Switch/Shutter Actuator 8/4-fold KNX easy, 16A, C-load. The switch/shutter actuator REG allows for the switching of an independent load per actuator channel or the control of a shutter drive using two actuator channels. A mixed operation of drive and switching functions is possible. The device is a rail-mounted unit with an integrated bus coupler, QuickConnect terminal blocks for auxiliary voltage, KNX bus connection, load/switch connections, and a labeling field.

There is a manual control button for each output with a status LED (single-surface operation), as well as a toggle switch for auto/manual and a backlit programming button.

Functions: Control options for the switching channels for on/off, timer function with switch-off pre-warning, and forced control with respective status indication. The automatic function can be enabled/disabled, and a load shedding through channel shutdown with the highest priority is possible. There are 64 scene functions adjustable per channel.

The roller shutter/shutter function allows for up/down operation with slat angle adjustment, positioning function, and slat adjustment for blinds in percentage parameterization. Status objects for the slat position in percentage and the upper/lower end position are also available. Forced control with status indication and three alarm objects with different priority controls are integrated.

There are 64 scene functions per channel and an adjustable sun protection function available. Note: The device can be programmed using the easy commissioning tool, easy configuration server, or ETS (from version 4). Please observe the instructions from the roller shutter/blind motor manufacturers.