1. Plid Anti Mould Paint Interior 5l, White - Anti-mould paint for damp rooms

The anti-mold paint from Plid is a specially developed interior paint that effectively combats mold growth in damp areas. Made in Germany, this paint provides reliable protection by preventing mold spores from settling. Its high opacity and easy application make it ideal for renovation and new painting projects in poorly ventilated spaces, such as bathrooms, toilets, and basements. It can be applied to various surfaces, including interior plaster, concrete, and drywall, with a suitable primer required depending on the substrate. The paint has a matte finish and covers up to 30 square meters per coat. It can be repainted after 6 hours, allowing for quick and efficient application.

- Mold-resistant properties to prevent mold growth
- High opacity for an even finish
- Suitable for various substrates such as concrete and drywall
- Easy to apply with standard tools
- Quick drying time: can be repainted after 6 hours. more

Paint

EUR51,05 EUR10,21/1l

Plid Anti Mould Paint Interior 5l, White - Anti-mould paint for damp rooms

White, 5 l

2. Plid Allgrund White 2.5L + paint set / Rust protection paint Rust primer Primer

The Plid Allgrund Weiss Primer is a versatile product manufactured in Germany, known for its multifunctional properties. This rust protection paint is ideal for renovating and redesigning old metal surfaces. It not only provides active rust protection but also creates a highly opaque base that is perfect for subsequent processing with synthetic resin paints. The primer is suitable for both indoor and outdoor use and can be applied to various substrates such as steel, galvanized steel, zinc, aluminum, and hard PVC. The application is straightforward, as the product is ready to use and can be applied with both brush and roller. However, compatibility should be checked before overcoating with other materials.

- Active rust protection for old metal surfaces
- Highly opaque for a perfect base
- Suitable for various substrates, including aluminum and plastics
- Ready to use for brushing and rolling
- Can be overcoated after just 2 hours. more

Paint

EUR49,74 EUR19,90/1l

Plid Allgrund White 2.5L + paint set / Rust protection paint Rust primer Primer

White, 2.50 l

3. Plid Insulating paint 2.25L white for approx. 6m² /basement paint nicotine paint opaque white wall paint

The LH insulating paint from Plid is a highly effective, cement-based wall paint specifically designed for the insulation of stubborn stains and moisture. This paint is ideal for basement areas where water stains and moisture are common issues, as well as for heavily smoked rooms where conventional water-based insulating paints are insufficient. The application of this paint is straightforward and requires only basic tools. The insulating paint provides a long-lasting solution by effectively isolating water, nicotine, and soot stains, and preventing salt efflorescence on mineral substrates such as concrete, lime and cement plaster, and brick. For best results, application should occur at temperatures above +8 °C, and the substrate must be load-bearing and free from separating agents. This paint is not suitable for gypsum-containing surfaces and should be well stirred before use.

- Highly efficient cement-based insulating paint for the permanent insulation of water, nicotine, and soot stains
- Suitable for mineral substrates such as concrete, lime and cement plaster, and brick
- Prevents salt efflorescence and protects masonry from further moisture damage
- Application at temperatures above +8 °C and good ventilation during drying required
- High opacity and repaintable after 8 hours. more

Paint

EUR65,33 EUR29,04/1l

Plid Insulating paint 2.25L white for approx. 6m² /basement paint nicotine paint opaque white wall paint

White, 2.25 l

4. Plid Magnetic paint 2.25L anthracite grey for approx. 4m²/ magnet Paint magnetic paint magnetic wall

The brand magnetic paint from plid is made in Germany. The magnetic paint from plid is versatile, whether in the office, kitchen or children's room, the design possibilities are almost limitless. The magnetic paint comes in a modern anthracite grey shade, but can also be painted over with any commercially available emulsion paint. Another major advantage of this magnetic paint is that it adheres to many surfaces such as doors, furniture, concrete, wood, metal and hard plastic surfaces.

Substrate pre-treatment:
Not suitable in areas with permanent exposure to moisture! The substrate must be sound, clean and dry. Observe VOB, Part C, DIN 18363, the relevant BFS data sheets and the latest version of the technical data sheet! Before applying the coating, test the suitability of the material/substrate by applying a test coat. If in doubt, request specialist advice! In the case of heavily soiled substrates, pre-clean the substrate with a suitable cleaner and rinse thoroughly with clean water. Dust binding cloths must not be used! Alternatively, we recommend degreasing and dusting the substrate with a mixture of methylated spirits and clear water (1:1) using a lint-free cloth before applying the material!

Application:
The material is ready to use. Do not mix with other materials.

Application method:
Brush or roller applicationApply at an air and substrate temperature of at least +7 °C (ideal range 10 - 25 °C). Stir well before use and apply evenly with a brush or paint roller. If still desired, add max. 5 % water.

