Pellet press with PTO shaft - 400 kg/h - 15 to 28 hp - Ø 230 mmThe powerful pellet machine with PTO shaft optimises your pellet productionYou feed or fertilise with pellets? With the pellet press from Wiesenfield, you can produce up to 400 kg of feed sticks per hour. Or you can process up to 180 kg of wood chips per hour. The individual pieces of raw material should be smaller than 6 mm. The pellet press is driven by a PTO shaft via the power take-off of a tractor or other utility vehicle with an output of between 15 and 28 hp. Thanks to a continuous operating time of 24 hours, you can easily produce even large quantities of pellets. The operating element is clearly laid out and intuitive. An easily accessible emergency stop switch ensures safety - as does the protective grille in the large feed hopper.simple & effective. The pellet machine from WiesenfieldWhether wood pellets or feed pellets, with the pellet machine you can press different materials into practical sticks. How does it work? You heat the pellet press to 60 - 80 °C. Two solid rollers then press the raw material through a 230 mm diameter die. The result: firmly pressed, durable pellets with a diameter of 6 mm. If you want to produce pellets with a different diameter, you will need different moulds. Use the practical ejection chute to fill the finished pellets directly into bags: You can use the built-in moulds and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. The pellet press produces large quantities of pellets with a diameter of 6 mm for feeding, fertilising or heating very high productivity - with an operating time of 24 h, the pellet press produces up to 400 kg/h of feed stick or up to 180 kg/h of wood pellets powerful drive - the pellet press is driven by a PTO shaft via a tractor's power take-off (PTO)The pellet press is operated via the power take-off of a tractor (15 - 28 hp recommended) long-lasting results - thanks to heating to 60 - 80 °C, you can achieve a longer pellet shelf life with the pellet press simple design - the compact feed press is characterised by a large hopper, stable feet and a compact design.