Best Kidde products in the Hazard detectors category
On this page you'll find a ranking of the best Kidde products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Kidde Carbon monoxide detector X10-D.2
With a penetrating volume of 85 dB (A) and an optical signal in the form of LEDs, the X10-D.2 alerts you to increased concentrations of carbon monoxide. Green light indicates operational readiness, red light indicates an alarm state, and yellow light indicates a malfunction. The alarm itself is regulated according to EN 50291:2010 and is tiered based on the level of carbon monoxide concentration in the air: Concentration of 50 ppm (0.005%): 60 to 90 minutes until alarm activation, concentration of 100 ppm (0.01%): 10 to 40 minutes until alarm activation, concentration of 300 ppm (0.03%): less than 3 minutes until alarm activation.
2. Kidde Czujnik tlenku węgla 2030-DSCR
Additional information: Laminated chipboard is resistant to mechanical stress and extreme temperatures. This is self-assembly furniture. Edges are finished with ABS plastic, which is characterized by high mechanical and chemical resistance. Clean the furniture surface with a soft cloth and avoid using harsh chemicals. The photos of the sets show an example arrangement with other furniture from the collection. The remaining models are available for sale separately.
Frame finish type: Matt
Frame material: Particle board
Product colour: Oak Anthracite
Frame finish material: Laminate
Number of shelves: 5 shelves
Shelves material: Particle board
Distance between shelves: 33 cm
Width: 600 mm
Depth: 300 mm.
3. Kidde 10Y29A Smoke detector
Best suited as a general smoke detector. With the silence button, you can turn off the operation, for example, while grilling steaks, and the alarm will reactivate automatically after about 10 minutes. Smoke detectors should always be placed on the ceiling, as centrally as possible in the room. For safety, the best option is to get an optical smoke detector and a carbon monoxide detector if there is a fireplace or a gas stove in the premises.
4. Kidde Czujnik czadu z wyświetlaczem K7DCO
The K7DCO carbon monoxide detector from Kidde offers a reliable solution for monitoring indoor air quality. Equipped with an acoustic and visual warning signal, it provides timely alerts about dangerous carbon monoxide levels. The LED display allows for easy reading of the current status information. The detector is battery-operated, making it flexible in placement, whether on a wall or a table. With a sound power level of 85 decibels, it ensures that warnings are heard even in loud environments. The K7DCO is an essential safety device for households that prioritize a high standard of protection.
- Acoustic and visual warning signal for enhanced safety
- Battery-powered for flexible installation
- LED display for easy status monitoring
- Master-slave function for expanded installation options.
5. Kidde KID-29HD-UK - Power supply unit
The Kidde KID-29HD-UK is a state-of-the-art smoke detector that ensures reliable monitoring of indoor spaces through its optical detection technology. Equipped with wireless transmission technology, it allows for flexible installation without the need for complicated wiring. The smoke detector is powered by a long-lasting 9-volt battery. With a compact design and a weight of only 102 grams, the KID-29HD-UK is easy to handle and install. It provides a clear alarm signal of 85 decibels, which quickly draws attention in case of an emergency. Additionally, the detector is compatible with smart home systems, enabling integration into existing security solutions. The KID-29HD-UK is therefore an ideal choice for those who value safety and user-friendliness.
- Optical detector for precise smoke monitoring
- Wireless transmission technology for easy installation
- Powered by a 9-volt battery for reliable energy supply
- 85 dB alarm signal for effective warning
- Compatible with smart home systems for enhanced security solutions.
