Best O.S. Engines products in the RC motors category
On this page you'll find a ranking of the best O.S. Engines products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. O.S. Engines Motor OS FS-95V (With F-5050 silencer)
For over 70 years, OS-Engines has been on the market with its model engines, and without exaggeration, it can be said that they hold one of the leading positions in the industry. Displacement: 15.59 cc, Stroke: 23.8 mm, Bore: 29 mm, Power: 1.7 HP at 10,000 RPM, RPM range: 2,100 - 11,000 RPM, Weight without muffler: , Muffler: F-5050, Weight with muffler: 650 g, recommended propellers: 13x7, 13x9, 14x6, 14x8, 15x6, 15x8.
2. O.S. Engines Os A5
Which glow plugs for which engines and applications?
A cold plug should be installed in engines with high displacement, during full throttle operation, when using fuels with a high nitromethane content, in high ambient temperatures, or with poor cooling.
Medium "standard" plugs are recommended for low fuel nitration, in engines with low compression and power, etc. The medium glow plug type is usually the most cost-effective all-round plug and should be the first choice when tuning for the specific engine type.
Hot glow plugs are advisable if the engine has poor idle characteristics, when little nitromethane is used, in engines with low displacement, in very low ambient temperatures, or when the engine is predominantly operated in partial load conditions.
3. O.S. Engines O.S. FS-64V w/F-4050 Silencer
The O.S. FS-64V engine with F-4050 silencer is a highly developed combustion engine specifically designed for use in RC airplanes. With a nostalgic design reminiscent of engines from the 1930s, this motor combines classic aesthetics with modern technology. The FS-64V offers impressive performance and allows the use of propellers in various sizes without any loss of power. The newly designed cylinder head and increased combustion chamber volume provide an authentic 4-stroke exhaust sound and improved performance. The F-4050 silencer is designed to optimize exhaust performance while maintaining the characteristic sound of a 4-stroke engine. This motor is ideal for model builders who value performance and a realistic flying experience.
- Nostalgic design inspired by 1930s engines
- Allows the use of propellers up to 14x6 without loss of power
- Improved cylinder head for a more realistic 4-stroke exhaust sound
- F-4050 silencer with optimized exhaust performance
- Includes glow plug type F as standard accessory.
4. O.S. Engines Candles No. 7 (Medium-Hot)
Which glow plugs for which engines and applications?
A cold plug should be installed in engines with high displacement, during full throttle operation, when using fuels with a high nitromethane content, in high ambient temperatures, or with poor cooling.
Medium "standard" plugs are recommended for low fuel nitration, in engines with low compression and power, etc. The medium glow plug type is usually the most affordable all-round plug and should be the first choice when tuning for the specific engine type.
Hot glow plugs are advisable when the engine has poor idle characteristics, when little nitromethane is used, in engines with low displacement, in very low ambient temperatures, or when the engine is predominantly operated in partial load conditions.
5. O.S. Engines GF40 with F-6040 reso (39400)
The O.S. GF 40 combines the user-friendliness and efficiency of a traditional 4-stroke engine with a gasoline engine. Its quick and powerful response is ideal for scale, sport, and aerobatic models. The mounting points are identical to those of the GT 33 2-stroke engine. The carburetor was developed by O.S. in collaboration with Walbro® specifically for this engine.
Technical specifications:
- Cooling: Air
- Width [mm]: 83.7 mm
- Shaft thread: UNF-5/16-24
- Mounting holes lengthwise [mm]: 54 mm high
- Carburetor: WT GF 40
- Total weight [g]: 1378 g
- Height approx. [mm]: 157.2 mm
- Mounting hole Ø [mm]: 5.2 mm
- RPM range approx.: 1800 - 9000 RPM
- Bore [mm]: 40 mm
- Mounting holes crosswise [mm]: 70 mm
- Displacement [ccm]: 39.96 cm³
- Power kW (HP) at: 3.75 at 9000 RPM
- Recommended propeller: 18x8 - 20x10
- Length to hub: 118.5 mm
- Stroke [mm]: 31.8 mm
- Shaft Ø [mm]: 7.8 mm
- Brand name: O.S.
- Application area: Model aircraft
- Includes muffler: Yes
- Fuel: Gasoline
- Design: 4-stroke gasoline
- Manufacturer's article number: OS39400
- The O.S. GF40 engine operates with "regular" gasoline mixture 1:25.
6. O.S. Engines Max-46AXII (With E-3071 tuned pipe)
For over 70 years, the company OS-Engines has been on the market with its model engines and without exaggerating it can be said that it occupies one of the leading positions. , Displacement: 7.5 cc, Stroke: 19.6 mm, Bore: 22 mm, Power: 1.63 hp / 16,000 rpm, Speed range: 2,000 - 17,000 rpm, Silencer: E-3071, Weight with silencer: 489 g.
7. O.S. Engines Candles Os 3a
Designation before A3
Which glow plugs for which engines and applications?
A cold plug should be installed in engines with high displacement, during full throttle runs, when using fuels with a high nitromethane content, at high ambient temperatures, or when cooling is poor.
Medium "standard" plugs are recommended for low fuel nitration, in engines with low compression and power, etc. The medium glow plug type is usually the most affordable all-round plug and should be the first choice when tuning for the specific engine type.
Hot glow plugs are advisable when the engine has poor idle characteristics, when little nitromethane is used, in engines with low displacement, at very low ambient temperatures, or when the engine is predominantly operated in partial load conditions.
8. O.S. Engines Nut F.spinner Fs120s-sp
9. O.S. Engines Zwischenst.35mm 744b,60fp,61fx,65la,91fx
The O.S. Engines muffler spacer is an essential accessory for RC engines that increases the distance between the engine and the muffler. It is specifically designed for the OS MAX 61FX and 91FX models and provides an effective solution for optimizing engine performance. With a length of 35 mm and a hole spacing of 42 mm, this spacer is a practical addition for RC enthusiasts who value precision and performance. Made in Sweden, it guarantees high quality and durability required for demanding RC applications. The spacer is an indispensable element for anyone looking to optimally adjust their RC engines.
- Length of the spacer: 35 mm
- Hole spacing: 42 mm.
10. O.S. Engines OS For 4-stroke engine "F" Rotary Wankel
Which glow plugs for which engines and applications?
A cold glow plug should be installed in engines with high displacement, during full throttle operation, when using fuels with a high nitromethane content, in high ambient temperatures, or in cases of poor cooling.
Medium "standard" glow plugs are recommended for low fuel nitration, in engines with low compression and power, etc. The medium glow plug type is usually the most affordable all-round plug and should be the first choice when tuning for the specific engine type.
Hot glow plugs are advisable when the engine has poor idle characteristics, when little nitromethane is used, in engines with low displacement, in very low ambient temperatures, or when the engine is predominantly operated in the partial load range.
