EUR287,51 EUR71,88/1TB
Samsung 870 EVO
4000 GB, 2.5"
Questions about Samsung 870 EVO
What would you like to know?
0 questions and answers
Helpful answer
november is black friday
Helpful answer
It depends on the model. If a SATA disc is installed now, then it works. This is the case for models up to mid-2012 WITHOUT Retina. It does not work for newer models because they use SSDs with a faster interface. On the website ifixit.com you can see all repair/replacement instructions for all MacBook Pro models available. They also list the replacement parts and what the SSD looks like.
Helpful answer
SSDs do not come with any cables. You need a SATA cable and a power cable for SATA drives. In the notebook, this is a combination cable and is available. In the PC, the power cable is available on the power supply unit, you need a SATA cable. 30 cm should be enough.
Galaxus
3 months ago
Helpful answer
The Samsung 870 EVO SSD (500 GB, 2.5") is technically compatible with a MacBook Pro 17" early 2011, as it has a SATA III interface, which is supported in older MacBooks. However, there may be problems during installation or booting due to firmware or software restrictions. It is recommended to use the SSD as a replacement for the existing hard drive and ensure that the operating system is installed correctly.
Automatically generated from the .
Helpful answer
Samsung Electronics GmbH Hello, Thank you for your enquiry. The Samsung SSD 870 EVO SATA III 2.5 inch - 1 TB MZ-77E1T0B/EU is compatible with the iMac (Retina 4K, 21.5″, 2017). The SSD has the following connections: SATA 6 Gb/s interface, compatible with SATA 3 Gb/s & SATA 1.5 Gb/s interface. If in doubt, please contact Apple customer support. Best regards from Eschborn Your Samsung Service Team
Helpful answer
Samsung Electronics GmbH Hello, Thank you for your enquiry. For the Samsung SSD 870 EVO SATA III 2.5 inch - 2 TB MZ-77E2T0B/EU 4 x M3x5mm screws are required. The Samsung SSD 870 EVO SATA III 2.5 inch is sold without accessories. If you still need screws or cables for installation, these must be purchased separately. Best regards from Schwalbach Your Samsung Service Team
That is quite expensive for only 4 TB, I would not recommend it, because you can't use the speed advantage optimally in the NAS by using SSDs. When it comes to power consumption and noise, I would install three 2.5 inch hard disks in the DS923+, as you also have some hardware failure protection. These disks work with CMR recording and do the job. WD Blue Retail (2 TB, 2.5", CMR)
The type of memory and therefore the cost: EVO = TLC memory QVO = QLC memory https://www.heise.de/select/ct/2019/4/1549780209702190
Helpful answer
should not be a problem
Helpful answer
Samsung Electronics GmbH Hello, Thank you for your enquiry. Both SSDs offer their advantages. The Samsung SSD 870 QVO SATA III 2.5 inch MZ-77Q2T0BW is suitable for users who want to equip their laptop or desktop computer with an enormous amount of storage space for everyday use - without compromising on performance. It has a lifetime capacity of 720 TBW. In comparison, the Samsung SSD 870 EVO SATA III 2.5-inch MZ-77E2T0B/EU gives you almost double the lifespan of 1,200 TBW. It would be the right choice if you work in the business sector with large amounts of data and want to transfer them quickly. Intelligent TurboWrite technology enables high write speeds and a large variable buffer ensures impressive performance at a long-lasting high level. For more information, please visit the Samsung website again and enter the SSD you are looking for in the search field. Best regards from Schwalbach Your Samsung Service Team
Helpful answer
Usually the screw is already present in the slot in the motherboard, awaiting to be used. 2.5mm sounds right, but there are other parameters characterizing a screw and you should look on your motherboard manual for those. But first check if the screw isn't there, it probably is.
Merci de contacter le service client :) => https://helpcenter.digitec.ch/hc/fr/requests/new
Helpful answer
Unfortunately not.
Helpful answer
I have never tried it with the migration tool - but 1:1 clones can be created very well with a suitable docking station with two slots. Both 2.5 and 3.5 inch disks fit in there. Here is such a product: Icy Box IB-120CL-U3
30 of 40 questions