Measuring line
Quantity discount
EUR14,08 per piece for 2 units
Voltcraft Highly flexible measuring leads MSB-300 30 V/AC, 60 V/DC 10 A
Best selling Measuring lines from Voltcraft
On this page you'll find a ranking of the best Voltcraft products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Voltcraft Highly flexible measuring leads MSB-300 30 V/AC, 60 V/DC 10 A
The Voltcraft measuring lead MSB-300 is optimized for electrical connections and low-voltage measurements in laboratories and workshops. The rated current is 10 A and the rated voltage is 30 V AC (alternating current) and 60 V DC (direct current). Extremely flexible: The cable material used is of exceptionally flexible quality. Unlike cheaper and stiffer materials, tangling is nearly impossible here. Increased tensile strength: Particularly tear-resistant plastic fibers enhance the tensile strength and extend the lifespan. Heat resistant: The measuring lead is insulated with silicone and is resistant to heat damage that can occur when working with hot soldering irons. For your safety: The measuring lead is double insulated in two colors. If the first insulation layer is damaged, a differently colored insulation layer becomes visible. This wear indicator reliably shows when the cable is worn out. For safety reasons, damaged measuring leads should be replaced immediately. Secure contact: The hard-nickel surface coating of the 4 mm lamella connectors allows for a high number of plug cycles.
2. Voltcraft Hochflexible security blade
The Voltcraft safety measuring lead MSB-501 is optimized for electrical connections and measurements in laboratories and crafts. The rated current is 10 A, and the rated voltage is 1000 V AC (alternating current) and 1000 V DC (direct current). According to CAT IV, the rated voltage is 600 V AC and 1000 V DC.
Extremely flexible: The cable material used is of exceptionally flexible quality. Unlike cheaper and stiffer materials, tangling with the Voltcraft MSB-501 is nearly impossible.
Increased tensile strength: Particularly tear-resistant plastic fibers enhance tensile strength and extend the lifespan.
Heat resistant: The measuring lead is insulated with silicone and is insensitive to heat damage that can occur when working with hot soldering irons.
For your safety: The measuring lead is double insulated in two colors. If the first insulation layer is damaged, a white insulation layer is revealed. This wear indicator reliably shows when the cable is worn out. For safety reasons, damaged measuring leads should be replaced immediately.
Secure contact: The hard-nickel surface coating of the 4 mm safety lamella plugs allows for a high number of mating cycles.
3. Voltcraft Highly flexible measuring leads MSB-300 30 V/AC, 60 V/DC 10 A
The Voltcraft MSB-300 measuring lead is optimized for electrical connections and low-voltage measurements in laboratories and workshops. The rated current is 10 A and the rated voltage is 30 V AC (alternating current) and 60 V DC (direct current). Extremely flexible: The cable material used is of exceptionally flexible quality. Unlike cheaper and stiffer materials, tangling is nearly impossible here. Increased tensile strength: Particularly tear-resistant plastic fibers enhance the tensile strength and extend the lifespan. Heat resistant: The measuring lead is insulated with silicone and is insensitive to heat damage that can occur when working with hot soldering irons. For your safety: The measuring lead is double insulated in two colors. If the first insulation layer is damaged, a differently colored insulation layer becomes visible. This wear indicator reliably shows when the cable is worn out. For safety reasons, damaged measuring leads should be replaced immediately. Secure contact: The hard-nickel surface coating of the 4 mm lamella connectors allows for a high number of plug cycles.
Measuring line
Quantity discount
EUR7,59 per piece for 2 units
Voltcraft Highly flexible measuring leads MSB-300 30 V/AC, 60 V/DC 10 A
4. Voltcraft Alligator clip connector 4 mm CAT III 1000 V, CAT IV 600 V Black, Red MSK-104
The Voltcraft MSK-104 safety crocodile clip is a reliable solution for connecting to multimeters and other measuring devices. These clips allow for safe and easy contact with the elements being measured, keeping your hands free for other tasks. With a rated voltage of up to 1000 volts (CAT III) and 600 volts (CAT IV), they are suitable for a variety of applications. The clips are made from high-quality copper, providing a robust connection that is essential for precise measurements. The package includes two crocodile clips in black and red, allowing for clear differentiation of connections. These clips are not only functional but also manufactured in Germany, ensuring additional quality and reliability.
- Suitable for multimeters and other measuring devices
- Rated voltage up to 1000 V (CAT III) and 600 V (CAT IV)
- Made from high-quality copper for reliable connections
- Package includes: 2 crocodile clips in black and red.
