DCN662D2 Cordless Finishing Nailer: The DCN662 nailer is equipped with a brushless DC motor from the BLDC series. The working range is 32–64 mm and features a trigger as well as a contact lock to prevent accidental firing. The tool-free lock allows for the removal of jammed nails, reducing downtime. It has a micro nose for precise placement of the fastener at the desired location. This machine can be used for a variety of finishing tasks on wood and wood-like materials. This nail is also referred to as a brad due to the type of nails used, similar to dowels. The depth of the fastener can be easily adjusted without tools using the depth adjustment knob. Additionally, it features an error indicator (low battery or jammed nail). The foot pin has two strong diodes to illuminate the work area and a work mode switch to drive nails individually or in a sequence of 4 nails. The brad nailer has a clear advantage over gas or pneumatic devices – primarily lower operating costs, as there is no need to purchase gas cartridges or carry a compressor. This version comes with two 2.0 Ah batteries and a charger, packaged in a TStak VI system case. DeWalt DCN662D2 Nailer: 1 x DCN662 Nailer, 2 x Li-Ion 2.0 Ah DCB183 Batteries, 1 x Charger with reversible belt hook, TStak VI System Case. DCN662 Nailer Specifications: Supply Voltage: 18 V, Battery Type: Li-Ion, Supported Batteries: 3.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah / 12.0 Ah, Nail Diameter: 1.6 (16Ga) mm, Nail Length: 32-64 mm, Nail Angle: 0º, Magazine Capacity: 110 pcs., Magazine Loading: from the bottom, Operating Mode: Contact and Sequential, Dimensions (Length x Width x Height): 310 x 95 x 325 mm, Weight: 2.4 kg.