Best Sirui products in the Tripod category
On this page you'll find a ranking of the best Sirui products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Sirui T-1205 Allrounder Tripod Carbon with Head K-10II
SIRUI T-1205 + K10II Traveler - Travel Tripod/ Monopod Carbon with K-10II Ball Head SIRUI T-1205 + K-10II Tripod Your fully featured, portable travel companion Reversible folding legs Two centre columns Reversible centre column.ule Integrated monopod Rubber feet & metal tips Lightweight and portable The legs and centre column of the SIRUI T-1205 + K-10II tripod are made of carbon fibre to reduce weight and improve stability. Fold the legs up 180° for easy storage and transport. Two centre columns Both a long and a short centre column are included, for shooting from high angles and close to the ground. The short version has a minimum height of 250mm (25cm). The long centre column has an extendable maximum height of 1630mm (163cm). Rotate the centre column 180° for low angle or macro photography. Integrated monopod One leg can be removed and used as a monopod for very mobile situations. To do this, just remove one leg and attach the mounting plate to the top of the leg. The centre columns can also be attached to the monopod to increase height. The monopod has a minimum height of 385mm and a maximum height of 1600mm. Rubber feet & metal spikes The rubber feet and metal spikes ensure that the tripod is stable on any surface. Remove the rubber foot and replace it with a metal spike. Intuitive operation Hang a backpack on the lower hook to increase the stability of the tripod. Remove the bottom of the centre column to reveal an Allen key that locks the mounting plate securely so it does not rotate when the head is removed. A 1/4" screw hole is included for mounting a variety of accessories Non-slip foam grips protect your hands in cold weather K-10II Proffesional Ball Head There are multiple levels of friction control for the ball. Adjust the friction according to the weight of your equipment and once the friction control handle is tightened (turn counterclockwise), the camera will not tip over when the main handle is unlocked. Use the metal handle to adjust the friction of the ball. The base can be rotated continuously through 360° to take beautiful panoramic shots. The 90° notch is designed for vertical shots. In addition, there are rubber pads, a strap eyelet and a locking screw with D-ring Technical specifications SIRUI T-1205 + K-10II tripod Model: T-1205 Material: Carbon fibre Leg sections: 5 Tube diameter: 14.5 mm/0.57 inch - 26.5 mm/1.04 inch Min. height: 160 mm/6.30 inch Max. height: 1400 mm/55.12.12 inch Max. height: 1400 mm/55.12 inch Max. height Ext. Height Ext.: 1540mm/60.63 inch Retracted Height: 520 mm/20.47 inch Folded Height: 430 mm/16.93 inch Monopod Height: 385 mm/15.16 inch - 1600 mm/62.99 inch Weight: 1.2 kg/2.65 lb Max. Load: 10 kg/22.05 lb K-10II Ball Head Model: K-10II Diameter: 33 mm/1.3 inch Height: 96 mm/3.8 inch Weight: 0.39 kg/0.86 inch Max. load: 20 kg/44 lb Delivery 1x SIRUI T-1205 + K-10II tripod Load capacity: 10 kg Colour: Black Material: Aluminium Leg sections: 5 Monopod function: Yes Tripod height (max): 1400 mm Tripod height (min): 160 mm Tripod weight: 1.5 - 2.0 kg.
2. Sirui Traveler X-II Carbon travelling tripod AT-125 with quick release and KK E-10
Carbon tripod with E-10 ball head - ultra-light & super compact. This super-light, ultra-compact and comfortable tripod set has many features and refinements and should therefore not be missing on any tour.
The E-10 ball head works particularly precisely, smoothly and softly. With a load capacity of up to 8kg, it has a firm grip on your camera. The base can be rotated through 360°, ideal for panoramic shots. The safety lock system prevents the quick-release plate from accidentally slipping off.
The set weighs only 960g and is only 35.4cm long when packed up. This means it fits into almost any rucksack and is barely noticeable as a lightweight. The leg segments are released and extended with a twist, then just twist back briefly and the segments are fixed in place. It couldn't be quicker or easier.
The centre column can be split into a short centre column for ground-level shots or used the other way round. With the short centre column, you can achieve a minimum height of 12 cm, or almost 0 cm the other way round. The maximum height with the centre column extended is 154cm.