Drying (at 20 °C and 65 % relative humidity):
Dust-dry after approx. 1 hour. Can be painted over after approx. 6 - 8 hours.
-Completely dry after approx. 24 hours. Avoid mechanical stress on the surfaces and spray water during this time.
Lower temperatures and higher humidity extend the drying time.

Cleaning the tools:
Clean tools with water immediately after use.

These technical instructions are for your information only and are based on our research and experience. They may be changed by us without prior notice to reflect the latest state of the art. A guarantee
cannot be given due to the various influences during application and processing. In case of doubt, please contact our technical application department. more

Paint

EUR89,13 EUR39,61/1l

Plid Magnetic paint 2.25L anthracite grey for approx. 4m²/ magnet Paint magnetic paint magnetic wall

Anthracite grey, 2.25 l

5. Plid Interior paint set 5L white matt for approx. 30m² / wall paint ceiling paint house paint

The interior paint from Plid is a high-quality wall paint specifically designed for indoor use. With a volume of 5 liters, this set is suitable for renovation and new painting projects in various indoor spaces. The paint is characterized by its high opacity and easy application, making it ideal for different surfaces such as plaster, concrete, masonry, as well as paper and textured wallpapers. The matte finish creates a pleasant room climate and a harmonious atmosphere. The interior paint is ready to use and can be applied undiluted, which simplifies the application process. Additionally, it can be tinted with full and tinting colors to allow for personalized color designs. The paint can be recoated after a drying time of about 8 hours, providing flexibility in designing living spaces.

- High opacity and easy application
- Suitable for various surfaces such as plaster and concrete
- Matte finish for a harmonious room climate
- Ready to use and can be applied undiluted
- Tintable with full and tinting colors. more

Paint

EUR53,43 EUR10,69/1l

Plid Interior paint set 5L white matt for approx. 30m² / wall paint ceiling paint house paint

White, 5 l

6. Plid Magnetic paint 0.75L anthracite grey for approx. 4m² + paint set/magnetic paint magnetic board

The brand magnetic paint from plid is made in Germany. The magnetic paint from plid is versatile, whether in the office, kitchen or children's room, the design possibilities are almost limitless. The magnetic paint comes in a modern anthracite grey shade, but can also be painted over with any commercially available emulsion paint. Another major advantage of this magnetic paint is that it adheres to many surfaces such as doors, furniture, concrete, wood, metal and hard plastic surfaces.

Substrate pre-treatment:
Not suitable in areas with permanent exposure to moisture! The substrate must be sound, clean and dry. Observe VOB, Part C, DIN 18363, the relevant BFS data sheets and the latest version of the technical data sheet! Before applying the coating, test the suitability of the material/substrate by applying a test coat. If in doubt, request specialist advice! In the case of heavily soiled substrates, pre-clean the substrate with a suitable cleaner and rinse thoroughly with clean water. Dust binding cloths must not be used! Alternatively, we recommend degreasing and dusting the substrate with a mixture of methylated spirits and clear water (1:1) using a lint-free cloth before applying the material!

Application:
The material is ready to use. Do not mix with other materials.

Application method:
Brush or roller applicationApply at an air and substrate temperature of at least +7 °C (ideal range 10 - 25 °C). Stir well before use and apply evenly with a brush or paint roller. If still desired, add max. 5 % water.

Drying (at 20 °C and 65 % relative humidity):
Dust-dry after approx. 1 hour. Can be painted over after approx. 6 - 8 hours.
-Completely dry after approx. 24 hours. Avoid mechanical stress on the surfaces and spray water during this time.
Lower temperatures and higher humidity extend the drying time.

Cleaning the tools:
Clean tools with water immediately after use.

These technical instructions are for your information only and are based on our research and experience. They may be changed by us without prior notice to reflect the latest state of the art. A guarantee
cannot be given due to the various influences during application and processing. In case of doubt, please contact our technical application department. more

Paint

EUR51,05 EUR68,07/1l

Plid Magnetic paint 0.75L anthracite grey for approx. 4m² + paint set/magnetic paint magnetic board

Anthracite grey, 0.75 l

7. Plid Bathroom & kitchen paint 5l for approx. 30m²/ Bathroom paint Kitchen paint Damp room paint Wall

The Plid bathroom and kitchen paint is a highly opaque specialty paint specifically designed for use in damp rooms. This wall paint not only provides effective protection against mold and fungal growth but also features high coverage and low odor application. It is suitable for both new and renovation coatings in indoor areas, particularly in spaces with inadequate ventilation. The paint can be applied to various surfaces such as interior plaster, concrete, aerated concrete, and drywall. Application is straightforward with standard painting tools, and the paint can be easily stirred and applied evenly. After a drying time of approximately 4 to 6 hours, the surface can be repainted, allowing for flexible handling. This bathroom and kitchen paint is therefore a practical solution for anyone seeking a durable and protective wall coating for their damp rooms.

