,950 RPM (-10 /+5 %). Airflow volume: 117.23 m³/h. Air pressure: 2.82 mmH2O. Operating voltage: 12 V. Connectors: 4-pin PWM.
10. Montech HP140 ARGB PWM Black
Dazzling visuals: Enhance your gaming experience with ARGB lighting. 8 vibrant LEDs provide uniform lighting effects.
Airflow mastery: Strong and quiet cooling. Fan speed: 600 to 1600 RPM (±10%). Airflow: 95.61 CFM. Static pressure: 2.95 mm H20. Noise level: 29.2 dBA.
Long-lasting, reliable operation: Enjoy unmatched reliability with sturdy rifle bearings and advanced lubrication, reducing friction and heat for superior efficiency and lasting performance.
Transform your setup: Enjoy unmatched style and shine with the HP140 fans.
Flexible options: Choose between single pack or 3-in-1 for your cooling needs.
