At the moment (today!!!!) probably not. be quiet does not have any suitable adapters for the 1200 socket at the moment. However, it is possible that in the foreseeable future (perhaps tomorrow) either the socket will be authorised or a corresponding installation kit will be added. But it could also be that a be quiet Dark Rock Pro 5 is in the pipeline. As a normal consumer, who knows what will be available next week. The be quiet Dark Rock Pro 4 fan itself should certainly provide good cooling for normal use of an i9 10900k. I have one installed on my 9900k myself. Average temperature: 46°. Under extreme load (benchmark software) it reaches approx. 90°.

The Ram bars are about 1 cm too high or you can operate the cooler with only one fan in the middle.

...bei Noctua direkt: https://noctua.at/de/support/noctua-support

Look here: https://www.bequiet.com/de/contact/lga1700mounting There's nothing about the delivery period. But I've already ordered there and it was quick. 2 days if I remember correctly.

Hi, the cooler itself does not have an air flow, that is done by the installed fan(s). It is specified with the product, m³/h, and depending on which other fans you have installed in your enclosure and how efficiently your enclosure allows airflow. The cooler can cool up to 250W power dissipation of a processor, you will find the specification with your installed processor. In connection with the fans you have installed, you can answer your own question. Which processors the cooler reliably cools is specified with the product. I am sure that this cooler will keep your system clean and quietly cool :-)

Hello Joelle, I can say yes to number one. I have too. I can't say anything about the board. Have fun building. Greetings Michael

Unfortunately, no, it does not fit. The cooler is 16.28 cm high and the manufacturer only specifies a maximum height of 16 cm for the cooler.

As you write, you can use CPU_1 and CPU_OPT or a Y-cable and connect both to 1. I would put the blowing fan on 1 if you use both connections.

Hi, this is a normal commercial screwdriver :-) only difference to the mass of the screwdriver is the length, when buying more, pay attention to this.

Sali Adrian, I had exactly the combination of GSkill RGB Ram, motherboard, and this cooler. The two do not work together. I then switched to a Corsair closed loop water cooling system.

Hello Besô, the 2 fans were included in my pack. So you don't need to buy separate fans. But if you still need such clamps for another project, unfortunately I haven't found anything here at DIgitec. I found it at C..King... greetings

Yes it is included.

So why not buy a thermal paste right away?

Yes, it fits, I also have it on a 1200. You just have to pay attention to the RAM height.

Hi, yes, the cooler will definitely fit. The product description includes the socket of your board. The cooler is optimal. Look at your board, each cooler usually protrudes above the RAM slots. There is RAM that is quite high, just make sure that the height of the RAM fits. Have fun!

Very risky. I can't tell you exactly, but the enclosures often really give the maximum to look better. There shouldn't be much space left, if any.

The Dark Rock Pro 4 overhangs about three out of four RAM slots, but thanks to cut-outs on the lower slats you should have no problems up to 46mm height. So your RAM will fit without a problem, but your RGB bars will be partially covered. If you take a look at the be quiet! website, you will see that they have installed exactly your RAM in their example ;) P.S.: I myself am currently using the Dark Rock Pro 4 with Corsair Vengeance Pro RGB (>50mm height). This is also possible with a bit of skill if you mount the front fan a bit higher up. However, this is not a particularly elegant solution and I would not recommend it for a completely new purchase. LG

Hi, I would check with the manufacturer, I think there is an extra version of the Dark Rock Pro 4 for your board. This one sits on an Asus ROG STRIX X570-E GAMING and cools the AMD Ryzen 9 3900X, which is in there until the new AMD CPU is finally available. In any case, the cooling performance is perfect. It is not audible even under stress. Super part, also visually and very nicely finished.

Yes, should work.

The Monster has a cooling capacity of 250W TDP. That also cools a 5950x without problems :)

Hello, the matching screwdriver is included in the delivery, if it is not included, then complain, many greetings

Yes, it fits, but make sure it fits in your case: Height (with fan): 16.28 cm And also check if there is enough space for your desired RAM bars (or if the fan gets in the way). Greetings