No discipline is as versatile as enduro sports. The bicycles used are true all-rounders, suitable for everything from trail riding to excursions in the bike park. The Black One Enduro stem was specifically developed and designed for these purposes! This stem has undergone the EFBE MTB Gravity TRI test, which is one of the toughest laboratory tests currently available. Even after hundreds of thousands of load cycles in the EFBE lab, this stem could not be pushed to its limits.

To further reduce stress on the handlebars, we developed the Stress Reduction Clamping (SRC) system. The highest stress areas are located at the junction between the stem and the handlebars, particularly at the lower gap of the handlebar clamp where significant loads occur.

The SRC technology prevents the inevitable notch effect that would otherwise occur, as there is no longer a gap present. Only at the top side of the stem clamp is a gap needed for clamping! This results in nearly optimal force transmission all around with reduced notch effect. A significant reduction in stress on the handlebars has been demonstrated in laboratory tests!

This technology is especially recommended for use with carbon handlebars. With a length of 35 mm, it is ideal for modern frames with long top tubes/reach!

* Material: Aluminum 6061 T6
* Handlebar clamp: Ø 35.0 mm
* Length: 35.0 mm
* Height: 40 mm
* Clamp width: 50 mm
* Angle: 8°
* Steerer tube: 1 1/8''
* Weight: 130 g.