6. Kidde carbon monoxide detector K5CO
K5CO Carbon Monoxide Sensor, equipped with an electrochemical sensor from Kidde, which guarantees a lifespan of 10 years. The battery power supply allows for optimal placement of the detector in the room and provides protection even during a power outage. Exceeding the permissible CO levels is indicated visually (red LED) and audibly (loud, pulsating alarm sound at a strength of 85 dB). The device's memory stores information about the detection of a CO concentration that exceeds 100 PPM. This allows the user to ensure that no carbon monoxide is emitted in the room during their absence. The sensor features a test/reset button that lets you check the device's operation and reset the alarm signal. The efficiency control system continuously monitors the sensor, internal circuits, and battery condition. In case of a malfunction or low battery, the yellow LED blinks and an audible warning signal sounds. Additionally, the sensor is equipped with a function that allows you to quickly verify the correct response of the sensor to the CO test gas. Thanks to a specially designed housing, the sensor can be placed not only on the wall but also on a flat surface, such as a nightstand next to the bed. After 10 years from the activation of the power supply, the sensor will remind you to replace the device. The K5CO is marked with the construction sign B, confirming compliance with the Polish standard PN-EN 50291-1: 2018 + AC 2021 for carbon monoxide detectors at home. The research was conducted by the Science and Research Center for Fire Safety of the National Research Institute. Additionally, it has a BSI certificate confirming compliance with the requirements of BS EN 50291-1: 2018, issued by the British Standards Institution.
7. Kidde Czujnik czadu z wyświetlaczem K10LLDCO
The K10LLDCO carbon monoxide detector from Kidde is a reliable safety device designed to warn against the dangers of carbon monoxide. This device is intended for indoor use and provides both acoustic and visual warning signals to ensure you are alerted to potential dangers in a timely manner. The detector is battery-operated, allowing for easy installation without wiring, making it a flexible solution for various living environments. With a compact design and weighing just 132 grams, the detector can be easily mounted in different locations. The high alarm volume of 85 decibels ensures that you are alerted even in noisy environments. The K10LLDCO is therefore an important addition to any home to ensure the safety of its occupants.
- Acoustic and visual warning signals for comprehensive safety
- Battery-operated, wireless installation for flexible mounting
- High sound output level of 85 decibels for effective alerting
- Compact dimensions for easy integration into various living spaces.
8. Kidde DAAF 10Y29 smoke detector Photoelectrical reflection Wireless
The DAAF 10Y29 smoke detector from Kidde is a reliable safety device equipped with photoelectric reflection technology. This wireless smoke detector offers an effective way to detect potential fire hazards indoors. With an optical warning signal and a sound power level of 85 decibels, it ensures that you are alerted in a timely manner in the event of a fire. The smoke detector is battery-operated and does not require a smart home hub, making installation and use easy. Weighing only 128 grams and featuring compact dimensions, it is simple to mount and seamlessly integrates into any living environment. The wireless range of 3 meters allows for flexible placement, while compatibility with smart home systems offers additional functionalities.
- Optical warning signal for clear alerts
- Battery-powered for easy installation
- Compatible with smart home systems
- Sound power level of 85 decibels for effective warning
- Wireless connection for flexible placement.
9. Kidde 2030-DSR
The 2030-DSR smoke detector is a reliable safety device designed for indoor use. It provides an effective way to alert you early to smoke development, minimizing potential dangers. With an optical warning signal and a sound output level of 85 decibels, this smoke detector ensures that you are quickly alerted in case of an emergency. It operates wirelessly, allowing for flexible wall mounting. The smoke detector is powered by a 9V battery, which is included, and offers a wireless range of up to 3 meters. The housing made of robust ABS plastic ensures durability and reliability.
- Optical warning signal for clear alerts
- Wireless installation for flexible mounting
- Includes 9V battery for immediate use
- Sturdy ABS housing for increased durability.
10. Kidde Dualny czujnik dymu i tlenku węgla K10SCO
The Dual Smoke and Carbon Monoxide Detector K10SCO is a reliable carbon monoxide alarm designed for indoor use. This device provides an effective way to detect dangerous accumulations of carbon monoxide and sound an alarm in a timely manner. With an acoustic warning signal of 85 decibels, the detector ensures that you and your surroundings are quickly informed in case of danger. The K10SCO is wireless and powered by two AA batteries, allowing for easy installation and flexibility in placement. The optical warning signal offers an additional visual confirmation of the alarm. With a modern design made of durable ABS plastic, the detector seamlessly integrates into any indoor environment while ensuring high functionality.
- Optical warning signal for visual alerting
- Acoustic warning signal with 85 decibels volume
- Wireless operation for flexible installation
- Powered by two AA batteries for easy maintenance.
