System 3000 Motion Detector Attachment 1.10 m Comfort BT in pure white satin finish.

• Automatic switching of lighting based on heat movement and ambient brightness.
• Operates with System 3000 switch, dimmer, or secondary unit 3-wire.
• Extends the detection range in combination with the secondary unit 3-wire.
• When connecting a System 3000 secondary unit with a control attachment or mechanical switch to the main unit, the lighting can be turned on or dimmed for the duration of the run-on time.
• Manual switching between automatic, permanent on, and permanent off is possible on the device.

With System 3000 switch:

• Short-term operation.

With System 3000 dimmer:

• Turns on with the last set brightness or saved switch-on brightness.
• The switch-on brightness can only be permanently saved via the System 3000 secondary unit with control attachment.
• Basic lighting function.
• Night light function.

Functions with Gira System 3000 App:

• Set the brightness threshold.
• Sensitivity of both sensors can be individually adjusted (0, 25, 50, 75, 100%).
• Set the run-on time.
• Forced functions: automatic operation, permanent on/off, time-limited on/off for 0.5 to 5 hours.
• Presence simulation.
• Switch-off pre-warning.
• Day operation.
• Test mode.
• Timer function.
• Alarm function.

The detection field is horizontally aligned and may not have a limit when used outdoors. Therefore, pay attention to the suitability of the installation location in outdoor areas or install the motion detector attachment at a height of 2.20 m. A snap-on cover to restrict the detection area is included in the delivery.