PrimaCreator FlexPlate Powder Coated PEI for Bambu Lab X1 / P1 / A1PrimaCreator Flexplate is the upgrade your printer deserves. With its powder-coated PEI, it is the perfect surface for printing, it is very durable and easy to handle. When you have finished printing your model, you can simply remove the print from the plate and move on to your next project.PEI-coatedPEI Ultem (polyetherimide) from PrimaCreator is a reusable, relatively maintenance-free build surface for ABS (with a heated bed) and PLA (hot or cold), but other materials such as metal, wood, PETG, ABS+ and many others are also well suited. You do not need any additional adhesives such as glue or tape. PEI is attractive because it requires no surface pre-treatment and is therefore easy to process. In addition, no support rafts are required for printing on PEI, as the parts adhere directly to the surface without any problems.How to useFix the sheet to the building board with the PEI side facing up. This is very easy thanks to the magnets in the plate. You don't need glue, but if you want to print something large or long-lasting, we recommend the PrimaFix glue stick so that your parts adhere even better and come off even more easily after printing. After printing, simply leave the plate to cool, remove it and bend it slightly. Wipe your PEI surface with 70-91% isopropyl alcohol before each print to ensure that you wipe off any grease or other residue that has accumulated on the surface. This will significantly improve surface adhesion. Use acetone, isopropyl alcohol, methyl alcohol or soap to clean your PEI after use.