Always the right lighting mood in the smart home - control your lights centrally and comfortably via the electrical distribution. The DIN rail dimmer actuator can be professionally mounted in the distribution cabinet on a standard DIN rail and can be controlled directly via commercially available 230-V switches and wirelessly via Homematic IP switches, remote controls, or directly through the CCU3. Note: This is a kit that needs to be assembled! The wireless DIN rail dimmer actuator – 3-channel allows independent control of up to three lights or lighting circuits with a load capacity of up to 200 W per channel. It is suitable for many types of light bulbs. Due to its central installation in the distribution cabinet, there is often no need to intervene in the electrical installation in the room. Existing switches and buttons can be easily reused. For example, it is also very easy to replace impulse switches. Mounting on standard DIN rails is particularly simple thanks to spring-loaded terminals and connectors. Even without programming, the function and wiring can be checked directly on the device during installation thanks to the illuminated display and device buttons. 3-channel phase-cut dimmer actuator for DIN rail mounting on TH35 mounting rail according to EN 60715, mounting width 4 TE. Max load per channel 200 W (lamps with internal ballast up to 100 W). Suitable for many types of light bulbs: dimmable LEDs, dimmable energy-saving lamps, incandescent lamps, HV halogen lamps, NV halogen lamps with electronic transformers. 3 universally usable 230-V switch inputs for conventional wired switches. Integrated illuminated display for status and function indications. Display of inputs and outputs. Display of the actuator's duty cycle - especially important during configuration phases. Display of temperature in the device.