Best Leatt products in the Bike protective gear category

On this page you'll find a ranking of the best Leatt products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Leatt 3DF AirFit Body Protector

The 3DF AirFit Body Protector offers a slim, lightweight fit that protects the chest, back, elbows and shoulders. 3DF AirFit Impact Foam is made of a special materialthat is soft and flexible and adapts to the body through the body heat. In the event of an impact, however, the material hardens immediately and thus offers maximum protection. It fits your body perfectly because the multi-layer foam consists of a sandwich lay-up that allows movement between the layers for easier bending and better comfort. - Size information: normal size - fit: normal cut - protection zones: Upper arm - Protector type: Soft-hard-combination - Weight: 1450 g - Details: - Perfect fit due to elastic straps between chest and back protector - Excellent ventilation due to 3DF AirFit Impact... 

2. Leatt AirFlex Pro

Safe zones: Knee; Scope of delivery (quantity): in pairs; Size information: Size is normal; Fit: tight fit; Details: Super-thin 6mm impact tested knee protector;Armourgel: Energy absorbing material; Additional pads on the sides and thighs for better protection; MoistureCool Wicking Material provides cooling; Silicone lamination prevents slipping; Good fit and high wearing comfort through 3D design; Tested according to: EN1621-1; Weight: approx. 300g / pair. 

3. Leatt 3DF 6.0

The Leatt 3DF 6.0 Knee Guard combines the best of two worlds: Inside is a soft 3DF protector that adapts to the anatomy of the body, but hardens on impact and absorbsthe impact energy. The hard shell on the outside ensures that the protector does not slip off the knee in the event of a fall and the impact energy is unconverted into kinetic energy. Measurement - Weight: 530 g Fit & Cut - Size information: size is normal - Fit: close-fitting cut Main information - Protective zones: Knee - Protector type: soft-hard combination - Scope of delivery (quantity): Pairwise Details - Details: - 3DF AirFit ventilated absorption foam - EN1621-1 certified - Odor-resistant MoistureCool and AirMesh materials - Pre-shaped 3D design for an optimal fit - Lateral impact protection. 

Leatt 3DF 6.0 (S, M, Elbow protectors, Pair)
Bike protective gear
–29%
only 1 piece on sale
62,27 EUR was 87,96 EUR

Leatt 3DF 6.0

S, M, Elbow protectors, Pair

4. Leatt Body Tee 3DF AirFit Lite Evo

All new for 2024 is the Softshell Body Tee 3DF AirFit Lite Evo, which offers CE-certified level 1 impact protection for the chest, back and shoulders, as well asfoam padding on the sides.

We've increased the impact area on the chest, used additional mesh to improve airflow in critical areas, and updated the BraceOn system by designing slimmer, more effective straps for the shoulders.

Made from soft, flexible and ventilated 3DF AirFit impact foam that moulds to the body shape for a comfortable fit, along with a MoistureCool Flatlock sewn compression body sock that works with or without the Leatt Neck Brace.

Has a Leatt protection rating of 13 out of 25, the next step up in protection level is the Body Protector 3DF AirFit Lite Evo which offers elbow impact protection.

Features:

* Overall Leatt® protection score of 13.
* 3DF AirFit ventilated soft impact foam
* CE tested and certified for impact protection:
Chest EN1621-3 Level 1
Back EN1621-2 Level 1
Shoulder EN1621-1 Level 1
* New one size fits all, 3D design ensures a comfortable, great fit
* New, slimmer BraceOn™ system for neck brace adjustment.
* Easy to wear compression sock with zip for maximum evaporation
* Full length back protector
* Padded flanks
* Odour-resistant MoistureCool and AirMesh fabrics.
* Easy to clean:
Hand wash
* FFM - French Motorcycle Federation certified
* Sizes: - 160-196cm - 5ft3"-6ft 5"
S - M - L - XL - XXL
* Plastic free packaging.
 

5. Leatt 3DF AirFit Hybrid

The Body Protector 3DF Airfit Hybrid has the flexibility and comfort of our Soft-Shell 3DF Body Protector with the added benefit of a hard shell coating to increaserepellency.

It offers CE impact protection in the chest, back, shoulder and elbow areas as well as a foam side protector.

The 3D design and easy-to-wear compression sock with zip ensure good air circulation, sweat evaporation and a perfect fit that works with or without the Leatt Neck Brace.

