Best selling Floor heating from Devi
Here you’ll find the best products from Devi in the Floor heating category. The ranking is based on the best-selling products from this brand within the category. In addition to sales volume, factors such as availability, pricing, and overall customer relevance also influence the order. For each product, we include a short description and the most important highlights from customer reviews, giving you a quick overview of the most popular Devi options. This page always stays fresh and updates automatically.
1. Devi Thin-bed set 300 W, 2.0qm 140F1652 with WLAN thermostat
Danfoss Thin Bed Set 300W 140F1652
Manufacturer: Danfoss
Designation: Thin Bed Set 300W
Type: 140F1652
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-300 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 2 m²
Length: 4000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Danfoss Thin Bed Set 300W 140F1652: additional details
Thin bed set with Wi-Fi thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and has been specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor temperature system is particularly suitable for retrofitting in irregular and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated temperature limit: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.0 m².
2. Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
Devi Thin Bed Heating Mat 140F0447
Manufacturer: Devi
Description: Thin Bed Heating Mat 150 W/m²
Type: 140F0447
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0-300 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 2 m²
Length: 4000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
Additional details:
The thin bed heating mat comes with a connection cable and a suitable sensor protection tube DN10 with a red cap. The self-adhesive thin bed heating mat is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in angular and/or large rooms, as the return of the second connection is not necessary. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating output: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10 % / -5 %, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.0 m².
Floor heating
EUR234,–
Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
3. Devi Dünnbett-Heizmatten Set
Thin-bed set with touch thermostat, flexible sensor protection pipe DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin-bed heating mat with a connection cable is ready to install and has been specially developed for installation in levelling compound or flexible adhesive directly underneath the floor covering. Thanks to its low installation height of just 3.2 mm, it is ideal for renovating and modernising bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for retrofitting in angled and/or large rooms, as there is no need to run back the second connection. The heating cable with additional protective braiding for use of the residual current circuit breaker is attached to a plastic net. The length of the connecting cables is 4.0 m. PTC thermistor: 1 x 4m, 1.0 mm², voltage: 230 V, nominal limit temperature: 120 °C, specific heat output: 150 W/m², linear load: 11 W, insulation: PVDF / FEP, resistance tolerance: +10% / -5%, minimum installation temperature: 5 °C, smallest bending radius: 6 x dA, calculation width: 50 cm, delivery width: 48 cm, mat height: 3.2 mm, protection rating: IPX7, approval: EN 60335-2-96, area: 6.0 m², 0.5 x 12.0 m.
4. Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
Devi Thin Bed Set 1-1050 W 140F0825
Manufacturer: Devi
Description: Thin bed set 1-1050 W DTIF 7.0 sqm, professional
Type: 140F0825
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0..1050 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 7 m²
Length: 14000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
The Devi Thin Bed Set 1-1050 W 140F0825 includes a thin bed set with a touch thermostat, a flexible sensor protection tube DN10 with a red cap, plastic nails, and installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled and specifically designed for installation in leveling compounds or flexible adhesives directly beneath the floor covering.
With a low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large spaces, as the return of the second connection is not required.
The heating cable, with additional protective sheathing for the use of RCD protection, is applied to a plastic mesh. The length of the connection leads is 4.0 m.
Cold lead: 1 x 4m, 1.0 mm²
Voltage: 230 V
Rated limit temperature: 120 °C
Specific heating power: 150 W/m²
Length load: 11 W
Insulation: PVDF / FEP
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5 °C
Minimum bending radius: 6 x dA
Calculation width: 50 cm
Delivery width: 48 cm
Mat height: 3.2 mm
Protection class: IPX7
Approval: EN 60335-2-96
Area: 7.0 m²
0.5 x 14.0 m
EAN: 5703466216590.
Floor heating
EUR771,47
Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
5. Devi 89-846010
The Devi heating cable 89-846010 is a powerful solution for heating surfaces that require reliable heat distribution. With a heating capacity of 1250 watts and a length of 40 meters, this product is ideal for installation in gutters to minimize the risk of ice formation. The heating cable is made with a robust design and offers an IPX7 protection rating, meaning it is protected against water ingress. These features make the Devi heating cable a practical choice for various applications where a constant temperature is required. Installation is straightforward, and the heating cable can be used in different environments to ensure an efficient heat source.
