Best selling Solar energy equipment from my-PV
On this page you'll find a ranking of the best my-PV products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. my-PV Power Controller
The my-PV power controller AC THOR #20-0100 is an advanced PV power manager that allows for stepless control of power from 0 to 3 kW. This device is designed to optimize the use of solar energy for water heating and electric heating systems. Through intelligent control, the controller automatically adjusts the energy distribution to match the availability of photovoltaic power and the current heat demand. This not only ensures high residential comfort but also efficient use of the generated solar energy. The AC THOR is easy to install and operate, thanks to its user-friendly touch display. Additionally, the my-PV Cloud provides a comprehensive overview of energy consumption and system performance, allowing for easy monitoring and adjustments. The controller is suitable for both modern and renovated buildings and can be integrated into existing heating systems or replace conventional systems.
- Stepless control of power from 0 to 3 kW
- Easy installation and operation via a touch display
- Automatic adjustment of energy distribution to heat demand
- Integration into existing heating systems or replacement of conventional systems
- Compatible with my-PV Cloud for comprehensive monitoring and control.
2. my-PV Sol•Thor
My-PV SOLTHOR 0 - 3.6 kW, Interfaces: None, connection: DC. Efficient and self-sufficient heat generation. Infinitely variable control output from 0 - 3.6 kW. No inverter required. Loss-free conversion of all solar power into heat. Scalable from 1 - 10 photovoltaic modules. Also works in the event of a grid failure. No authorisation from the grid operator required.
3. my-PV Ac Elwa 2
AC Elwa 2 is a 0 - 3.5 kW linearly controlled hot water heating device for grid-connected photovoltaic systems and the successor to the proven AC ELWA-E. To maximize the self-consumption of your current PV system, AC Elwa 2 uses excess photovoltaic energy to heat your water. The increasing independence also protects against unpredictable or rising operating costs. With linear control, the PV feed-in power can be regulated to zero.
4. my-PV 20-0650
My-PV screw-in heating element 20-0650
Manufacturer: my-PV
Designation: Screw-in heating element 9 kW without thermostat
Type: 20-0650
Connected load: 9 kW
Version: Screw-in heating element
Further details: This screw-in heating element was developed especially for use with the Photovoltaic Power Manager, AC THOR and ACTHOR 9s. It is 3-phase, 3x230 V, 50Hz, without thermostat, with STB, and includes a 3m mains cable with safety plug. Dimensions: WxHxD 88x88x873 mm. EAN: 9120095460211.
5. my-PV Elwa
ELWA is a 2 kW photovoltaic water heating device, perfectly suited for those who want to use their solar power exclusively for the production of hot water. The direct current from the photovoltaic modules is transmitted directly to the built-in heating element and immediately converted into heat without any loss. The integrated MPP tracker ensures that the PV generator always operates at the optimal working point, similar to a PV inverter. The ELWA operates independently of the power grid, as it is powered by the PV generator, making it a pure off-grid operation. A rotary knob allows you to set the desired hot water temperature, and the LED indicators provide information about the current device status. Schuko plug.
6. my-PV Temperature sensor for SOL-THOR Manager
Sensor
- Specifically designed for the AC-THOR PV Manager from my-PV
- Can be easily connected to the device
- Includes 5 m cable.
7. my-PV AC-Thor
The my-PV temperature sensor provides the power managers AC-THOR and AC-THOR 9s with crucial data for performance regulation. It helps ensure that water heaters efficiently utilize solar power and adjust heating output based on the measured water temperature. With a cable length of 5 m, installation is highly manageable and allows for precise temperature measurement. Simply connect it and get started immediately without needing additional settings. For applications where higher temperatures are desired, such as over 90 °C in the buffer storage, temperature sensors are required alongside the screw-in heating elements.
About the temperature sensor:
- Hot water generation using solar power
- Compatible with 2 power managers
- Precise temperature measurement
- Heating support
- 5 m long cable
- Warranty: 2 years
- Easy installation
Technical specifications:
- Cable length: 5 m
- Weight: 130 g
- Sleeve diameter: 6 mm
- Dimensions: 5000 x 6 x 6 mm
Delivery includes:
1x my-PV temperature sensor for AC-THOR and AC-THOR 9s.
8. my-PV USB interface for all ELWA devices
The my-PV USB interface (MPN: 12-0110) has been specifically designed for the electric water heating devices of the ELWA series, offering you maximum functionality and safety. With the 1.5 m long USB cable, it ensures a seamless connection between your Windows PC and the internal IR interface of the ELWA devices. This allows you to view and analyze all your data at your convenience. The installation of the license-free "Virtual Com Port Driver" from the renowned company FTDI on your PC is straightforward and enables reliable communication between the devices.
Overview of the interface:
- Connection element
- Communication via interface
- 1.5 m long USB cable included
- Easy installation
- 2-year manufacturer warranty
Scope of delivery:
1x ELWA USB Interface
1x 1.5 m USB cable
1x User manual.
