Schneider Electric I/O Module METSEPM2KDGTLIO22

Manufacturer: Schneider Electric
Designation: Digital I/O Module, 2 Inputs/2 Outputs
Type: METSEPM2KDGTLIO22
Number of Digital Inputs: 2
Number of Digital Outputs: 2
Configurable Digital Inputs: Yes
Configurable Digital Outputs: Yes
Permissible Voltage at Input: 36 V
Type of Input Voltage: AC/DC
Type of Digital Output: Transistor
Output Current: 0.02 A
Permissible Voltage at Output: 40 V
Type of Output Voltage: DC
Short Circuit Protection at Outputs: No
Redundancy Capability: No
Type of Electrical Connection: Plug Connection
Delay Time on Signal Change: 20 ms
Suitable for Safety Functions: No
SIL according to IEC 61508: None
Performance Level according to EN ISO 13849-1: None
Associated Operating Equipment (Ex ia): No
Associated Operating Equipment (Ex ib): No
Explosion Protection Category for Gas: None
Explosion Protection Category for Dust: None
Width: 90.5 mm
Height: 53 mm
Depth: 14.67 mm

Additional details:
Analog I/O option module compatible with PowerLogic PM2x30 devices, providing additional analog inputs and outputs. It features 2 digital inputs for status indication or pulse counting (36 V DC), Off: 0 - 4 V / On: 18 - 36 V. There are 2 digital outputs (transistor) for pulse output, control contact, or alarm contact (load voltage: 40 V DC, load current: 20 mA). Note: The output has negative logic, meaning the voltage source must be connected in parallel to the load. The option modules are mounted on the back of the meter and serve to connect the control voltage and the interface bus. The PowerLogic PM2x30 devices allow a maximum of 1 I/O option module per meter.