Floor heating
EUR215,20
AEG Haustechnik Basic Thermo Floor TBS TB 160/2 Set Plus, electric underfloor heating, complete set 2 m², 160 W/m²
Best selling Floor heating
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. AEG Haustechnik Basic Thermo Floor TBS TB 160/2 Set Plus, electric underfloor heating, complete set 2 m², 160 W/m²
The electric floor heating system is particularly well-suited for large areas with clear geometry and ceramic floor coverings, such as tiles or natural stone. It is ideal for use in commercial spaces. With the help of a programmable comfort room temperature controller featuring a weekly program, temperatures can be adjusted to personal preferences. The set includes a thin-bed heating mat, a corresponding controller, and installation materials.
Application area: Electric underfloor heating as a cost-effective heating alternative to traditional underfloor heating. It serves as a supplementary or complete system in low-energy and passive houses. Ideal for tiles in bathrooms, conservatories, living rooms, and basements. When laid in a leveling layer, it can also be used under carpets or other soft coverings.
Comfort features: Even temperature distribution across the floor. Convenient operation with the AEG thermostat via touchscreen. Set content Set Plus: heating mat, controller, sensor, and conduit.
Energy saving: Energy-saving features – heat is generated directly under the floor covering and is distributed with minimal losses, providing quick and precise heat delivery, e.g., under tiles.
Safety and quality: High-quality, durable heating cable with FEP insulation, suitable for installation in damp areas. Self-adhesive carrier fabric with sewn-in heating conductor.
Installation: New - Now with protective film for even easier and cleaner installation. Simple installation of the self-adhesive heating mats in the walking area directly on the screed in tile adhesive, beneath the floor covering. No full surface installation required. Only one connection line.
Scope of delivery: 2 m² basic heating mat set TBS TB 160/2 Set Plus, heating mat, floor temperature controller, conduit for laying the temperature sensor, assembly and operating instructions, expandable with individual mats TBS TB 160/2 up to 8.
2. Devi Thin-bed heating mat 140F0418
Devi Thin Bed Heating Mat 140F0418
Manufacturer: Devi
Description: Thin bed heating mat 100 W/m², 2.5 sqm
Type: 140F0418
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 250 W
Power: 100 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 2.5 m²
Length: 5000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
Further details:
The thin bed heating mat comes with a connection cable and a suitable sensor protection tube DN10 with a red cap. The self-adhesive thin bed heating mat is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating output: 100 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 2.5 m², 0.5 x 5.0 m.
3. Devi Thin-bed set 300 W, 2.0qm 140F1652 with WLAN thermostat
Danfoss Thin Bed Set 300W 140F1652
Manufacturer: Danfoss
Designation: Thin Bed Set 300W
Type: 140F1652
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-300 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 2 m²
Length: 4000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Danfoss Thin Bed Set 300W 140F1652: additional details
Thin bed set with Wi-Fi thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and has been specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor temperature system is particularly suitable for retrofitting in irregular and/or large rooms, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated temperature limit: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.0 m².
4. Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
Devi Thin Bed Heating Mat 140F0447
Manufacturer: Devi
Description: Thin Bed Heating Mat 150 W/m²
Type: 140F0447
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: Glued
Self-adhesive: yes
Connection power: 0-300 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold conductors: 1
Length of cold conductor: 4000 mm
Suitable for wet rooms: yes
Suitable as surface heating: no
Suitable as roof heating: no
Area: 2 m²
Length: 4000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no
Additional details:
The thin bed heating mat comes with a connection cable and a suitable sensor protection tube DN10 with a red cap. The self-adhesive thin bed heating mat is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in angular and/or large rooms, as the return of the second connection is not necessary. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold conductor: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating output: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10 % / -5 %, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 2.0 m².
Floor heating
EUR234,99
Devi Thin bed heating mat DTIF 140F0447 150W/sqm 2.0 sqm 0.5 x 4.0 m self-adhesive
5. Devi Heating tape in-line 10W/m 230V 50m 140F1223
The heating cable, pipe-mounted 10W/m 230V 50m 140F1223 from Devi is an efficient solution for heating pipes and other applications that require a constant temperature. With a heating power of 10 watts per meter, it provides a reliable heat source specifically designed for use in various environments. The product has a total length of 50 meters and is equipped with an IPX7 protection rating, making it resistant to water and moisture. This makes it ideal for use in damp or wet areas. The connection cable also has a length of 50 meters, allowing for flexible installation. Manufactured in Poland, the heating cable meets high-quality standards and is available in a striking red color. It is suitable for both private and commercial applications, helping to prevent frost damage to pipes and enhance the efficiency of heating systems.
