Best FeinTech products in the Switch box category
On this page you'll find a ranking of the best FeinTech products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. FeinTech Switch
Alternatively, analog stereo sound can be transmitted to headphones or active speakers, or digital 2.0/5.1 sound via SPDIF Toslink. The audio EDID can be manually changed using the audio mode switch. With the audio mode switch, you can set the audio format that the HDMI source provides, as long as the audio track is available. Please note that the same audio format applies to all outputs. Most TVs cannot process 7.1 audio and will remain silent. For HD audio, output via SPDIF or analog is not possible. HD audio formats such as Dolby TrueHD and DTS-HD can only be transmitted via HDMI. Through SPDIF Toslink, digital stereo (LPCM 2.0) or 5.1 audio (Dolby Digital / AC-3 or DTS) can be transmitted, depending on the source material. Digital audio formats do not have volume; this can only be controlled at the audio amplifier. Therefore, with SPDIF connection, you can only adjust the volume on the AV receiver or soundbar. With HDMI audio connection, indirect volume control is possible if the devices support HDMI-CEC. Switching between inputs occurs automatically (auto-switching) or manually via remote control or button. When you turn on a connected HDMI source, it automatically switches to that input. If you turn off the HDMI source, it switches back to the previously used HDMI input. Some devices do not turn off their HDMI output in standby mode, so the switch always receives a signal from an active device. To avoid this, you can disable the auto-switching function. ARC (Audio Return Channel) for outputting TV sound via the digital output is supported, but there is no output at the analog output.
2. FeinTech VSW14100 HDMI 2.1 Switch 4 In 1 Out | Auto-Switching
The VSW14100 is an HDMI switch that allows you to use four HDMI sources such as PS5, Xbox Series X, PC, Fire TV, or Apple TV on a single display. It supports 4K 120Hz, VRR, and HDR, including Dolby Vision. Input switching can be done via remote control, button, or automatically to the last active source. The automatic switching function can be disabled. The switch is powered by an included plug-in power supply. It supports HDCP 2.3 and all common audio formats. The maximum cable length is 3 m for 8K/4K 120Hz, 5 m for 4K 60Hz, and 10 m for 1080p.
3. FeinTech VMS02201 HDMI 2.0 Matrix Switch 2x2 mit Audio Extractor
The VMS02201 is a true 2x2 matrix switch for distributing 2 HDMI sources, such as a media player and a game console, to 2 displays, for example, a television and a video projector. With a built-in HDMI audio extractor, the switch also delivers audio to a sound system, either via SPDIF/Toslink in 5.1 Dolby Digital/DTS or analog in stereo through the headphone jack. The device supports ultra-HD resolutions up to 4K 60Hz with HDR10, HDR-HLG, and Dolby Vision, as well as HDCP 2.2 and all common audio formats. HDMI-CEC is supported on input 1. The VMS02201 offers EDID management (Copy-EDID function, 4K HDR 5.1 fixed or automatic) to prioritize the output format and can be controlled either directly on the switch or conveniently with the included infrared remote control. It allows you to display devices on both displays simultaneously or stream one to Display A and the other to Display B. The robust metal housing ensures long-lasting use. The dimensions of the device are 150 x 62 x 18 mm.
4. FeinTech SW212 HDMI 2.1 Switch 2 In 1 Out mit Audio Extractor (Toslink & Aux)
The SW212 is an HDMI 2.1 switch that allows two sources, such as game consoles, to be connected to a single display. Switching can be done either via a button or with the remote control. Automatic switching is possible and can be disabled. It features an HDMI 2.1 audio extractor that outputs sound additionally via Toslink (SPDIF) or 3.5 mm jack. Please note that only stereo, DTS, and Dolby Digital are available via Toslink, and stereo is available via the jack. The switch supports HDMI 2.1 features such as VRR, ALLM, QFT, and video resolutions up to 8K 60Hz or 4K 120Hz at 48 Gbps. HDCP 2.3 and all common audio formats are supported. HDMI-CEC is passed through. For stable signal transmission at 8K/4K 120Hz, a cable length of no more than 2 meters is recommended. The package includes a remote control, a power supply, and an EDID switch for format adjustment.
Switch box
−18%
EUR63,67 was EUR77,23
FeinTech SW212 HDMI 2.1 Switch 2 In 1 Out mit Audio Extractor (Toslink & Aux)
5. FeinTech SP210 HDMI 2.1 Splitter 1 In 2 Out | 4K 120Hz | Downscaler
The SP210 HDMI 2.1 Splitter distributes the signal from a source device to two displays simultaneously, without the need to switch between screens. It supports resolutions up to 8K at 60 Hz and 4K at 120 Hz, ensuring lossless video and audio transmission. For gaming, the splitter offers VRR and ALLM to reduce screen tearing and improve response times. Both displays receive the same signal unless different resolutions require the use of the downscaler, which adjusts the image accordingly. The splitter supports HDMI-CEC, allowing you to control the source device with your TV remote. The EDID management automatically adjusts the signal to match the capabilities of your displays, and the EDID switch enables manual optimization of the signal format.
