Execution: Midfield rod for 5 figures. The Sportime Kicker rods Match are Category 2 rods. Category 2 rods are suitable for foosball tables in private settings. These rods are also commonly used in public, supervised areas where foosball is played carefully. The Sportime Kicker rods Match are flexible, perfectly straight, and have a double-nickel plated, smooth surface. In an elaborate production process, these foosball rods are made from steel tubes through many steps. Unlike solid rods or cheaper hollow rods, these rods maintain their straight shape. They can support a load of at least 35 kg and return to their original shape when bent. Another advantage is that hollow rods are lighter than solid rods, allowing for faster play. The inner walls of the rods are made of 3.5 mm thick steel. The steel tubes are industrially alloyed multiple times. In testing laboratories, these rods withstand 8 hours of salt spray testing. The foosball rods have a diameter of 15.8 mm, commonly referred to as 16 mm rods. Typically, foosball sliding bearings have a diameter of 16 mm, so the foosball rods are 0.2 mm thinner to ensure they run in the foosball table bearings with enough grip but minimal friction. The rods have 4 mm holes for attaching the foosball figures. The holes are precisely drilled, spot-on, and parallel through the center of the rods. This allows the screws for the foosball figures to be easily passed through the rods, ensuring the figures stand perfectly side by side. Regarding the position and spacing of the holes, Sportime adheres to the German foosball table tournament standards. The Sportime Kicker rods fit all well-known foosball tables. Details on measurements can be found in the technical specifications. The rods are compatible with all standard plastic foosball handles and are delivered with pre-mounted end caps.