If you exchange an old Brother printer for a new one, you will receive CHF 40 back ...

Thanks for the info, helps the other customers. Regarding the plug: Contact Digitec customer support, they will (usually) send you a Swiss plug.

Return is not necessary, it is sufficient if you take a photo of the device designation/serial number and then send it in. Payback only worked with my machine via email with Brother that I received a German machine with a serial number from Germany. This serial number cannot be registered at brother.ch.

By default, printers always come with an "initial" set of toners. However, the content of these toners is smaller compared to the individual toners to be purchased. This means that a large amount of paper cannot be printed with the initial toner set - at least this is the case with colour lasers.

Hello Sportcars No, the LT-5300 does not fit this model. The LT-5300 fits the following models: HL-5350DN, HL-5370DW, HL-5380DN, DCP-8070D, DCP-8080DN, MFC-8370DN, MFC-8380DN, MFC-8880DN, MFC-8890DW. These are all nicely older (>5 years) and hardly available "new" any more. That leaves only Occ. Greetings

On an A4 sheet, it is approx. 4.4mm on each side ...

Hello Baellu I mean, your programme must be able to do this first and foremost, or it must be defined in your programme. In the case of printers, the driver is responsible for this. See https://h30492.www3.hp.com/t5/Drucker-und-AiO-Nutzung/Letzte-Seite-anderes-Papierfach/td-p/452729 Greetings

Yes, you can generally use the multi-functional fold for envelopes, as the paper path is less complex, which is necessary for envelopes to avoid paper jams.

Hi Aromat2009, I have this printer myself but I connected it to my network via RJ45. As far as I know, the printer does NOT have wifi, so it cannot be easily connected from ipad or iphone. What does work is if you have a wifi router. Then you can access the printer via the access point.

I have owned this printer for over two years and also rarely need it (20-50 sheets per month max). The first toner cartridge is still in use and the quality is consistently high. That's why I would recommend it (unless colour printing is needed).

Hello Akkibhatt No, its only a monolaser printer.

If you mean is the printer wifi enabled? No. It can only be connected via cable to a router, access point or repeater, etc., if it is nearby. - It can only be connected via cable to a router, access point or repeater, etc. - if it is nearby - and thus be made available in the network. To begin with, in order to integrate it into the network, I connected it to a wifi repeater: Devolo WiFi Repeater ac For some time now, however, it has been in my mesh network, connected to one of my access points (via cable).