
Magni Controller CW 400 up to 4 HK u 2 WW-LK, ATgef.
7738113412 m
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
For the control of simple to complex heating systems, additional control of 2x storage tank charging circuits for hot water preparation, a solar hot water preparation, a solar heating support as well as an EMS2 ventilation system, large, graphic display, touch keys and plain text display, consumption and efficiency display for the heating unit, diagnostic menu with monitor values of the heating system, malfunction display with error memory as well as function tests.fault display with error memory as well as function tests, graphic configuration and display of solar systems, a ventilation unit and/or a fresh water station, intelligent control functions such as "SolarInside-ControlUnit" for maximum solar yields, intelligent fault detection and "OptiEnergy" for hybrid systems with air-water heat pump and condensing boilers, online solutions: HomeCom Easy, HomeCom Pro, Bosch SmartHome and KNX, can be used with: (Olio)Condens, CERAPUR, SUPRAPUR, SUPRASTAR...-O, CERASTAR, CERAMINI, Vent 4000, Flow 8000, Internet gateway MB LANx and integrated variants
Installation instructions in accordance with § 13 NAV
Please note that units with a connected load of 230V are supplied with an earthed plug or a fixed connection (without plug), depending on the power rating.
If the unit has a fixed connection, a specialist company must be commissioned with the installation.
All units with a connected load of 400 V or more must be operated via a suitable power connection and may only be connected by a qualified electrician.
For units with a rated power of more than 12KW, approval from your network operator is required. For this purpose, please contact the network operator before installation.
or to an installation company registered in the grid operator's list of installers. Such an installation company will assist you in obtaining the necessary approval from the respective grid operator.

Magni Controller CW 400 up to 4 HK u 2 WW-LK, ATgef.
7738113412 m
The HVK strand from Helukabel is a high-quality single conductor known for its reliability and versatility. With a cross-section of 16 mm² and a rated voltage of 750 volts, it is ideal for various applications in electrical installations. The strand is made of copper, providing excellent conductivity, while the insulation made of polyvinyl chloride (PVC) ensures additional protection and durability. This strand is suitable for use in measurement category CAT III up to 300V, thus meeting high safety standards. The red color allows for easy identification and is particularly advantageous in industrial applications. The strand is available in meter lengths, allowing for flexible adaptation to individual project requirements.
- High-quality copper strand for optimal conductivity
- Suitable for applications up to 750 volts
- Insulation made of durable polyvinyl chloride (PVC)
- Flexible in application due to meter lengths.

The HELUTHERM high-temperature cable from Helukabel is a specialized data cable designed for applications in demanding environments. With a cross-section of 2.5 mm² and a nominal voltage of 750 volts, this product offers reliable performance and safety. The use of polyolefin as insulation material ensures high temperature resistance and durability, making it ideal for industrial applications. The copper conductor provides excellent conductivity, while the measurement category CAT III guarantees high transmission quality. The outer diameter of 3.5 mm allows for easy handling and installation. This bulk cable is particularly flexible and can be tailored to the specific requirements of the project.
- High temperature resistant due to polyolefin insulation
- Suitable for applications up to 750 volts
- Excellent conductivity thanks to copper conductor
- Measurement category CAT III for high transmission quality.

Helukabel High-temperature wire HELUTHERM
1 m
Control and connection cable, especially designed for industrial ambient conditions. Suitable for use in dry, damp, or wet rooms under normal mechanical stress. For outdoor use, consider the temperature range and ensure UV protection. Designed for free movement without tensile load or forced guidance, as well as for fixed installation.
Applications include mechanical engineering, plant construction, painting plants, heating and air conditioning technology, and power plant technology. The cable features an optimized, small outer diameter, resulting in a reduced space requirement. It offers high insulation safety with a 4 kV test voltage. The production process is free of paint wetting impairment substances (LBS-free and silicone-free), making it suitable for painting systems.