- Highly opaque specialty paint with mold protection
- Suitable for new and renovation coatings in damp rooms
- Applicable on various surfaces such as concrete and drywall
- Low odor and splash- and drip-resistant
- Repaintable after 4 to 6 hours. more

Paint

EUR43,91 EUR8,78/1l

Plid Bathroom & kitchen paint 5l for approx. 30m²/ Bathroom paint Kitchen paint Damp room paint Wall

White, 5 l

8. Plid Insulating paint 0.75L white + painting set / wall paint nicotine paint interior paint

The LH insulating paint from Plid is a highly effective, cement-based interior paint specifically designed to isolate stubborn stains such as nicotine, soot, and water. This paint is particularly well-suited for problematic areas like basements or heavily smoked rooms, where conventional water-based paints often fail. The application is straightforward and requires good ventilation during processing. The paint has a matte finish and covers approximately 2.6 square meters per coat. It is overpaintable and reaches its final hardness after 48 hours. Careful preparation of the substrate is crucial for achieving optimal results. The insulating paint is not suitable for gypsum-containing surfaces and should be applied at temperatures above 8 °C. The painting set allows for easy and efficient application, making this solution ideal for renovation projects.

- Highly efficient isolation of water, nicotine, and soot stains
- Suitable for mineral substrates such as concrete and brick
- Prevents salt efflorescence and further masonry damage
- Easy application with brush or roller
- Matte finish for an appealing look. more

Paint

EUR35,58 EUR47,44/1l

Plid Insulating paint 0.75L white + painting set / wall paint nicotine paint interior paint

White, 0.75 l

9. Plid Latex paint 5L white for approx. 30m² / washable wall paint kitchen paint interior paint

The brand latex paint from plid is manufactured in Germany. The latex paint is a particularly hard-wearing wall paint, which is why it is perfect for use on surfaces that need to be washed down very frequently. The latex paint is also highly opaque, low-splatter and very economical. The latex paint can be applied using prinzwork tools, for example.

Intended use:
Particularly suitable for highly durable interior coatings on glass fibre decor fabric, relief and embossed wallpaper. For weatherproof coating on plaster, concrete, fibre cement. Low filling, non-sludging.

COATING STRUCTURE AND APPLICATION TECHNIQUE:
Read labelling before use! The product must be stirred well before use. The substrate must be clean, dry, grease-free and sound. Loose paint and chalking old coats must be removed and washed-off substrates must be stabilised with a deep penetrating primer. New plaster or concrete substrates must also be primed with a deep penetrating primer. On vinyl foam wallpaper, the plasticisers it contains may cause a sticky effect on the dried surface after painting over.

1. coating structure on plaster and concrete, interior
a) Prepare the substrate accordingly.
b) Prime or consolidate critical substrates accordingly.
c) Pre-coat 1 x with latex paint diluted with 15 % water.
d) Apply 1 - 2 coats undiluted

2. coating structure on old coatings or renovation coating
a) Prepare the substrate accordingly.
b) Prime or consolidate critical substrates accordingly.
c) Apply 1 - 2 top coats undiluted.

Yield:
approx. 6 - 7 m2/ltr., with one coat, depending on the absorbency of the substrate
Diluent:
Water
Tools:
Paint roller, flat brush, airless sprayable
Cleaning the tools:
Immediately after use with soap and water

Drying time: (at 20°C, 65% relative humidity)
Dust-dry/solid to the touch: after approx. 2 - 3 hours
Recoatable: after approx. 8 hours
completely dry: ---
Lower temperatures and higher humidity
extend the drying time!

These technical instructions are for your information only and are based on our research and experience. They may be changed by us without prior notice to reflect the latest state of the art. No guarantee can be given due to the various influences during application and processing. In case of doubt, please contact our technical application department. more

Paint

EUR53,43 EUR10,69/1l

Plid Latex paint 5L white for approx. 30m² / washable wall paint kitchen paint interior paint

White, 5 l

10. Plid Allgrund rust primer 5L white for approx. 450m² /Active rust protection primer

The Plid Allgrund Rust Primer is a versatile product specifically designed for treating metal surfaces. Made in Germany, this primer offers active rust protection and is ideal for renovating and redesigning old metal surfaces. It is characterized by its high opacity, providing an optimal base for subsequent coatings with synthetic resin paints. The Allgrund primer can be used both indoors and outdoors and is suitable for various substrates such as steel, galvanized steel, aluminum, and plastics. The application is straightforward, as the product is ready to use and can be applied with a brush or roller. Before application, it is important to thoroughly prepare the substrate to ensure adhesion and the effectiveness of the rust protection.

- Active rust protection for durable metal surfaces
- High opacity for a perfect base coat
- Suitable for various substrates such as steel, aluminum, and plastics
- Ready to use for brushing and rolling
- Can be overcoated after just 2 hours. more

Paint

EUR71,28 EUR14,26/1l

Plid Allgrund rust primer 5L white for approx. 450m² /Active rust protection primer

White, 5 l