Schneider Electric Circuit Breaker A9C63425

Manufacturer: Schneider Electric
Designation: Circuit Breaker 25A 4P D TI24
Type: A9C63425
Tripping Characteristic: D
Number of Poles: 4
Rated Current: 25 A
Rated Voltage: 415 V
Rated Short-Circuit Breaking Capacity according to IEC 60947-2: 10 kA
Voltage Type: AC
Frequency: 50..60 Hz
Switched Neutral Conductor: no
Overvoltage Category: 4
Degree of Pollution: 3
Width in Division Units: 6.5
Installation Depth: 44.5 mm
Factory-installed Additional Devices: Remote Drive
Rated Switching Current of Additional Device: 1 A
Rated Voltage of Additional Device: 230 V
Control Voltage Type of Additional Device: AC
Protection Class (IP): IP20
Size (according to DIN 43880): 3

The remotely switchable circuit breaker Acti 9 Reflex iC60N has a breaking capacity of 20 kA at 220-240 V AC and 10 kA at 380-415 V AC. It is 4-pole, has a rated current of 25 A, a D characteristic, and a Ti24 interface with an insulation voltage (Ui) of 500 V.

Remote switching is achieved via pulse and/or continuous signal according to one of the three adjustable operating modes set by the user. The breaker protects circuits against short-circuit and overload currents and disconnects circuits. With the Ti24 connection option, a direct connection to PLC or decentralized I/O can be made.

The bistable switching mechanism requires no holding power. A green indicator on the breaker guarantees that the contacts are open, ensuring safe working on the outgoing side. The jump switching feature allows for low-wear contact switching. An indicator light shows the operating status.

Control is performed through three adjustable operating modes via the push button on the device's front panel. Protection class IP20. To control inputs Y1 and Y2 using 24/48 V AC/DC, the coupling relay iMDU can be used. Color shade RAL 9003. The remotely switchable circuit breaker Reflex iC60N complies with the standards IEC/EN 60947-2.