Best Delock products in the SSD + Hard drive accessories category

On this page you'll find a ranking of the best Delock products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Delock Mounting set 31 pieces for M.2 SSD / module

Delock screws fixing set 31 pieces for M.2 SSD modules.

2. Delock 2.5″ Converter SATA 22 Pin > M.2 NGFF

Delock 2.5 inch converter SATA 22-pin > 1 x M.2 Key B - 7 mm. The Delock converter enables the connection of an M.2 SSD in 2280, 2260, 2242 and 2230 format and can be used as a replacement for a 2.5″ hard drive. The converter can be integrated into the system internally via the SATA 22 pin interface. 

3. Delock 64069

This converter from Delock allows for the installation of an M.2 PCIe NVMe SSD in 2280, 2260, and 2242 formats and can be connected to a PC or laptop via USB. Due to the USB-A connector and the direct installation of the SSD on the board without a case, the Delock converter can be excellently used as testing equipment. 

4. Delock HDD installation kit, 2.5" HDD in 3.5"

With this Delock mounting frame, you can install a 2.5-inch drive such as an HDD or SSD in an available 3.5-inch bay in your PC.

5. Delock Docking and cloning station 64098 for 5x 2.5 SATA HDD / SSD

This HDD/SSD docking station from Delock is designed for the external connection of up to four 2.5" SATA HDDs/SSDs via the USB interface, as well as for easy drive swapping through hot swapping. Additionally, it is possible to connect a single hard drive to the computer using the eSATA port. Up to five HDDs or SSDs can be used simultaneously, and access to them can occur at the same time. With the cloning function, the contents of an HDD/SSD can be copied to one or more drives without the need for a PC. Thanks to the USB connection and the included USB cable, the docking station can be easily connected to the computer. Furthermore, the included power supply ensures adequate power for the installed storage devices. 

6. Delock USB Type-C converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD with clone function

This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD in 2280, 2260, 2242, and 2230 formats, and a 2.5 or 3.5 SATA HDD or SSD via the USB interface.

Clone function without PC
The integrated clone function allows you to clone storage without the use of a PC. It is possible to clone from NVMe to SATA and SATA to NVMe.

Specifications
Connectors:
- 1 x USB 10 Gbps USB Type-C socket
- 1 x M.2 Key M slot
- 1 x SATA 6 Gb/s 22 pin socket
- 1 x DC power socket
Chipset: JMicron JMS581D
Supports M.2 modules in 2280, 2260, 2242, and 2230 formats with Key M or Key B+M on PCIe (NVMe) basis
Maximum height of the components on the module: 1.5 mm, use of double-sided modules possible
For 2.5 and 3.5 SATA HDDs/SSDs
Supports NVM Express (NVMe)
Supports S.M.A.R.T.
Supports TRIM
Supports Native Command Queuing (NCQ)
Data transfer rate up to 10 Gbps
Supports UASP
7 x LED display for power, access, and copy status
Bootable
Function keys:
- 1 x clone button
- 1 x on/off switch
- 1 x switch for clone mode
Dimensions (LxWxH): approx. 107 x 35 x 24 mm
Hot Plug, Plug & Play

Power supply specification
Plug-in power supply unit
Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
Output: 12 V / 3 A
Earth outside, plus inside
Dimensions:
- Inside: ø approx. 2.5 mm
- External: ø approx. 5.5 mm
- Length: approx. 10 mm

System requirements
- Android 11.0 or higher
- Chrome OS
- Linux kernel 5.15 or higher
- Mac OS 12.4 or higher
- Windows 10/10-64/11
- iPad Air (4th generation) or higher
- iPad Pro (3rd generation) or higher
- Surface Pro 7
- PC or notebook with a free USB Type-A port or
- Device with a free USB Type-C port or with a free Thunderbolt 3 or Thunderbolt 4 port

Package contents
- USB Type-C converter
- Cable USB-C plug to USB-C plug, length approx. 80 cm
- Cable USB-C plug to USB Type-A plug, length approx. 80 cm
- 3 x rubber nipples
- External power supply 12.0 V / 3.0 A
- Operating instructions. 

7. Delock Dual Dockingstation

This HDD docking station from Delock is designed for the external connection of two 2.5" or 3.5" SATA HDDs via the USB interface. With this solution, you do not need an external enclosure, as the HDD is directly inserted into the docking station. Additionally, the cloning function allows the contents of one hard drive to be copied to another hard drive without the use of a PC. 

8. Delock M.2 Key M to U.2 SFF-8639 NVMe adapter

This adapter from Delock can be used to connect a U.2 SSD directly to an M.2 slot, such as on a mainboard, in 2260 format.

Connectors: 1x 67 Pin M.2 Key M male, 1x U.2 SFF-8639 female, 1x SATA 15 Pin power male.
Interface: PCIe / NVMe.
Form factor: M.2 2260.
Compatible with PCI Express V4.0.
Bootable.
Supports NVM Express (NVMe).
Length without connectors: Data cable approximately 50 cm, power cable approximately 15 cm.

System requirements:
- Linux kernel 5.4 or higher
- Windows 8.1/8.1-64/10/10-64
- Windows Server 2016
- One free M.2 interface with Key M. 

9. Delock M.2 docking station for M.2 NVMe / SATA SSD with USB 10

This M.2 docking station from Delock allows the operation of an M.2 PCIe NVMe SSD or M.2 SATA SSD and can be connected to a PC or notebook via USB.

The major advantage of this Delock M.2 docking station is that both SATA and PCIe (NVMe) M.2 SSDs can be inserted into the docking station. The storage is automatically recognized by the chipset and can then be used.

The M.2 SSD is simply inserted into the slot and connected to the device via a USB-C connector. Therefore, the docking station can be excellently used as testing equipment.

Specifications:
- Connections:
- 1 x USB 10 Gbps USB Type-C connector
- 1 x M.2 Key M slot
- Chipset: Realtek RTL9210B
- Supports M.2 modules with Key M or Key B+M based on SATA or PCIe (NVMe)
- Supports NVM Express (NVMe)
- Bootable
- Data transfer rate of up to 10 Gbps
- LED indicators for power and access
- 1 x Power switch
- Cable length without connectors: approx. 15 cm
- Dimensions: Diameter approx. 60 mm, Height approx. 19 mm
- Hot Plug, Plug & Play

System requirements:
- Android 11.0 or higher
- Chrome OS
- Linux Kernel 5.15 or higher
- Mac OS 12.4 or higher
- Windows 10/10-64/11
- iPad Air (4th generation) or higher
- iPad Pro (3rd generation) or higher
- Device with a free USB Type-C port or with a free Thunderbolt 3 or Thunderbolt 4 port

Package contents:
- M.2 docking station
- User manual. 

10. Delock Protective bag for 2.5 SSD

This practical protective case from Delock not only impresses with its modern design but also offers space for SSDs, external enclosures, or hard drives up to 12 x 8 x 2 cm. Additionally, cables can be securely and space-savingly stored thanks to the inner mesh pocket.

Water-resistant and shockproof
The material of the case is water-resistant and protects the contents from light impacts due to its hard shell. The zipper allows for easy opening and closing.

Specifications
- Suitable for 2.5-inch SSDs, external enclosures, or hard drives up to 12 x 8 x 2 cm
- Material: Polyester
- Dimensions (LxWxH): approx. 14.5 x 10 x 3.5 cm
- Color: gray
- Water-resistant surface

Package contents
- Protective case for 2.5-inch devices. 

See all products