The motion detector with switch 10 A detects moving heat sources (e.g., people) and can switch on resistive, inductive, or capacitive loads for an adjustable period. It is suitable for installation in a 60 mm flush-mounted box and features screw terminals. Without claws, for screw mounting.

Functions:

• Automatic operation: Automatically switches on consumers when motion is detected and depending on ambient brightness (default setting).
• Manual operation: Switches on consumers at the device, regardless of ambient brightness, operates with a secondary switch (mechanical button/other motion detectors).
• Detection brightness: 5-500 Lux (factory setting 50 Lux).
• Delay time: 1 second - 30 minutes (factory setting 5 minutes).
• Test mode: Checks motion detection and installation.
• Secondary operation: Sends a switching command to a primary device when motion is detected.

Technical specifications:

• Rated voltage: AC 230 V, 50 Hz
• Rated current: max. 10 AX, cos 0.6
• Outputs: 1x normally open contact
• Max. switching power per channel: LED: 200 W, incandescent lamps 2200 W, HV halogen lamps 2000 W, NV halogen lamps with magnetic transformer 500 VA, electronic transformers: 1050 VA, energy-saving lamps: 200 W, motor load: 1000 VA
• Neutral wire: required (3-wire system)
• Protection: 16 A circuit breaker
• Cable area: max. 2x2.5 mm², 0.5 Nm
• Secondary switch: single button, unlimited number, max. 50 m
• Detection range: 160 degrees
• Range: approx. 8 m
• Control elements: 1 button
• Display elements: 1 LED (behind the lens).