Sanyo HR-4/5AU battery, 4/5A, with soldering lug in U-shape
On this page you'll find a ranking of the best Sanyo products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
Sanyo HR-4/5AU NiMH Battery Size 4/5A single cell with solder lug
- NiMH battery with solder tag in U-shape, high capacity with 2150mAh
- Very good performance, long endurance
These powerful rechargeable batteries are professionally assembled to the highest possible standard and are aimed at industrial use, where quality and a good price/performance ratio play a very important role.
Possible applications Industrial applications, mobile communication
System: NiMH battery with soldering lug in U-shape, voltage: 1.2 Volt
Capacity: 2150mAh, Dimensions (LxWxH): 43x17mm, Weight: 35gramm.
Sanyo HR-4/5AU battery, 4/5A, with soldering lug in U-shape
Sanyo 3CR1/3N Lithium battery 3/CR1/3N, 9 Volt with 170mAh
Sanyo Lithium Battery 3/CR1/3N
Sanyo 3/CR1/3N 9Volt Lithium Special Battery
also suitable as replacement battery for Pencheck DTM3100, 010B0018 - 1 x 9V battery lithium suitable for code lock 727E and 72, for remote control garage door 9V 170mAh
Technical data Sanyo 3/CR1/3N battery :
Electrochemical system: Lithium battery (not rechargeable, voltage: 9V
Manufacturer: Sanyo / FDK, Size: 3/CR1/3N, Capacity: max. 170mAh,
Dimensions Height: 32mm, Diameter: 11.8mm, Weight: 10grams
End of Life, if the Sanyo is no longer available, then we will supply an equivalent brand battery.
Sanyo Battery 3CR1/3N, 3/CR1/3N, DTM3100
1 pcs., CR1/3N, 170 mAh
The model Sanyo NCR18650GA is the latest battery from the company Sanyo/Panasonic, which has a particularly high capacity and current output. The Sanyo cell was manufactured for the areas of industry, e-mobility for laptops, LEDs, for model making and all other areas where powerful and enduring batteries are used. The positive terminal is minimally protruding, which means that two cells in a row get contact.Sanyo/Panasonic NCR18650GA up to 10A discharge current constantCell TypeNCR18650GA Li-IonCapacity3500mAhMinimum capacity3350mAhNominal voltage3.6V - 3.7VCharging voltage4.2VDischarge current (constant)2.5C 8Amax. Discharge current (constant)3C 10ALCharge currentup to 0.5C 1635mADischarge voltage2.50VProtective circuit PCBnot presentPluspolflat (Flat Top)ChemistryTrimaxDiameter18.30 mm ± 0.2 mmHeight65.10 mm ± 0.25 mmWeight48 g ± 1 gCharge methodCC-CVSafety instructions:Lithium cells may only be operated with protection electronics!
Please note that lithium cells may only be used by authorized personnel.
Incorrect handling or short-circuiting may result in fire or explosion.Other features:Lithium-ion batteries are thermally stable and are not subject to memory effect.
They work on the basis of lithium and are characterized by a high energy density.Technical data for "Sanyo/Panasonic NCR18650GA 3.6V - 3.7V 3500mAh (positive pole flat) "Notes:For charging lithium ion batteries, a special charger is required, which charges the batteries according to a special charging procedure. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or number of charging cycles.
Sanyo Battery NCR18650GA (plus pole flat)
18650, 3500 mAh
N-110AA 1/3 AA Mignon
This battery can also be used as a replacement for the Panasonic industrial battery P-11AA,
P-11A/E15 1/3AA NiCd can be used as a replacement
- High performance NiCd battery
- Low internal resistance
- up to 1000x rechargeable
- N-110AA or N150AA industrial cell 1/3AA Mignon
- Delivery without solder tag
Unfortunately the Sanyo battery is no longer available. We supply an identical alternative
alternative battery from AccuCell with 150mAh.
Technical data (identical in construction to Sanyo N110AA):
System: NiCd battery
Voltage: 1,2 Volt
Size: 1/3 AA (Mignon)
Dimensions (HxD): 17,5x14,5mm
Sanyo Battery N-110AA Battery NiCd 1/3 AA Mignon without solder tag 150mAh
AA, 150 mAh
The AccuCell NiMH battery suitable as replacement for the Sanyo HF-A1U NiMH battery
- NiMH battery prismatic
- high capacity, long endurance, very good performance
- similar to GP14M, Sony NH-14WM, NH14WM, Sharp AD-N55BT, Aiwa MHB-901, NC-6WM, NH-9WM, SL-CT700, NC-5WM
The GP14M battery is no longer produced, but we supply an identical NiMH battery from AccuCell with 1350 to 1450mAh. These powerful NiMH batteries are professionally assembled to the highest possible standard and are aimed at industrial use, where quality and a good price/performance ratio play a very important role. Possible applications: Industrial applications, mobile communicationTechnical specifications from AccuCell:System: NiMH rechargeable battery, NiMH rechargeable battery
Voltage: 1.2 Volt, Capacity: 1300 - 1450mAh
Dimensions, Dimensions in mm (LxWxH): 67.7 x 16.6 x 5.9, Weight. Weight: 26grammAccu suitable e.g. for AIWA AM-F90, AM-HX30, AM-HX100, HX150, HX200, MHB-901; IRIVER IMP-400/450/550; JVC, VICTOR XM-P55SL, XM-P55/2000, XM-PJ1, XM-PX5, XM-PX50, XM-PX55, XM-PX70, KENWOOD DMC-M7R, DMC-P33, DMC-P55; PANASONIC SJ-MR220, MR200, SJ-SW9MD, SW90MD, MJ88, MJ80, SJ-MJ10, SJ-MJ15, SJ-MJ17, SJ-MJ35, SJ-MJ55, SJ-MJ70, SJ-MJ75, SJ-MJ77, SJ-MJ80, SJ-MJ88, SJ-MJ95, SJ-MR100, SJ-MR200, SJ-MR220, SJ-MR 220, SJ-MR230, SJ-MR250, SJ-MW1, SJ-MW2, SJ-MW3, SJ-SW9MD, SJ-SW90MD, SL-CT700, SL-CT 700; SHARP IM-DR580H, IM-MT770, IM-MT877, IM-MT880, IM-MT880S, IM-MT899H, MD-DR7, MD-MT770, MT877, MT77, MT66, MD-ST77, MD-DS8, MD-ST55, MD-ST66, MD-ST70, MD-ST77, MD-ST700, MD-ST770, MD-ST880, MD-MT90, MD-MT180, MD-MT180H, MD-MT190H, MD-MT200H, MD-MT770, MD-MT866H, MD-MT877, MD-MT877H, MD-MT888, MD-MT888H, MD-MT899H; SONY MZ-E7W, MZ-11, MZ-25, MZ-30, MZ-35, MZ-44, MZ-45, MZ-50, MZ- 55, MZ-70, MZ-75, MZ-77, MZ-80, MZ-90, MZ-500, MZ-5.
Sanyo Battery HF-A1U
Device specific, 1450 mAh