NZXT H9 Flow
ATX, mATX, Mini-ITX
Question about NZXT H9 Flow
Hello I currently have a NZXT H510 case that gets very warm Can I use my components- GEforce rtx3070 Corsair vengeance rgb pro Corsair rm 750 Amd ryzen 7 5800x NZXT Kraken x63 Asus rog b550 in the H9 Flow? Do I also need the fans at the bottom? Which ones? Thanks for any tips, I don't know much about this..., merci
Helpful answer
Yep, I also switched from the H510.
You get 3 fans with the case, so you don't really need any extra.
You get 3 fans with the case, so you don't really need any extra.
Hello,
The name of the case says it all! With this case, you can work out a customised flow. Plan well where the air should come in and where it should go out. Make sure that you always let as much air in as out. Correctly positioned, you will never have heat problems.
The name of the case says it all! With this case, you can work out a customised flow. Plan well where the air should come in and where it should go out. Make sure that you always let as much air in as out. Correctly positioned, you will never have heat problems.
Would recommend using all fan slots to get a good airflow from bottom/side to top/rear.
Hello Deanjaggi
I'm sure you can get your components installed.
About the fans: I have fitted all the fan slots. This allows me to run all fans at low RPM even under full load = very quiet
If you do a full assembly you need a fan hub, for example this NZXT Control Hub (5 fans) I hope this helps you, otherwise just ask ;-) Lg Easyk
I'm sure you can get your components installed.
About the fans: I have fitted all the fan slots. This allows me to run all fans at low RPM even under full load = very quiet
If you do a full assembly you need a fan hub, for example this NZXT Control Hub (5 fans) I hope this helps you, otherwise just ask ;-) Lg Easyk
6 black fans are pre-installed, the pc components are very well cooled. i can warmly recommend the housing for any components