Best Kavan products in the Modelling: tools + accessories category

On this page you'll find a ranking of the best Kavan products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Kavan Iron-on film transparent red 2 meter, width 64cm

Transparent polyester iron-on film for covering model airplanes, roll size 200x64 cm.

The transparent KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive. It is available in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected by a clear film.

The KAVAN iron-on film is resistant to model fuel, glow plug fuel, ignition fuel, and gasoline.

The film thickness is 50-60 µm (including adhesive) and the weight per unit area is 63-65 g/m².

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model-building irons and hot air guns can be used for ironing, with a working temperature range of approximately 95-180 °C. The optimal temperature for attaching to the structure is around 95-100 °C, the temperature for stretching is about 130-140 °C, and for strongly curved surfaces, it is 140-160 °C. 

2. Kavan soldering sleeves m2,5 with slot 10pcs. threaded soldering sleeves

Nickel-plated steel. KAVAN threaded solder sleeves are strong, easy to solder, and reinforced at the transition from thread to tube. Total length: 28 mm. Thread length: 13 mm. KAV0130D. 

3. Kavan Iron-on foil orange 2 meter, width 64cm

Polyester iron-on film for covering model airplanes, roll size 200x64 cm.

The KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive containing pigments with excellent opacity. It is supplied in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected with a clear film.

The KAVAN iron-on film is resistant to model building fuels, glow plug fuel, ignition fuel, and gasoline.

The film thickness is 50-65 µm (including adhesive) and the weight per unit area is 63-70 g/m² (darker colors are slightly lighter than lighter ones).

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model building irons and heat guns can be used for ironing, with a working temperature range of approximately 95-180°C. The optimal temperature for application to the structure is around 95-100°C, the temperature for tensioning is about 130-140°C, and for strongly curved surfaces, it is 140-160°C. 

4. Kavan oar horn 1/4 scale (wide) 34mm 1pair

KAV0076.

5. Kavan Ironing foil silver 2 meter, width 64cm

Polyester iron-on film for covering model airplanes, roll size 200x64 cm.

The KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive with excellent high-opacity pigments. It is supplied in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected with a clear film.

The KAVAN iron-on film is resistant to model building fuels, glow plug fuel, ignition fuel, and gasoline.

The film thickness is 50-65 µm (including adhesive) and the weight per square meter is 63-70 g/m² (darker colors are slightly lighter than lighter ones).

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model building irons and hot air guns can be used for ironing, with a working temperature range of approximately 95-180°C. The optimal temperature for attaching to the structure is around 95-100°C, the temperature for stretching is about 130-140°C, and for heavily curved surfaces, it is 140-160°C. 

6. Kavan Ironing foil light yellow 2 meter, width 64cm

Polyester iron-on film for covering model airplanes, roll size 200x64 cm.

The KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive featuring pigments of excellent opacity. It is supplied in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected by a clear film.

The KAVAN iron-on film is resistant to model building fuels, glow plug fuel, ignition fuel, and gasoline.

The film thickness is 50-65 µm (including adhesive) and the weight per area is 63-70 g/m² (darker colors are slightly lighter than lighter ones).

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model building irons and heat guns can be used for ironing, with a working temperature range of approximately 95-180°C. The optimal temperature for adhering to the structure is around 95-100°C, while the temperature for tensioning is about 130-140°C, and for heavily curved surfaces, it is 140-160°C. 

7. Kavan Iron-on foil light blue 2 meter, width 64cm

Polyester iron-on film for covering model airplanes, roll size 200x64 cm.

The KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive featuring pigments with excellent opacity. It is supplied in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected with a clear film.

The KAVAN iron-on film is resistant to model-making fuels, glow plug fuels, ignition fuels, and gasoline.

The film thickness is 50-65 µm (including adhesive) and the surface weight is 63-70 g/m² (darker colors are slightly lighter than lighter ones).

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model-making irons and heat guns can be used for ironing, with a working temperature range of approximately 95-180°C. The optimal temperature for attaching to the structure is around 95-100°C, the temperature for stretching is about 130-140°C, and for heavily curved surfaces, it is 140-160°C. 

8. Kavan Ironing film grey 2 meter, width 64cm

Polyester iron-on film for covering model airplanes, roll size 200x64 cm.

The KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive with pigments that provide excellent opacity. It is supplied in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected with a clear film.

The KAVAN iron-on film is resistant to model building fuels, glow plug fuel, ignition fuel, and gasoline.

The film thickness is 50-65 µm (including adhesive) and the weight per square meter is 63-70 g/m² (darker colors are slightly lighter than lighter colors).

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model building irons and heat guns can be used for ironing, with a working temperature range of approximately 95-180°C. The optimal temperature for application to the structure is around 95-100°C, the temperature for stretching is about 130-140°C, and for heavily curved surfaces, it is 140-160°C. 

9. Kavan Iron-on foil light orange 2 meter, width 64cm

Polyester iron-on film for covering model airplanes, roll size 200 x 64 cm.

The KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive with excellent high-opacity pigments. It is supplied in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected with a clear film.

The KAVAN iron-on film is resistant to model building fuels, glow plug fuel, ignition fuel, and gasoline.

The film thickness is 50-65 µm (including adhesive) and the weight per unit area is 63-70 g/m² (darker colors are slightly lighter than lighter colors).

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model building irons and heat guns can be used for ironing. The working temperature range is approximately 95-180°C. The optimal temperature for application to the structure is around 95-100°C, the temperature for tensioning is about 130-140°C, and for strongly curved surfaces, it is 140-160°C. 

10. Kavan Ironing foil yellow 2 meter, width 64cm

Polyester iron-on film for covering model airplanes, roll size 200x64 cm.

The KAVAN iron-on film is made from a very thin and lightweight polyester polymer with high strength, coated with a layer of heat-activated adhesive containing pigments with excellent opacity. It is supplied in rolls with a width of 64 cm and a length of 2 m. The adhesive side is protected by a clear film.

The KAVAN iron-on film is resistant to model fuel, glow plug fuel, ignition fuel, and gasoline.

The film thickness is 50-65 µm (including adhesive) and the weight per unit area is 63-70 g/m² (darker colors are slightly lighter than lighter ones).

The shrinkage of the film is 5-10%, evenly in all directions.

Ordinary model-building irons and heat guns can be used for ironing, with a working temperature range of approximately 95-180°C. The optimal temperature for application to the structure is around 95-100°C, the temperature for stretching is about 130-140°C, and for strongly curved surfaces, it is 140-160°C. 

See all products