System 3000 Motion Detector Attachment 1.10 m Comfort BT in glossy pure white.

Comfort BT enables automatic lighting control based on heat movement and ambient brightness. It operates with the System 3000 switching, dimming, or auxiliary insert 3-wire. The detection range can be extended in combination with a 3-wire auxiliary insert. When connecting a System 3000 auxiliary insert with a control attachment or mechanical switch to the main unit, the lighting can be turned on or dimmed for the duration of the after-run time. Manual switching between automatic, permanent on, and permanent off is possible on the device.

With System 3000 switching insert: short-term operation.
With System 3000 dimming insert: turns on with the last set brightness or saved switch-on brightness. The switch-on brightness can only be permanently saved via the System 3000 auxiliary insert with control attachment.

Additional functions: base light function, night light function.

Functions with the Gira System 3000 App:

• Setting the brightness threshold
• Sensitivity of the two sensors individually adjustable (0, 25, 50, 75, 100 %)
• Setting the after-run time
• Forced functions: automatic operation, permanent on/off, time-limited on/off for 0.5 to 5 hours
• Presence simulation
• Switch-off pre-warning
• Day operation
• Walk test
• Timer function
• Alarm function

The detection field is horizontally aligned and may not have a limit when used outdoors. Therefore, pay attention to the suitability of the mounting location in outdoor areas or install the motion detector attachment at a height of 2.20 m. A cover for restricting the detection range is included in the delivery.