There are two 1/4" threads in the tripod shoulder for various accessories such as: Microphones, monitors, auxiliary arms etc. Also built into the shoulder is a levelling bubble for perfect alignment. For even more stability, a stabilising hook has been mounted at the lower end of the centre column. A rucksack, for example, can be hung from this.
The interchangeable plate is rubberised and Arca-Swiss compatible. The fastening screw has a D-ring. This means it can also be tightened by hand.
Tripod
EUR130,26
Sirui Traveler X-II Carbon travelling tripod AT-125 with quick release and KK E-10
Carbon, Metal
3. Sirui SH-25
Getting started in professional videography doesn't have to be expensive. Sirui has developed an inexpensive yet high-quality broadcast tripod especially for budding filmmakers. Lightness combined with stability are just two of the outstanding features of the Sirui SH-25 tripod. It comes with a video panhead and supports cameras weighing up to 10 kg. Double tube legs make the tripod extremely stable and therefore indispensable for professional video recordings. The centre spreader further increases stability. The spikes can be covered with rubber feet for employees working on sensitive floors. The large twist locks are particularly practical.
The video panhead has a 75 mm hemisphere and can be perfectly levelled on the tripod. With its long swivelling arm and adjustable friction, the camera can be guided intuitively and comfortably. The safety lock system prevents the camera plate from accidentally slipping out. If a DSLR is used instead of a video camera, for example, the sliding stoppers on the interchangeable plate provide additional safety.
4. Sirui ST-124 Superb Travel
The tripod from Sirui is specially designed for mirrorless system cameras and compact DSLR cameras. It is lightweight, compact and protected against water and dust. The designed lock mechanism allows for convenient operation. The tripod tubes are made of carbon. Another special feature is the triangular center column. This effectively prevents twisting and reduces vibrations. Of course, the column can be used in reverse, so you can also create shots close to the ground. The legs can be adjusted in three click stops, and each leg consists of four sections with three sealed ring locks. The rubber feet and twist-out metal spikes allow the tripod to stand securely on any surface. A stabilizing hook on the center column is standard, as is the included carrying bag.
Carbon tripods are usually a lot lighter than equivalent tripods made of aluminum. Especially if you are often on foot and have to carry a lot of other equipment - for example in nature photography - every gram saved is an advantage. However, carbon is not only lighter than aluminum, but also offers a higher load capacity and better stiffness values. This makes carbon tripods ideal for professionals as well as ambitious amateur photographers.
5. Sirui ET-2204 Easy Traveler
The technical data of the ET series tripods are based on the TX series. However, they have flip-locks instead of ring-locks and are equipped with a ball head at the factory.
The tripods combine extremely low weight with very compact design. They are easy to handle in any situation and always provide a secure hold for your camera.
The legs of the ET-2204 can be swivelled up 180° so that the tripod is only 43cm high when folded. The head can remain on the tripod. Each leg consists of 4 sections with 3 practical flip-locks. The rubber feet with the metal spikes that can be turned out allow the tripod to stand securely on any surface.
A stabilisation hook on the centre column is part of the Sirui standard, as are cold protection handles and a transport bag. The bag strap can also be used as a tripod strap.
The Sirui E-bead heads work particularly precisely, smoothly and softly. The base surface can be rotated through 360°, ideal for panoramic shots. The friction can be adjusted by releasing the locking knob. The Safety Lock System prevents the quick-release plate from accidentally slipping off. The clamping device for the interchangeable plate is compatible with the Arca-Swiss system and allows the use of various plates.
6. Sirui Tripod R-2214X
Sirui Tripod Tripod R-2214X.
7. Sirui Tripod A-1205 Y-11
Anyone looking for a compact all-round tripod will be happy with the SIRUI A-1205. With its powerful Y-11 ball head, removable monopod and telescopic center column, this small tripod offers everything a photographer needs. Whether in the bustling big city, exploring exciting landscapes or in the studio at home, the A-1205 is always at your side. And with its small packing size, it fits easily into any photo bag. The S-Grade design with its ergonomically curved legs offers the user a comfortable handling. The arched shape also allows for a better distribution of the load on the individual legs and thus greater stability. The tripod shoulders are also made of a non-slip magnesium alloy. This ensures excellent shock absorption and improved stability. The leg of the SIRUI A-1205 can be removed and used as a standalone monopod. This feature turns the A-1205 into a 2in1 tripod that lets you handle any situation. If that is not enough, the monopod can even be extended with the centre column.
