The automatic water distributor (irrigation valve) from Gardena does not have an integrated pump. It works mechanically and does not require a power supply, batteries or a pump to automatically control the irrigation of up to six garden areas. A water source with sufficient pressure is required for operation, for example a tap or a separate garden pump, which is not integrated in the device. The device only controls the distribution of water to different irrigation zones, but requires an external water supply.

Yes, that's no problem, I do the same

Is the same product.

No, the distributor has max. 6 outputs and min. 2. The water flow switches this over every time. I.e. when the water flow is interrupted, it switches to the next number. That is why the computer needs it!

According our informations it can be programmed by the Gardena Master.

This automatic water distributor, can only be used with our two watering computers, articles: Gardena C1060 plus and Gardena C1060 solar + special programme 15. The computers are operated with a 9V alkaline battery or rechargeable battery. The water distributor switches one output after the other purely mechanically. If water pressure is present, one output is open. If the water supply is closed, it is switched to the next output by spring force. The inlet pressure must be at least 1 bar and a minimum of 20 litres per hour must flow through. With the article: Gardena C2030 duo plus the special programme 15 for the water distributor is not available and the two outlets can only be controlled a maximum of 3 times each per day. For this reason, the water distributor cannot be used with the C 2030 duo plus.