- Heating capacity of 1250 watts for effective heat distribution
- IPX7 protection rating for high water resistance
- Suitable for installation in gutters to prevent ice formation.
6. Devi Thin-bed heating mat set 140F0820 1-450 W professional DTIF 3,0qm 50x60
Devi Thin Bed Set 1-450 W 140F0820
Manufacturer: Devi
Description: Thin bed set 1-450 W DTIF 3.0 sqm, professional
Type: 140F0820
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-450 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 3 m²
Length: 6000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details: Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and designed specifically for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to the low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable with additional protective sheath for use with RCD protection is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 3.0 m², 0.5 x 6.0 m.
7. Devi Comfort thin-bed heating mats
Devi Thin Bed Heating Mat Set 140F1706
Manufacturer: Devi
Description: Thin Bed Heating Mat Set 0.5 x 8.0
Type: 140F1706
Design: Heating cable with carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection power: 0-600 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 4 m²
Length: 8000 mm
Width: 500 mm
Thickness: 4 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: no
Additional details:
Thin bed set with Opti clock thermostat, flexible sensor protection tube DN10, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and designed specifically for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 4 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 2.3 m. Cold lead: 1 x 2.3 m, 2 x 1.0 mm², Voltage: 230 V, Rated limit temperature: 90 °C, Specific heating output: 150 W/m², Length load: 11 W, Insulation: lead-free PVC / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 4 mm, Protection class: IPX7, Approval: IEC 60335-2-96, Area: 1.0 m², 0.5 x 8.0 m.
8. Devi Heating mat
Danfoss Heating Mat DTCE-150 1040W
Manufacturer: Danfoss
Designation: Heating mat 230V
Type: DTCE-150 1040W
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: no
Connection power: 1040 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold leads: 1
Length of cold lead: 6000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 6.9 m²
Length: 9200 mm
Width: 750 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
Danfoss Heating Mat DTCE-150 1040W: additional details
Heating mat with a connection cable suitable for installation in or under the screed. Can be used in dry, damp, or wet rooms. Features additional protective sheathing for use with RCD protection. This heating mat system is particularly suitable for installation in awkward and/or large areas, as the return of the second connection is eliminated. Includes factory-installed waterproof connectors and a 6 m long cold lead, heating cable according to IEC 60800, voltage: 230 V, rated limit temperature: 80°C, specific heating output: 150 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, outer diameter: 7 mm, minimum bending radius: 5 x dA, protection class: IP X7, area 6.9 m², 0.75 x 9.2 m.
9. Devi Outdoor heating cable 30W/m 230V 14m sw 89846002
The Devi Freifläche heating cable is an efficient solution for heating outdoor areas. With a heating power of 30 watts per meter and a total length of 14 meters, this product is ideal for installation in gutters and other exterior spaces to prevent frost and ice formation. The IPX7 protection rating ensures that the heating cable is protected against water ingress, making it a reliable choice for outdoor use. The heating cable is designed in a simple black color, allowing it to blend unobtrusively into the surroundings. The connection cable is 14 meters long, providing flexible installation options. This product is made in Poland and offers a combination of functionality and durability.
- Heating power of 30 watts per meter for effective heating
- IPX7 protection rating for optimal water protection
- Suitable for installation in gutters
- Long connection cable of 14 meters for flexible applications.
10. Devi Thermal insulation 13mm moulded parts 140F1131
Danfoss System Plates 140F1131
Manufacturer: Danfoss
Designation: System Plates
Packaging Unit: 2 m², 4 plates
Type: 140F1131
Application: Other
Design: Other
Thickness: 13 mm
Danfoss System Plates 140F1131: Additional Details
System plates designed to accommodate heating cables for installation under laminate and wooden floors. The system is an electric heating system for tempering laminate and wooden floor coverings in drywall construction. To determine the number of system plates needed, the total area must be calculated, taking into account the necessary waste amount. The result should be rounded up or down to whole m². The required length of heating cable is determined by multiplying the heated area by a factor of 10. A mounting kit is required for each thermostat to position the floor sensor. Not suitable for damp rooms, bathrooms, etc.
Packaging unit consists of 2 m² of system plates, width: 500 mm, length: 1000 mm, thickness: 13 mm, U-value: 3.0 W/m²K, impact sound insulation: 3 dB, heating cable length per m²: 10.0 m, maximum permissible heating output: 100 W/m².
Product order
See all products