Best selling Water cooling monitoring
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Aqua Computer Passive cooler for aquaero 6, black
Mounting this passive heat sink on an aquaero 6 increases the heat dissipation from the power components and thus increases the output power of the fan ducts. In addition, the water cooler for aquaero 5 (Art. 20023) can be mounted on the passive cooler for active cooling. The passive cooler is also suitable for simultaneous mounting with the Real Time Clock (Art. 70215), but additional mounting material is included with the passive cooler.
Scope of delivery:
Aluminium heat sink for aquaero 6, black anodized
thermal pad
fixing material
Compatible to:
aquaero 6 PRO
aquaero 6 XT
Note: The aquaero 6 and the water cooler are not included in the scope of delivery! If the water cooler is used without a second or narrower elevation (very old variant), washers must be used for installation.
2. Aqua Computer Flow sensor high flow NEXT, OLED, 2x G1/4, RGBpx
Precise inline flow sensor with a magnetic measurement system and temperature sensor. It measures coolant quality and features RGB lighting as well as an RGBpx output. The sensor has two G1/4 inch threads and is suitable for systems with a flow rate of approximately 35 l/h to 1,000 l/h.
3. Aqua Computer Connection cable for VISION flow sensor
Connection cable for connecting the flow sensor, compatible with control devices of the Vision series.
4. Aqua Computer 53026 Indoor Temperature Sensor Wired Temperature & Humidity Sensor
This temperature sensor features an extremely flat design that allows for easy attachment to any surface that needs to be measured. The sensor is equipped with a two-pole connector, and the total length, including the sensor and connector, is approximately 70 cm.
Water cooling monitoring
Quantity discount
EUR7,03 per piece for 2 units
Aqua Computer 53026 Indoor Temperature Sensor Wired Temperature & Humidity Sensor
5. RS PRO Air flow sensor 10 l/min 100 l/min Type For air
The RS PRO air flow sensor is a highly advanced device for monitoring air flow rates in various applications. With a monitoring range of 10 l/min to 100 l/min, this sensor provides precise control over air flow, making it ideal for use in water cooling and other technical systems. The sensor is designed for use with hoses and can operate under pressure conditions of up to 1 MPa. Made from PMMA, a robust material, the sensor ensures high resistance and durability. Additionally, it is suitable for operating temperatures of up to 80°C, making it versatile for different uses. The sensor is an essential tool for professionals who require reliable monitoring of air flow.
- Precise monitoring of air flow rates between 10 l/min and 100 l/min
- Maximum operating pressure of 1 MPa for versatile applications
- Made from robust PMMA for high resistance
- Suitable for operating temperatures up to 80°C.
6. Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button
This cable from Aquacomputer is used for emergency shutdown of the computer in the event of an alarm. It is compatible with the Vision series and is connected to the power button input of the mainboard without affecting the power button. Scope of delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex kryos NEXT with VISION VISION connection terminal for kryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Quick guide: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then test the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown, data may be lost because the operating system and open programmes will not be shut down properly! be terminated properly!
Water cooling monitoring
Quantity discount
EUR7,51 per piece for 2 units
Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button
7. Bitspower Flow sensor G1/4 inch
This is a flow sensor with matte black connections featuring G1/4-inch internal threads. The coolant flows through the flow indicator and drives a black impeller. The rotational speed of the impeller serves as a flow indicator and is output at the back via a 3-pin cable.
Designed for use with an aquaero 4, 5, or 6 from aqua computer, it allows for the reading of the rotational speed, similar to a connected fan, enabling verification of whether the pressure in the water circuit is as desired. To increase the flow rate for better readings, adapters can be placed at the inlet or outlet to reduce the inner diameter to 8 mm or even just 5 mm.
Technical details:
- Material: Brass, matte black
- Connections: Internal threads: 2x G1/4 inch, 3-pin rotational speed signal cable: 600 mm length
- Flow adapters: 5 mm and 8 mm (ID).
8. Koso Durite 14 mm
The Durite 14 mm water temperature adapter from Koso is a practical solution for monitoring water temperature in motorized applications. This adapter allows for easy fitting of the water temperature sensor to hoses with a diameter of 14 mm. It is specifically designed for use in cooling systems and provides a reliable connection to ensure accurate temperature measurements. The adapter is finished in a simple black color, seamlessly integrating into various applications. With its robust construction and ease of use, it is an essential accessory for anyone needing effective temperature monitoring in their motorized devices.
- Allows for the adaptation of the Koso water temperature sensor to 14 mm hoses
- Robust construction for reliable temperature monitoring
- Suitable for various motorized applications.
9. Aqua Computer USB connection cable for VISION, internal
With this USB connection cable, a USB device from Aqua Computer (e.g., VISION) that features a miniature connector can be connected to a free internal USB port (header) on the motherboard. The cable is 100 cm long and comes in a discreet black color, making it very easy to install.
Technical details:
- Color: Black
- Length: 100 cm
- Connectors:
- Miniature connector (USB device from Aqua Computer)
- USB connector (for internal header of a motherboard).
Water cooling monitoring
Quantity discount
EUR9,73 per piece for 2 units
Aqua Computer USB connection cable for VISION, internal
10. Barrow Temperature sensor G1/4
With the Barrow Temperature Sensor G1/4, you can always keep an eye on the temperatures of your system. It provides precise temperatures in real-time, allowing for a simple and effective way to control the heat in your cooling loop.
The G1/4 inch thread of the stop fitting allows you to integrate it into any component with a free G1/4 connection in the loop, such as a distro plate or a CPU or GPU water block.
It uses a classic NTC 10 kOhm thermistor, which connects via cable to a typical 2-pin connector on compatible motherboards or controllers.
Technical details:
- Dimensions: 18 x 20 mm (Ø x H)
- Color: Black
- Material: Brass
- Connection: 2-Pin
- Thermistor: NTC 10 kOhm
- Thread: G1/4 inch
- Total screw-in depth: 5 mm
- Delivery includes: 1x Barrow Temperature Sensor G1/4 - black.
Product order
See all products