Yes, the lamp has two ropes with snap hooks for attaching to the base plate. Installation begins with mounting the base plate. The lamp can then be attached to the base plate using one or both wire ropes. The cables are then inserted into a clamp that is closed with a cover, which also serves as a strain relief. The clamp can be fixed to the base plate to prevent the cables from blocking the latching mechanism. This mechanism takes some getting used to at first, but provides a firm hold. With this model, it should be noted that the screw holes are in line with the cable outlet. This could cause problems, as the lamp is usually mounted parallel to the walls and the cables are often also laid parallel to the walls under plaster. Therefore, one of the two possible directions of rotation parallel to the walls could be blocked. If an additional cable runs at right angles to connect a second light switch, this could mean that the lamp cannot be aligned correctly. It is therefore advisable to check whether the routing of the cables allows proper suspension before installation.

No, it's all screwed.