Best UHU products in the Glue category

On this page you'll find a ranking of the best UHU products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. UHU Superglue

Liquid superglue with a special 3D filling granulate, for instant, gap-bridging repairs, creates a high-strength, weld-like adhesive bond, can be sanded, drilled and painted. 

UHU Superglue (12 g, 11 ml)
Glue
10,– EUR 909,09 EUR/1l

UHU Superglue

12 g, 11 ml

2. UHU SK.flash.gel 10gTube BL

Non-drip instant adhesive. Ideal for porous materials and for vertical surfaces. Short-term correctable.

UHU SK.flash.gel 10gTube BL (20 g)
Glue
15,45 EUR

UHU SK.flash.gel 10gTube BL

20 g

3. UHU Shoe and leather glue

The tough elastic adhesive film compensates material tensions, is water and temperature resistant (-20°C to +125°C) as well as resistant to oil, diluted acids and alkalis. Material: leather, rubber, soft foams, textiles, felt, cork.
The adhesive surfaces must be clean, dry and free of oil, grease and dust. UHU shoe and leather repair adhesive should be processed at a temperature of approx. +15°C to +30°C. Lower temperatures and high humidity prolong the flash-off time and make good adhesion more difficult. Apply UHU shoe and leather repair adhesive evenly to both parts to be bonded using a toothed trowel or short bristled brush. Apply several coats to highly absorbent materials (leather, fabric, felt, etc.) until a highly visible adhesive film remains. Do not join parts together immediately, but leave them open until the applied adhesive layer is dry to the touch. (Depending on temperature after approx. 10 - 15 min). Then place the parts exactly on top of each other and press them together briefly but firmly. A correction is no longer possible. For the adhesive strength, the level of the pressing pressure is decisive and not the duration. As pressing time seconds are sufficient. After correct gluing, the parts can be further processed immediately. Butanone (MEK), ethyl acetate and nitro thinner are suitable for removing adhesive residues and cleaning the devices.
 

UHU Shoe and leather glue (30 g, 33 ml)
Glue
9,05 EUR 274,24 EUR/1l

UHU Shoe and leather glue

30 g, 33 ml

4. UHU The all-purpose glue

The all-purpose adhesive bonds many materials quickly and permanently. The adhesive bond can be readjusted at short notice. No paper curling. Contains hazardous substances, please observe the data sheet. Liquid. Crystal clear.
Can be readjusted at short notice. No paper curl. Universal - glues wood, wooden materials, plastics, metal, glass, porcelain, ceramics, leather, rubber, felt, cork, fabric, cardboard, paper, etc. Not suitable for Styrofoam, PE, PP.
 

UHU The all-purpose glue (35 g, 20 ml)
Glue
–34%
2,93 EUR was 4,46 EUR 146,50 EUR/1l

UHU The all-purpose glue

35 g, 20 ml

5. UHU plast special 30g BL

Special adhesive for bonding polystyrene parts and a variety of other plastics in model making. Very fine metal needle. Very thin liquid

UHU plast special 30g BL (51 g)
Glue
6,80 EUR

UHU plast special 30g BL

51 g

6. UHU Plus Schnellfest

Solvent free 2-component epoxy resin adhesive for heavy-duty requirements. Working time approximately 90 minutes. Setting time and final strength dependent on temperature. At room temperature hardens after 12 hours. Shock-resistant and resistant to age and humidity.

Also available in the user-friendly double-syringe for easy ejection of the 2 components in the right mixing ratio. Glues metal, glass, porcelain, ceramic, wood, marble, stone, concrete, thermosets, glass fiber, reinforced plastics, hard-pvc, rubber, Styrofoam and more. Not suitable for large glass surfaces, PE or PP.

Surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix 1 part binder with 1 part hardener (equal lengths of strands). Apply adhesive to one side, or to both sides for rough materials. Place the parts together in exactly the right position without applying pressure.
 

UHU Plus Schnellfest (27 g, 24 ml)
Glue
19,88 EUR 828,33 EUR/1l

UHU Plus Schnellfest

27 g, 24 ml

7. UHU Blitzschnell Minis

Extremely strong superglue portioned in 1 g tubes, in a practical storage box. Optimum quality for every application, 3x freshly sealed. Due to its consistency, the adhesive flows into the smallest corners and gaps. Universal, bonds porcelain, ceramics, many plastics (e.g. PVC, ABS), metal, rubber, wood. Not suitable for polystyrene, clothing textiles/leather, PE, PP. Adhesive surfaces must fit exactly, be dry and free of dust and grease. Apply adhesive thinly on one side. The thinner the adhesive film, the faster the bonding. Immediately press parts together and fix briefly. The adhesion is accelerated by breathing on it. After use, wipe the dosing tip dry and close tightly. Keep tubes cool in storage box for longer shelf life. 

UHU Blitzschnell Minis (1 g)
Glue
6,40 EUR

UHU Blitzschnell Minis

1 g

8. UHU Wood glue

Type: Adhesive, Adhesion: None, Color: Transparent, Property: Liquid, Suitable surfaces: Wood, Package size: 250 g.

UHU Wood glue (250 g)
Glue
15,45 EUR

UHU Wood glue

250 g

9. UHU Porcelain repair adhesive

Viscous repair adhesive from a tube for gluing, sealing and repairing porcelain, marble, stoneware and ceramics. UHU porcelain hardens after 24 hours and is resistant to hot water, diluted alkalis and acids as well as conventional cleaning agents. Temperature resistant from -30°C to +80°C. Material: For gluing, sealing and repairing porcelain, marble, stoneware and ceramics. Processing: The repair surfaces must be clean, dry and free of oil, grease and dust. Apply UHU porcelain repair adhesive to both sides of the fracture and allow to dry. Then apply the adhesive again on one side and press the parts together immediately. Leave to dry for 24 hours. Rinse objects such as dishes etc. with hot water before use. Store in a cool and frost-free place. Cleaning: Remove stains with acetone. 

UHU Porcelain repair adhesive (30 g, 30 ml)
Glue
12,58 EUR 419,33 EUR/1l

UHU Porcelain repair adhesive

30 g, 30 ml

10. UHU Max Repair

UHU Max Repair is an extremly strong and flexible adhesive for almost all kinds of repair jobs in- and outside. Suitable for porous and non-porous materials. It is waterresistant (dishwasherproof), gap filling and can be overpainted after curing. It is resistant against vibrations, shock, temperatures from -40°C to + 120°C, against UV (bonding remains elastic). The adhesive is transparent, solvent free and isocyanat free. 

UHU Max Repair (20 g)
Glue
9,22 EUR

UHU Max Repair

20 g