6. FeinTech SW211 HDMI 2.1 8K Bi-Directional Switch 2 In 1 Out | Splitter 1 In 2 Out | Pigtail
The SW211 is a bi-directional HDMI switch that allows you to switch between two sources on one display or between two displays connected to one source. The "pigtail" version with an integrated HDMI cable (approximately 50 cm) makes connection particularly easy. Switching is done via a button, with only the selected display receiving the HDMI signal. An LED indicator shows the chosen connection (blue for connection 1, green for connection 2). Power is supplied through the HDMI signal, so a separate power supply is not required. The switch supports all HDMI 2.1 features such as 4K at 120 Hz, VRR, ALLM, 8K at 60 Hz, and many common audio formats, including Dolby Atmos and DTS-HD. It has a maximum data rate of 48 Gbps and supports a variety of video formats, including HDR and Dolby Vision. The SW211 is ideal for use with modern TVs, monitors, and projectors, but it is not suitable for HDMI-ARC or HDMI-eARC applications.
Switch box
EUR30,89
FeinTech SW211 HDMI 2.1 8K Bi-Directional Switch 2 In 1 Out | Splitter 1 In 2 Out | Pigtail
7. FeinTech VAX01202 HDMI eARC Audio Extractor & Splitter
The VAX01202 is a versatile audio extractor that offers two operating modes. In the eARC audio extractor mode, it transmits audio signals from the TV to a sound system via HDMI. It supports all modern audio formats such as Dolby Atmos and DTS-HD, while video formats and gaming continue to function seamlessly like a direct HDMI connection. In the HDMI audio splitter mode, the VAX01202 splits the signal from an HDMI source, allowing the sound system to receive only the audio signal (with a black screen) while the TV gets the full video signal. This mode also works with older AV receivers and does not require an HDMI-eARC/ARC connection. The VAX01202 supports video formats up to 4K 60Hz, HDR, Dolby Vision, and a data rate of 18 Gbit/s. Volume control via HDMI-CEC is possible if the sound system supports it. A USB power supply is required. It is important to note that the VAX01202 is not suitable for operation with HDMI-ARC on soundbars and requires an HDMI-eARC connection on the TV for the eARC function.
8. FeinTech SP410 HDMI 2.1 Splitter 1 In 4 Out | 4K 120Hz | Downscaler
The SP410 HDMI 2.1 Splitter distributes the signal from a source device to four displays simultaneously, without switching between screens. It supports resolutions up to 8K at 60 Hz and 4K at 120 Hz, providing lossless video and audio transmission. For gaming, the splitter ensures smooth gameplay and reduced latency with VRR and ALLM. All displays receive the same signal unless the resolutions vary; in that case, the downscaler adjusts the signal accordingly. With HDMI-CEC, you can control the source device using the TV remote. The EDID management automatically adjusts the signal to the displays, and the EDID switch allows for manual adjustment for the best audio and video experience.
9. FeinTech VSW12100 HDMI 2.1 Switch 2 In 1 Out | Auto-Switching
The VSW12100 is an HDMI switch that allows you to use two HDMI sources, such as a PS5 and Xbox Series X, on a single HDMI display. The switch supports 4K 120Hz, VRR, and HDR, including Dolby Vision. You can switch between sources either manually via a button or automatically to the last activated source. The switch requires a USB power source, although in some cases this may not be necessary. HDCP 2.3 is supported, as well as all common audio formats. Automatic switching does not work with all devices, such as Apple TV or Shield TV.
10. FeinTech Splitter
This HDMI 2.0 splitter distributes an HDMI signal up to Ultra HD resolution to 2 HDMI devices, such as TVs, monitors, projectors, or AV receivers. The splitter is backward compatible with lower resolutions at both the input and output. Through an integrated downscaler, 4K content can be displayed on a Full HD display. This allows for mixed operation of a 4K TV and a Full HD TV. An HDR signal remains HDR and may often not be processed correctly by the Full HD device. Therefore, when outputting both 4K and Full HD simultaneously, SDR should be set at the source. Additionally, the audio mode can be selected via a switch. This allows you to set the HDMI source to deliver the best possible audio format (Maximum) or an audio format that both connected HDMI devices support (Minimum). Please note that when connecting to an older AV receiver, it may not be able to process the HDR signals contained in the signal and may require an SDR signal.
