EUR793,90
SoFlow SO4 Pro
20 km/h, 40 km, 500 W
Question about SoFlow SO4 Pro
Hello all, I have the Soflow S04 Pro with a defective rear light. I think you have to unscrew a lot of things to remove the rear light. Can anyone tell me how/what you have to unscrew to replace the rear light. Thanks in advance.
Helpful answer
Hey,
loosen the two covers on the left and right where the cat's eye is attached (2x Allen key each).
Then loosen the Allen screws on the rear mudguard (6 this time).
Now you have to fix the thin cable of the rear light somewhere on the right side with a cable tie (otherwise it will slip into the housing).
Then disconnect the cable.
When all this is done, you can remove the rear light from the mudguard with a 10 mm nut.
The cable is glued into the cable guide in the mudguard with hot glue.
You must somehow fumble the cable through the small hole. (If you can't -> just loosen the motor with the 2 large silver nuts).
The last step is to reassemble everything backwards.
loosen the two covers on the left and right where the cat's eye is attached (2x Allen key each).
Then loosen the Allen screws on the rear mudguard (6 this time).
Now you have to fix the thin cable of the rear light somewhere on the right side with a cable tie (otherwise it will slip into the housing).
Then disconnect the cable.
When all this is done, you can remove the rear light from the mudguard with a 10 mm nut.
The cable is glued into the cable guide in the mudguard with hot glue.
You must somehow fumble the cable through the small hole. (If you can't -> just loosen the motor with the 2 large silver nuts).
The last step is to reassemble everything backwards.
No idea!!!