This continuous flow cooler essentially replaces the radiator, as the water is regulated down to a temperature set by you. Temperatures of up to 4°C are possible, but please note that condensation can form due to the temperature difference. The temperature can be set in single steps up to 28°C via the display. Appropriate insulation accessories for the hose and CPU are also available. Alternatively, the chiller can be set to a value just below room temperature to avoid the problem of condensation.

Due to the low water temperatures, unimagined possibilities for overclocking are available. The service life of your components is significantly increased. Furthermore, this system is also interesting for no-noise applications, as the chiller can be placed in another room. We recommend integrating the chiller as an additional cold source in a system alongside an existing radiator. This allows you to switch off the normal radiator as needed (for overclocking, benchmarking, or during midsummer), and the chiller will take over the cooling.

Which aquarium size does my continuous flow cooler cool? The manufacturer's information is as follows:
Model / litre specification:
HC-130 / 50-100L
HC-150 / 50-200L
HC-250 / 100-300L
HC-300 / 100-400L
HC-500 / 200-800L
HC-1000 / 300-1000L
HC-2000 / 400-1500L

Here we would like to point out that the manufacturer's specifications were created under optimal conditions. For example, the temperature behavior can vary considerably due to the insulation of the pool, the radiation of the lamps, or sunlight. Therefore, we recommend choosing a larger model when reaching the upper limit of the litre values.

Note on compatibility: The chiller is supplied with connections for 1 inch hose (inner diameter approximately 19 to 20mm). The delivery includes one pair of straight and one pair of 90° angled connectors. To use the chiller with standard connections, we recommend art. 37018 (for G1/4) and 37019 (for G3/8).