The Siemens Profibus cable underground cable 6XV1830-3FH10 is a high-quality bus cable specifically designed for use in industrial applications. With a length of 1000 meters, this cable provides a reliable connection for data transmission in Profibus networks. The use of polyvinyl chloride (PVC) for both the cable material and insulation ensures high flexibility and resistance to environmental influences. The cable is suitable for underground installation and meets the requirements for safe and stable data communication. The two conductors enable efficient signal transmission, while the outer diameter of 10.8 millimeters allows for easy handling and installation. This Profibus cable is an ideal solution for companies that rely on robust and durable connection technology.
- Suitable for underground installation
- Made from high-quality polyvinyl chloride (PVC)
- Two conductors for efficient signal transmission
- High flexibility and resistance to environmental influences.

One end with earthing contact plug, one end approximately 30 mm stripped with wire end ferrules.

As - Schwabe Connection cable
3 m
The VDE-registered ÖLFLEX® Classic 110 PVC cable from LAPP is suitable for a wide range of applications, such as wind energy or heating and air conditioning technology. The Lapp cable is designed for both permanent installations and occasional flexible use without tensile stress during free, non-continuous movement. It can be universally used for wiring internal machine and cross-plant control circuits in dry and damp environments. The 4 kV test voltage ensures high insulation safety.
About the PVC control cable
- Cable size: 5G0.75
- Gray PVC sheath
- Flame-retardant
- Oil-resistant
- Torsion-resistant
- Classified fire behavior
- VDE-tested quality
- Type: ÖLFLEX® CLASSIC 110
- Conductor material: bare copper
- Chemically resistant
Technical data
- Test voltage: 4000V
- Rated voltage: U0/U: 300 / 500 V AC
- Number of conductors: 5G (with protective conductor)
- Conductor cross-section: 0.75mm²
- Temperature, fixed installation: -40°C to +80°C
- Temperature, occasionally moved: -15°C to +70°C
- Minimum bending radius, fixed installation: 26.8mm
- Minimum bending radius, occasionally moved: 67mm
- Torsion: At +/- 150 °/m and min. 5°C up to 5000 torsion cycles
- Torsion: At +/- 150 °/m and min. -20°C up to 2000 torsion cycles
Scope of delivery
1x Lapp ÖLFLEX CLASSIC Lapp cable 110 5G0.75.

Lapp ÖLFLEX CLASSIC 110 5G0.75 1119105 by the metre
100 m
The UNITRONIC® SPIRAL spiral cable from Lapp Kabel is a highly flexible data and control cable specifically designed for use in measurement, control, and regulation technology. With a robust PUR outer sheath, this cable offers excellent resistance to UV radiation and oils, making it ideal for demanding applications. The unshielded construction allows for precise impulse transmission, while the notch-resistant and cut-resistant properties of the material ensure the cable's durability. The cable is available in a spiral length of 500 mm and a maximum extension length of up to 2000 mm, making it particularly suitable for portable machines and devices. The use of bare copper wires as conductor material ensures high conductivity and reliability in signal transmission. The UNITRONIC® SPIRAL is therefore an excellent choice for applications in the electronics industry as well as in conveyor and transport systems.
- UV-resistant and oil-resistant
- Highly flexible with a maximum extension length of up to 2000 mm
- Notch-resistant and cut-resistant for increased durability
- Suitable for use in measurement, control, and regulation technology
- Conductor material made of bare copper wires for high conductivity.

VAILLANT 0010027984 Raised plinth for increased (10027984).

The Donau Elektronik 218-500 stranded wire is a high-quality cable that stands out for its flexible and flat design. With a cross-section of 2 x 0.14 mm², this product is ideal for various installation applications. The stranded wire is wound on a plastic spool in a convenient length of 500 meters, making handling and storage easier. The combination of red and black plastic insulation not only provides clear identification of the conductors but also offers reliable insulation that meets the demands of modern electrical installations. This stranded wire is an excellent choice for professionals and hobbyists who value quality and flexibility.
- Flat and flexible design for easy handling
- Cross-section of 2 x 0.14 mm² for versatile applications
- Plastic insulation for reliable safety
- Convenient 500-meter length on a plastic spool.
