Meter cabinet, univers Z, 1100 x 1050 x 205 mm, protection class II, 336 mounting units. Cabinet housing according to DIN VDE 0603/1, dimensional standard DIN 43 870 for surface-mounted, flush-mounted, or partially recessed installation. Designed for the construction of a meter distribution system up to 355 A, rated voltage 230/400 V 50 Hz. Protection class IP31 (IP44/IP54 according to DIN VDE 0470/1), protection class II insulated, protection class IP3X behind the door. Composed of a cabinet with a door made of powder-coated, baked-on, sturdy profiled 1 mm thick steel sheet. Interior lining completely made of plastic. Cable entries at the top and bottom through built-in plastic flange plates, rear pre-forming in the plastic part and side-mounted plastic flange plates in the area of the NAR (suitable for busbar entry), RfZ (only with a height of 1100 mm), and AAR. Door flush with the front with internal adjustable hinges, optionally hinged on the right or left with a 110° opening angle. Door lock with a latch, from a width of 800 mm and for all cabinets from a height of 1250 mm with a rod lock featuring a three-point locking system. Door lock interchangeable with other locking systems. Cabinets can be flanged side by side and stacked on top of each other. Cabinet size from 1 to 5 fields with 72 to 540 mounting units (PLE). Note: Always use a connection set (accessory) for cabinet-to-cabinet connections. In the AAR area, the plastic flange plate can be removed, and optionally a SCHUKO socket or a CEE socket can be installed.