6. Etherma Plug-in heating loop 10m ICE-10 100W 230V for metal pipes 40575
The ICESTOP heating cable protects pipes from ice and consequently from damage. The ICESTOP is a ready-to-plug heating cable with a constant power output of approximately 10 W/m. The encapsulated thermostat is 100% moisture-proof and activates frost protection at temperatures below 3 °C, turning off again at 9 °C. It is suitable only for metal pipes. Protection class: IP X7, compliant, minimum installation temperature: -15 °C, dimensions: 5.5 x 8.5 mm, minimum bending radius: 3 d, plug connection cable: 2 m, 230 V. ICE-10.
7. Devi Thin-bed heating mat set 140F0824 1-900 W professional DTIF 6,0qm 50x120
Devi Thin Bed Set 1-900 W 140F0824
Manufacturer: Devi
Description: Thin bed set 1-900 W DTIF 6.0 m², professional
Type: 140F0824
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-900 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 6 m²
Length: 12000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
Additional details:
Thin bed set with touch thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, assembly instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is unnecessary. The heating cable with additional protective sheath for the use of the RCD is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area: 6.0 m², 0.5 x 12.0 m.
Floor heating
EUR793,94
Devi Thin-bed heating mat set 140F0824 1-900 W professional DTIF 6,0qm 50x120
8. Raychem R-QN-P-3.0M2/TO
NVent Thermal heating mat 230V R-QN-P-3,0M2/T0
Manufacturer: nVent Thermal
Designation: Heating mat 230V 160W/sqm, 3sqm, o.Therm
Type: R-QN-P-3,0M2/T0
Design: Heating cable
With support mat: Yes
Fixation of the heating conductor: Other
Self-adhesive: Yes
Supply voltage: 207..253 V
Connected load: 0..480 W
Output: 160 W/m²
Heatsealing band load: 11 W/m
Resistance: 110 Ohm
Number of PTC thermistors: 1
Length of PTC thermistors: 5000 mm
Suitable for damp rooms: Yes
Suitable as open space heating: No
Suitable as roof surface heating: No
Area: 3 m²
Length: 6000 mm
Width: 500 mm
Thickness: 3 mm
With controller: No
With room thermostat: No
With floor temperature sensor: No
nVent Thermal heating mat 230V R-QN-P-3,0M2/T0 is designed for floor heating in renovation projects, on stable subfloors, and under tiles, wood, and PVC. It operates at 230 V with an output of 160 W/m² over an area of 3 m², without a thermostat.
9. Dimplex DCF160S-210W set
Underfloor heating has been on the rise for many years. It's no wonder: especially in homes with tiled floors and in bathrooms, warm floors create an unparalleled feeling of comfort. Those with underfloor heating enjoy invisible warmth, can do without the often intrusive radiators on the walls, and have more design options in their spaces. Given the popularity of underfloor heating, Dimplex has also developed an electric alternative, as we believe that electric heating will be the heating solution of the future. Our thin-bed heating mats are mounted on a carrier mesh and can be installed in tile adhesive or leveling compound. Thanks to the protective wiring for connection to the RCD, they can also be installed in bathrooms or kitchens. The Smart Climate COMFORT FLOOR underfloor heating is easily integrated into the system via the Smart Climate THERMOSTAT (included) and can be controlled both locally and remotely through the SCS app on a smartphone or tablet. Additionally, the thin-bed heating mats are available without accessories to expand the existing set. The Smart Climate System was developed by Dimplex to provide even more energy and cost-efficient heating, fully climate-neutral (when using 100% green electricity). Did you know? Even in ancient Rome, wealthy Romans and bathhouses had underfloor heating: beneath the respective rooms were heating chambers with wood-burning fireplaces that provided warm floors.
10. Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
Devi Thin Bed Set 1-1050 W 140F0825
Manufacturer: Devi
Description: Thin bed set 1-1050 W DTIF 7.0 sqm, professional
Type: 140F0825
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0..1050 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 7 m²
Length: 14000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes
The Devi Thin Bed Set 1-1050 W 140F0825 includes a thin bed set with a touch thermostat, a flexible sensor protection tube DN10 with a red cap, plastic nails, and installation instructions. The self-adhesive thin bed heating mat with a connection lead is pre-assembled for installation and has been specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering.
With a low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is not required.
The heating cable, with additional protective sheathing for the use of RCD protection, is applied to a plastic mesh. The length of the connection leads is 4.0 m.
Cold lead: 1 x 4m, 1.0 mm²
Voltage: 230 V
Rated limit temperature: 120 °C
Specific heating power: 150 W/m²
Length load: 11 W
Insulation: PVDF / FEP
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5 °C
Minimum bending radius: 6 x dA
Calculation width: 50 cm
Delivery width: 48 cm
Mat height: 3.2 mm
Protection class: IPX7
Approval: EN 60335-2-96
Area: 7.0 m²
0.5 x 14.0 m
EAN: 5703466216590.
Floor heating
EUR846,94
Devi Thin-bed heating mat set 140F0825 1-1050 W professional DTIF 7,0qm 50x140
Product order
See all products