Has a Leatt Protection Score of 23 out of 25, next step for a higher level of protection is the 5.5 or 6.5 Body Protectors, both of which have kidney belts.
 

6. Leatt DBX 3.0 3DF Impact Shorts

An all-round protection offers the newly developed Impact Shorts DBX 3.0 3DF from Leatt. The integrated 3DF material ensures reliable protection for the hip andthigh. In a fall, it hardens immediately and distributes the impact energy evenly, reducing the risk of serious injury. For high wearing comfort provides the preformed 3D design, the flat seams and the quick-drying MoistureCool fabric. The Impact Shorts DBX 3.0 is CE certified and meets the 1621-1 safety standard. - Fit: close-fitting cut - Protection zones: Hip - Protector type: soft - Carrier material: 55% polyurethane 17% EVA 14% nylon 11% polyester 3% other fibers - Scope of delivery (quantity): single - Details: - CE certified impact protection for thighs and hips (EN1621-2 Level 1) - 3DF material distributes impact energy and hardens immediately - Wide, comfortable waistband - Flat seams for high wearing comfort - Made of MoistureCool and AirMesh fabric - Quick drying, ventilated, anti-bacterial - Ergonomic pre-shaped 3D design for excellent fit - Size information: size runs normal. 

7. Leatt 3DF 4.0

The integrated 3DF material offers reliable protection for hips and thighs. In the event of a fall, it hardens immediately and distributes the impact energy evenly,thus reducing the risk of serious injury. The preformed 3D design, flat seams and dual-density seat padding ensure a high level of comfort. The Impact Shorts 3DF 4.0 is CE-certified and meets the 1621-1 safety standard. Scope of delivery (quantity): single Base material: 53% Polyurethane 15% EVA 14% Nylon 15% Polyester 3% other fibres Size information: Size falls out normally Fit: tight fit Details: 3DF material distributes impact energy and hardens immediately; Dual-Density seat padding; Made of MoistureCool and AirMesh fabric; Wide, comfortable waistband; Flat seams for high wearing comfort; Quick drying, ventilated, anti-bacterial; CE-certified impact protection for thigh and hip (EN1621-2 Level 1); Ergonomically pre-shaped 3D design for excellent fit; Protective zones Hip; Protector type: Soft. 

8. Leatt RaceVest vest

- Waterproof softshell material

- 10.000mm/10.000g/m2 waterproof and breathable material

- Dirt and water repellent coating of the fabric

- 3 front pockets
and one large pocket on the back

- Fits with and without body protectors

- Reflective print on the back

\n

Sizes: S-2XL.
 

9. Leatt Knee/Shin Guards Dual Axis Cactus

- Hard shell and 3DF impact padding with ventilation

- Anatomically correct design, left and right rotation for optimal freedom of movement.

- Narrow shin guards
that also fit into boots

- Protective elements with optimal ventilation

- Impact protection for knee and shin: CE-tested and certified EN1621-1

- Leatt® overall protection value 25 points

- Weight: 850g (1.87lbs) pair.
 

10. Leatt Knee & Shin Guard Dual Axis Pro

HARDSHELL, GEAR DRIVEN VENTILATED IMPACT PROTECTOR

Brand new for 2024 is the Dual-Axis Pro knee and shin protector, this is a step between the Dual Axis knee and
shin protector and our Z-Frame knee brace.

The Dual Axis Pro has a gear-driven movement and is anatomically correct, meaning it mimics the natural movement of the knee.

Leatt's proprietary technology for kneecap protection means it is CE approved and certified as impact protection, there is a tough hardshell exteriorside with soft inner padding that offers great comfort and rubberised patches on the inside offer improved grip on the bike, while large vents help to keep you cool.

This Dual Axis Pro hardshell is a great addition to the knee protection line.
Has a Leatt protection rating of 25 out of 25, the next step up in protection would be the Z-Frame knee brace.

Features:

* Overall Leatt® protection score of 25.
* Hard shell with impact technology developed by Leatt.
* Anatomically correct, interlocking pivot design for the left and right sides ensures perfect knee movement
* CE tested and certified for impact protection:
Knee and Shin EN1621-1
* Extended, soft inner padding provides comfort and support
* Metal outer shell reinforces the gear mechanism and helps reduce lateral impact forces
* Rubberised inner hinge padding provides more grip on the wheel
* Narrow shin plate for a good fit of the shoe
* Large vents in critical areas for maximum airflow
* Sizes:
S/M - L/XL - XXL
* Plastic-free packaging.