Despite its compact size, the A-1205 tripod reaches a proud working height of 148.8 cm (with head). The secret lies in its telescopic center column with double extension. This provides additional height. If you prefer it low, you can also mount the centre column upside down. Your camera has never been closer to the ground. With its non-slip rubber feet, the A-1205 stands securely on any surface. For more stability the load hook on the center column can be loaded with e.g. a backpack. The 5 leg sections can be released and locked in no time at all using the ring locks. Thanks to the soft sponge rubber grips you always have your tripod safely under control. In winter they also serve as protection against the cold. The tried and tested 180° flip-over function of the legs also makes this SIRUI tripod a real packing miracle. The A-1205 measures just 37cm when packed. The ball head Y-11 is completely enclosed. The ball head Y-11 carries cameras with a weight of up to 8kg. It is equipped with the Safety Lock System to prevent the removable plate from accidentally slipping off. It also has a leveling bubble and a 360° panorama scale. It is compatible with the Arca Swiss System.
8. Sirui ET-1204+E-10
The ET series tripods are based on the TX series in terms of technical specifications. However, they have flip locks instead of ring locks and are already equipped with a ball head at the factory. The tripods combine extremely low weight with a very compact design. They are easy to handle in any situation and always provide a secure hold for your camera.
The legs of the ET-1204 can be swiveled upwards by 180°, so that the tripod is just 42cm high when folded. The head can remain on the tripod. Each leg consists of 4 sections with 3 convenient flip locks. The rubber feet allow the tripod to stand securely on any surface.
A stabilizing hook on the center column is also part of the Sirui standard, as well as cold protection handles and a carrying bag. The bag strap can also be used as a tripod strap. The e-ball heads from Sirui work particularly accurately, smoothly and softly. The base can be rotated 360°, ideal for panoramic shots.
The friction can be regulated by loosening the locking knob. The Safety Lock System prevents accidental slipping of the quick-release plate. The clamping device for the interchangeable plate is compatible with the Arca-Swiss system and allows the use of various plates.
9. Sirui Traveler 5CX with ball head B-00K
The ultra lightweight SIRUI Traveler 5CX carbon-tripod combines low weight with very high quality.
Despite its compact construction, it ensures secure support for your DSLR, mirrorless or compact camera.
With the weight of only 895g, it's hardly noticeable in your luggage and becomes an excellent companion on all your travels.
The legs can be folded up by 180°, meaning that the tripod can be collapsed to a height of just 31 cm.
Each leg is made of 5 sections with 4 sealed twist locks.
The rubber feet ensure the tripod is steady on all surfaces.
The Sirui Traveler 5CX carbon-tripod features a removable center column.
The ballhead can also be mounted directly onto the tripod shoulder for maximum stability.
A practical, supplied carrying case and grip friendly, insulated wraps on two legs for use in cold weather is a standard with Sirui tripods.
10. Sirui SVS75+SVH15 Rapid System Kit
Sirui Video Tripod Rapid System Set SVS75 Tripod + SVH-15 Head. The SVS75 Rapid System video tripod with single-stage height adjustment and the 75 mm half-shell quick-release handle has 6 patents and is the most user-friendly professional tripod set for high-quality video productions. This professional tripod is characterised by high speed and durability. It weighs only 4.1kg (without head), includes a 75mm half-shell quick-release handle, a mid-level spreader and horseshoe feet for better stability. Compared to conventional tripods with knob or folding leg locks, the SIRUI SVS75 has a one-step height adjustment, which means you only need to pull a twist lock on each leg to set up and lock the tripod. Even with heavy equipment, this single-stage height adjustment design allows for quick and flexible height adjustment up and down, which is suitable for quick shots on the move. The diameter of each leg is 36 mm. In addition, the carbon fibre construction reduces weight while increasing stability. The maximum load capacity is approx. 25 kg, allowing even heavy equipment to be carried and filmed for longer periods of time. Mid-Level Spreader The mid-level spreader can be added to stabilise the entire support system. You can extend or retract the length of the spreader to fine-tune the angle of the legs via locking knobs. Turn the central knob and lift the spreader to store it together with the stand. Fixed angle and stepless adjustment Remove the centre spreader and lock the legs in one of the three positions (21° / 50° / 78°) using the semi-automatic knob.
