Best Eurotec products in the Garden flooring category
On this page you'll find a ranking of the best Eurotec products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Eurotec Joint spacer
Plastic spacers in black. For uniform joint width when laying floorboards. 4 different foot sizes selectable for each cross due to varying leg thicknesses: 4, 5, 6, and 8 mm.
2. Eurotec Dista-Leiste 2.0
The Dista skirting board 2.0 is ideally suited for the visible fixing of decking. It acts as a spacer and allows freedom of movement between the panel and the substructure. At the same time, it promotes air circulation under the decking, resulting in less rotting.
Product benefits:
- Promotes air circulation under the decking
- Creates a movement clearance of 7 mm between the substructure and decking boards
- Reduces the risk of sheared fixing screws due to swelling and shrinkage of the decking boards
- Less rotting
Hardwoods and tropical woods should always be pre-drilled. The Dista skirting board 2.0 is fastened and fixed with decking screws Ø4 mm in the holes provided. Screws are not included in the scope of delivery; 5 screws are required for one Dista skirting board 2.0.
Note: The Dista moulding is made of hard plastic and is designed to prevent the stainless steel screws from shearing off. Shearing is caused by the swelling and shrinking of the wood, known as working. The working is particularly pronounced in the transverse direction of the planks. The wood "wants" to take the screw with it, while the lower part of the screw is still firmly seated in the substructure. As hardwood and tropical wood is very hard due to its high density, the screw has no chance of pressing into the wood when it is working. If the screw breaks off under this load, this is known as shearing. The Dista strip 2.0 was developed to prevent stainless steel screws from shearing off. It creates a movement space of 7 mm between the substructure and the decking board, allowing the stainless steel screws to move with it.
Dimension (mm): 30x700x7
Material: Hard plastic
Content (ST): 50.
3. Eurotec Underpacking pads
The Eurotec support pads are an essential accessory for terrace construction. Made from high-quality EPDM special rubber, these pads provide an effective solution for creating a stable and protective gap between the substructure and the ground. They are designed to compensate for small unevenness in the soil and distribute the load evenly, resulting in improved stability for the entire structure. Additionally, the pads contribute to height leveling of the substructure and offer effective impact sound insulation, enhancing the comfort and durability of the terrace. With a compact size of 60 x 60 mm and a height of 6 mm, these pads are easy to handle and ideal for various outdoor applications.
- Protection of the support beams through distance from the ground
- Compensation for small unevenness in the soil
- Even load distribution for increased stability
- Impact sound insulation and height leveling properties.
4. Eurotec Bottom part
For adjustable foot 86.039.11, to enlarge the support surface of the adjustable foot, the lower part can be clicked onto the adjustable foot. The installation height increases by only 2 mm.
5. Eurotec Terrace underlay
The Eurotec terrace underlay is a high-quality solution for terrace construction, specifically designed to inhibit the growth of plants beneath the terrace. Made from diffusion-permeable polypropylene, this underlay provides an effective barrier against unwanted vegetation while ensuring controlled water permeability. With a length of 10 meters and a width of 1.6 meters, it is ideal for various terrace projects. The use of plastic material ensures high durability and resilience, making the underlay a practical choice for gardening and landscaping. This underlay is not only functional but also contributes to the maintenance and preservation of the terrace structure by minimizing moisture accumulation and root growth beneath the terrace.
- Diffusion-permeable for optimal air circulation
- Limited water permeability to control moisture
- Inhibition of plant growth beneath the terrace.
6. Eurotec Terrace glider StarterClip
The StarterClip terrace slider from Eurotec is a practical accessory for terrace construction, made from high-quality hard plastic. This product offers a flexible solution for the installation of terrace boards, especially in situations where conventional starter or end sliders cannot be used. The StarterClip enables easy and secure fastening, even when installation cannot be done from the side, such as against a house wall or a wall. With screws included in the package, the StarterClip is ready to use immediately and provides reliable support for your terrace construction. The use of robust plastic ensures a long lifespan and resistance to weather conditions, making it an ideal choice for outdoor use.
- Made from durable hard plastic
- Easy installation with included screws
- Ideal for applications where side fastening is not possible.
7. Eurotec Terrace glider start / end glider
The Eurotec terrace glider start/end glider is an essential accessory for terrace construction. Made from high-quality hard plastic, this glider provides a durable and robust solution for finishing terrace boards. It allows for a clean and unobtrusive transition, contributing to an aesthetically pleasing overall appearance of the terrace. The glider comes with screws that ensure easy and secure installation. With a package of 10 pieces, it is ideal for various outdoor projects. The use of hard plastic ensures that the glider is weather-resistant and low-maintenance, making it a practical choice for any garden or outdoor area.
- Made from durable hard plastic
- Includes screws for easy installation
- Provides a clean and unobtrusive finish.
8. Eurotec Decking glides PA6.6 19x110x190mm
Decking glides for invisible fastening of decking boards. Use the decking start and end glides or the StarterClip for the first or last support timber and for board joints. Includes 4 Thermofix screws (stainless steel, hardened) per glider. Note: Distance between support timbers is 600 mm, board width is 145 mm, joint dimension is 5 mm.
9. Eurotec Adjustable feet
The adjustable feet from Eurotec are a practical solution for terrace construction. They are made from high-quality hard plastic and offer a load capacity of up to 2.2 kN, making them ideal for supporting terrace coverings. These feet are height-adjustable, allowing for flexible adaptation to different substrates. They are particularly useful for creating a stable and even base for terrace structures. With a width of 150 mm and a length of 60 mm, they are compact yet robust enough to withstand outdoor conditions. The use of hard plastic ensures durability and weather resistance, making maintenance and care of the terrace easier.
- Height-adjustable for flexible adjustments
- Load capacity of up to 2.2 kN
- Made from durable hard plastic.
10. Eurotec Decking glide screws A4 4.2 x 24mm
