Top-rated products in the Cable switches category
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Ehmann Cord dimmer
The desired brightness can be set using the slider; the device is switched on and off at the separate switch without changing the set brightness. The orientation light on the device makes it easier to find the device even in the dark. With the various connection options, the cord dimmer can be used alternatively as an intermediate or terminal device. The device has a built-in fine-wire fuse, which can be easily changed by the user if required. Suitable for lamps with protective conductor connection.
2. interBär Intermediate switch
Cord intermediate switch 250 V/AC 16 A IP44Technical data: Imprint motif: None - Illumination type: None - Functions (switch/button): latching - Content: 1 pc. - Product type: Cord switch - Product dimension, width: 52 mm - Product dimension, height: 30 mm - Product dimension, length: 97 mm - Switching voltage: 250 V/AC - Switching position: 2 x off/on - Switching current (max.): 16 A - Switching current inductive: 4 A - Temperature (max.): +85 °C - Temperature (min.): -40 °C - Type (manufacturer type): 9002-004.01 - Further technical data: Protection class: IP44.
3. Digitalstrom Light cord dimmer S
Light cord dimmer S in white. For connecting lights of protection class II. Controls connected lights (depending on type, up to a maximum of 150 W) via a 230V line. Turn on, turn off, and dim (when using dimmable bulbs). Push-button switch on the top of the housing for operating the connected light; the second button can be freely configured. Simply connect your freestanding lights (floor or table lamps) of protection class II directly to your digitalSTROM installation with the digitalSTROM cord dimmer GE-SDS200-CW. Just replace the existing lamp cable with the digitalSTROM cord dimmer, and the respective light is automatically ready for operation and integrated into your digitalSTROM network. With this retrofit, the light can be immediately turned on and off or dimmed using the configurable push-button switch of the cord dimmer.
Additional practical features: The second switch of the push-button can be freely configured to control, for example, blinds or other functions. Furthermore, the cord dimmer has an LED status indicator and disconnects the connected load in case of overload or short circuit. It then automatically reconnects it.
Digitize and network your home with digitalSTROM. With digitalSTROM, all devices in the house are digitized and networked via the power line. Control your entire home easily and conveniently using voice commands, your smartphone, or light switches. The installation is virtually invisible and can be carried out at any time and very easily. digitalSTROM makes the energy consumption of each individual device transparent, giving you the opportunity for optimization. A connected home is also safer than a non-connected one, as special applications protect the residents and the entire household. With digitalSTROM, you make your home future-proof and ready for updates in the long term.
4. Max Hauri Cord Dimmer Universal
Universal light cord dimmer. This cable device is compatible with dimmable LED lamps, incandescent lamps, and halogen lamps. It is suitable for 5-100 W incandescent bulbs, 3-60 W LED RC, and 3-20 W LED RL. Dimming type: universal. Mounting: intermediate cable mount.
5. interBär Cord dimmer Intermediate dimmer 20 300 VA
The interBär cord dimmer is a versatile cord switch designed for dimming various types of lamps. With a switching capacity of 20 to 300 watts, this dimmer is ideal for use with low-voltage halogen lamps, high-voltage halogen lamps, and incandescent bulbs. The transparent design allows for discreet integration into different living environments, while the simple operation enables flexible adjustment of light intensity. The cord dimmer is a practical solution for anyone looking to create customized lighting in their spaces. It can be easily integrated into existing lighting systems and offers a user-friendly way to change the atmosphere of a room.
- Suitable for low-voltage and high-voltage halogen lamps as well as incandescent bulbs
- Easy installation in existing lighting systems
- Flexible light intensity adjustment for personalized room design.
6. Ehmann LED cord dimmer T 2607 white
LED Inline Dimmer
This phase-cut dimmer features a slider for brightness adjustment and an on/off switch. It offers flicker-free dimming thanks to adjustable minimum brightness and includes an integrated micro fuse (5x20mm/1A). The cable connection can be made from either side, with two strain reliefs for flat and round cables. It has L, N, and PE connections with screw terminals for cables up to 5mm² and additional strain reliefs for cables up to 1.5mm². This dimmer is suitable for incandescent lamps, high-voltage and low-voltage halogen lamps with conventional transformers (7-110W/VA), as well as dimmable LED lamps (3-35W). The dimensions are 130x59x35mm.
Technical Data
EAN: 4012096003854
Product Group: Inline and Small Switches
Manufacturer: EHMANN
Delivery Item Number: 2660x0700
Color: White
Voltage: 230V.
7. Bodo Ehmann In-line cord LED dimmer
Switch type: Button
Max. supported power: 35W
Nominal voltage: 230 V
Series: T29.08
These dimmers have been extensively tested for use with LED lights. A complete list of all compatible LED lamps can be accessed via the QR code. Electronic LED cable dimmer from Ehmann. This LED cable dimmer switch from Bodo Ehmann operates quietly and can be installed in most fixtures using a universal connector. Thanks to a true on/off switch, there is no power consumption in standby mode, saving energy. The brightness can be adjusted from minimum to maximum over a wide range, resulting in flicker-free operation of the light at this level. Equipped with electronic overload and short-circuit protection as well as overheating protection through a fuse.
Features and benefits:
- Suitable for dimmable LED lamps, LED drivers for incandescent lamps, and high-voltage halogen lamps
- Integrated into most fixtures
- Flicker-free light
- No power consumption in standby, with on/off switch and dimmer slider
- Quiet operation.
8. interBär Cord intermediate switch 250 V/AC 2 A
The interBär cord switch is a practical solution for controlling electrical devices. With a rated voltage of 250 V and a rated current of 2 A, this switch is suitable for various applications where simple on and off control is required. The housing is screwed together, providing a robust construction that ensures durability and safety. The switch is compatible with both flat and round cables, making it versatile. The integrated strain reliefs ensure a secure connection and minimize the risk of cable damage. With a clear on/off switch, operation is intuitive and user-friendly.
- Single-pole design for simple control
- Suitable for flat and round cables
- Robust, screwed housing for increased safety
- Integrated N and PE terminals for easy installation.
9. Kopp Intermediate cord switch 1913
The Kopp cord switch 1913 is a practical and functional accessory for controlling electrical devices. With its robust construction and strain relief, this cord switch offers a reliable solution for various applications. The switch allows for easy on and off operation of devices with a rated current of 2 amps and a rated voltage of 250 volts. The silver color gives the product a modern and appealing design that fits harmoniously into different environments. The cord switch is suitable for use in homes and offices, providing user-friendly handling. It is an ideal choice for anyone who values quality and functionality.
- Pull switch design for easy operation
- Rated current of 2 amps for versatile applications
- Robust construction with strain relief for enhanced safety.
10. Bachmann Pedal intermediate switch
The Bachmann foot switch is a practical and functional device designed for the easy control of electrical appliances. With a rated voltage of 250 volts and a rated current of 2 amperes, this cord switch is ideal for use in various applications. The housing and button are kept in a simple black color, allowing for discreet integration into different environments. The snap-on design of the housing ensures easy installation, while the screwed strain relief and screw contacts provide a secure connection. The switch is equipped with two connection terminals suitable for both 2- and 3-core cables, increasing flexibility in usage. This foot switch is a reliable choice for anyone seeking a user-friendly and durable solution for controlling their electrical devices.
- Single-pole switch for easy operation
- Suitable for 2- and 3-core cables
- Snap-on design for straightforward installation
- Sturdy plastic housing for durability.