Measuring line
Quantity discount
EUR7,67 per piece for 2 units
Voltcraft Alligator clip connector 4 mm CAT III 1000 V, CAT IV 600 V Black, Red MSK-104
5. Voltcraft Highly flexible test leads MSB-501 1000 V, 600 V 10 A
The Voltcraft safety measuring lead MSB-501 is optimized for electrical connections and measurements in laboratories and crafts. The rated current is 10 A, and the rated voltage is 1000 V AC (alternating current) and 1000 V DC (direct current). According to CAT IV, the rated voltage is 600 V AC and 1000 V DC.
Extremely flexible: The cable material used is of exceptionally flexible quality. Unlike cheaper and stiffer materials, tangling with the Voltcraft MSB-501 is nearly impossible.
Increased tensile strength: Particularly tear-resistant plastic fibers enhance tensile strength and extend the lifespan.
Heat resistant: The measuring lead is insulated with silicone and is resistant to heat damage that can occur when working with hot soldering irons.
For your safety: The measuring lead is double insulated in two colors. If the first insulation layer is damaged, a white insulation layer becomes visible. This wear indicator reliably shows when the cable is worn out. For safety reasons, damaged measuring leads should be replaced immediately.
Secure contact: The hard-nickel surface coating of the 4 mm safety lamella plugs allows for a high number of plug cycles.
Measuring line
Quantity discount
EUR9,30 per piece for 2 units
Voltcraft Highly flexible test leads MSB-501 1000 V, 600 V 10 A
6. Voltcraft BNC test lead with crocodile clips
Perfect for connecting to all devices with a BNC connector. Elements to be measured can be contacted easily and safely, leaving your hands free for other tasks.
Measuring line
Quantity discount
EUR8,47 per piece for 2 units
Voltcraft BNC test lead with crocodile clips
7. Voltcraft MEASURING LINE MSB200
The VOLTCRAFT measuring cable MSB-200 is suitable for development boards, digital and analog signals, as well as specific measurement tasks. The rated current is 2.2 A and the rated voltage is 30 V AC (alternating current) and 60 V DC (direct current).
Extremely flexible
The cable material used is of exceptionally flexible quality. Unlike cheaper and stiffer materials, tangling is nearly impossible here.
Increased tensile strength
Particularly tear-resistant plastic fibers enhance tensile strength and extend the lifespan.
Heat resistant
The measuring cable is insulated with silicone and is resistant to heat damage that can occur when working with hot soldering irons.
For your safety
The measuring cable is double insulated in two colors. If the first insulation layer is damaged, a differently colored insulation layer becomes visible. This wear indicator reliably shows when the cable is worn out. For safety reasons, damaged measuring cables should be replaced immediately.
Secure contact
The hard-nickel surface coating of the 2 mm lamella connectors allows for a high number of mating cycles.
8. Voltcraft Measuring lead 1.14m with tweezers
The Voltcraft measuring lead, with a length of 1.14 m, is a versatile tool specifically designed for precise measurement and handling of SMD components. Equipped with a 4 mm plug, it allows for easy connection to various measuring devices. The insulated tweezers, which can open up to 10 mm, ensure safe handling of sensitive components. This measuring lead is not only functional but also made from durable PVC material, ensuring its longevity and reliability under various conditions. The combination of the measuring lead and tweezers makes this product an essential tool for professionals and hobbyists in electronics.
- Insulated tweezers for safe handling of SMD components
- Suitable for nominal voltages up to 60 volts
- Made from durable PVC material.
Measuring line
Quantity discount
EUR12,58 per piece for 2 units
Voltcraft Measuring lead 1.14m with tweezers
9. Voltcraft sal measuring cable set
The Voltcraft Universal Measuring Cable Set is a versatile solution for various measurement applications. It offers a combination of BNC connectors and different test clips, allowing for flexible connections to various devices. With a cable length of 0.80 m, it is ideal for use in laboratories, workshops, or educational settings. The robust construction and high-quality materials ensure reliable performance and durability. This set is particularly useful for technicians and engineers who need to perform precise measurements. The various connection options make it an indispensable tool for any technical setup.
- BNC connector to 2 IC test probes
- BNC connector to 4 mm banana plugs
- BNC connector to alligator clips
- Impedance of 50 Ω for precise measurements.
10. Voltcraft Trip measuring lead for insulation measuring device ET-200
The measuring lead allows for the initiation of the insulation measurement at the ET-200 directly at the test tip. The measuring device no longer needs to be held in hand. The user can fully concentrate on the measurement.
