Note: This item will be delivered via freight directly from the manufacturer. Please make sure to provide us with a phone number for the freight service. Furthermore, this item can only be shipped within Germany.

Application area: Emergency ladder systems are structural installations that allow self-rescue for individuals capable of doing so in case of danger or enable the rescue of others. Regardless of the climbing height, it is important to note that climbing protection is not permissible as fall protection. When planning emergency ladder systems, especially the access safety measures, the responsible fire protection authority must be involved. Proof of the load-bearing capacity of the ground must be verified and approved by a qualified expert for structural stability for each construction project. At unsecured exit points, railings must be installed on both sides of the ladder or directed towards the exit point. The gap at the exit must not exceed 75 mm. For potential fall heights starting from 1 m, holding devices are required at entry, exit, and crossover points. For lateral crossovers, the ladder sections must be raised higher.

Starting dimensions: Distance from the entry level to the first rung 100 – 400 mm; the top rung must be flush with the entry level. The gap measurements between the ladder system and the railing must not exceed 120 mm. Trigger mechanism: Emergency descent ladder operated via foot control lever or safety barrier. A vertically movable ladder section is only permitted at the lowest ladder segment. This extendable ladder section must automatically lower itself before being stepped on. In the lowered state, the rungs of the extended ladder section and the lowest ladder segment must be at the same height. Access platforms must cover the entire access opening (e.g., window width) as access options for emergency ladder systems. The vertical overlap of consecutive ladder runs must be at least 1 m.